hpicfPim6ComponentCRPAdvTimer
HP-ICF-PIM6 ·
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.19
Object
column
SNMPv2-SMITimeTicks
Next scheduled Candidate RP Advertisement.
Context
- MIB
- HP-ICF-PIM6
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpicfPim6ComponentEntry
- Table
- hpicfPim6ComponentTable
- Siblings
- 18
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPim6ComponentIndex A number uniquely identifying the component. Each protocol
instance connected to a separate domain should have a
different index value. Routers that only support membership
in a… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.1 |
| hpicfPim6ComponentCBSRPriority The priority for Candidate BSR router. In BSR election
process the candidate BSR with the highest (numerically
bigger) priority becomes the BSR. If the priority values
are the sam… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.10 |
| hpicfPim6ComponentCBSRHashMskLen Specifies the length (in bits) of a multicast group
address to use when mapping a group to one of the
candidate RPs from the RP-Set whose group-prefix
includes the group. Default … | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.11 |
| hpicfPim6ComponentCBSRMsgInt If this router is the elected BSR, then this is the
interval for sending (multicast out) periodic Bootstrap
(RP-Set) messages on all PIMv6 SM interfaces.
Default is 60 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.12 |
| hpicfPim6ComponentCRPPriority The priority for the Candidate RP for the local PIMv6
domain. Determines which Candidate RPs get selected by
the BSR to be in the RP Set. The smaller value means
the higher priori… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.13 |
| hpicfPim6ComponentCRPAdvInterval The interval at which the Candidate RP transmits
(unicast to the elected BSR) advertise messages in
the local PIMv6 domain. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.14 |
| hpicfPim6ComponentBSRPriority The priority of the Bootstrap Router (BSR) elected
for the local PIMv6 region. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.15 |
| hpicfPim6ComponentBSRHashMskLen The hash mask length of the elected Bootstrap
Router (BSR). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.16 |
| hpicfPim6ComponentBSRUpTime Length of time that the elected Bootstrap Router (BSR)
has been up. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.17 |
| hpicfPim6ComponentBSRNextMessage Time in which the next bootstrap message is due from
the elected Bootstrap Router (BSR). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.18 |
| hpicfPim6ComponentBSRAddrType The IP address type of the bootstrap router (BSR) for the local
PIMv6 region. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.2 |
| hpicfPim6ComponentBSRAddress The IPv6 address of the bootstrap router (BSR) for the local
PIMv6 region. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.3 |
| hpicfPim6ComponentBSRExpiryTime The minimum time remaining before the bootstrap router in
the local domain will be declared down. For candidate BSRs,
this is the time until the component sends an RP-Set
message… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.4 |
| hpicfPim6ComponentCRPHoldTime The holdtime of the component when it is a candidate RP in
the local domain. The value of 0 is used to indicate that
the local system is not a Candidate-RP. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.5 |
| hpicfPim6ComponentStatus The status of this entry. Creating the entry creates
another protocol instance; destroying the entry disables a
protocol instance. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.6 |
| hpicfPim6ComponentCBSRAdmStatus This objects specifies whether or not the router
configured to be a Candidate BSR for the local
PIMv6 region. Default is disabled. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.7 |
| hpicfPim6ComponentCBSRAddrType The IPv6 address type of the Candidate BSR router will
advertise for the local PIMv6 region. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.8 |
| hpicfPim6ComponentCBSRAddress The IPv6 address the Candidate BSR router will advertise
for the local PIMv6 region. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.9 |