hpicfPim6ComponentCBSRPriority

HP-ICF-PIM6 · .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.10
MIB view Table view

Object

column r/w Integer32 
The priority for Candidate BSR router. In BSR election
process the candidate BSR with the highest (numerically
bigger) priority becomes the BSR. If the priority values
are the same, the router with the larger IPv6 address is
the BSR. Default is 0.

Context

MIB
HP-ICF-PIM6
OID
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.10
Type
column
Access
readwrite
Status
current
Parent
hpicfPim6ComponentEntry
Table
hpicfPim6ComponentTable
Siblings
18

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfPim6ComponentIndex
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a…
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.1
hpicfPim6ComponentCBSRHashMskLen
Specifies the length (in bits) of a multicast group address to use when mapping a group to one of the candidate RPs from the RP-Set whose group-prefix includes the group. Default …
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.11
hpicfPim6ComponentCBSRMsgInt
If this router is the elected BSR, then this is the interval for sending (multicast out) periodic Bootstrap (RP-Set) messages on all PIMv6 SM interfaces. Default is 60 seconds.
columnseconds Integer32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.12
hpicfPim6ComponentCRPPriority
The priority for the Candidate RP for the local PIMv6 domain. Determines which Candidate RPs get selected by the BSR to be in the RP Set. The smaller value means the higher priori…
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.13
hpicfPim6ComponentCRPAdvInterval
The interval at which the Candidate RP transmits (unicast to the elected BSR) advertise messages in the local PIMv6 domain.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.14
hpicfPim6ComponentBSRPriority
The priority of the Bootstrap Router (BSR) elected for the local PIMv6 region.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.15
hpicfPim6ComponentBSRHashMskLen
The hash mask length of the elected Bootstrap Router (BSR).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.16
hpicfPim6ComponentBSRUpTime
Length of time that the elected Bootstrap Router (BSR) has been up.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.17
hpicfPim6ComponentBSRNextMessage
Time in which the next bootstrap message is due from the elected Bootstrap Router (BSR).
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.18
hpicfPim6ComponentCRPAdvTimer
Next scheduled Candidate RP Advertisement.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.19
hpicfPim6ComponentBSRAddrType
The IP address type of the bootstrap router (BSR) for the local PIMv6 region.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.2
hpicfPim6ComponentBSRAddress
The IPv6 address of the bootstrap router (BSR) for the local PIMv6 region.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.3
hpicfPim6ComponentBSRExpiryTime
The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message…
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.4
hpicfPim6ComponentCRPHoldTime
The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.
columnseconds Integer32.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.5
hpicfPim6ComponentStatus
The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.6
hpicfPim6ComponentCBSRAdmStatus
This objects specifies whether or not the router configured to be a Candidate BSR for the local PIMv6 region. Default is disabled.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.7
hpicfPim6ComponentCBSRAddrType
The IPv6 address type of the Candidate BSR router will advertise for the local PIMv6 region.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.8
hpicfPim6ComponentCBSRAddress
The IPv6 address the Candidate BSR router will advertise for the local PIMv6 region.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14.1.9