hm2WwanLtePersistence

HM2-WWAN-MIB · .1.3.6.1.4.1.248.11.125.1.1.4
MIB view Table view

Object

scalar r/w HM2-TC-MIBHmEnabledStatus 
When an LTE capable device is connected to a non-LTE network
it may not handover to an LTE network when one becomes available
if data is being continuously transmitted or received. Enabling
this function will insure that a connection over LTE will be
maintained whenever LTE is available.

Context

MIB
HM2-WWAN-MIB
OID
.1.3.6.1.4.1.248.11.125.1.1.4
Type
scalar
Access
readwrite
Status
current
Parent
hm2WwanGeneralGroup
Siblings
12

Syntax

HM2-TC-MIBHmEnabledStatus
Source
HM2-TC-MIBHmEnabledStatus
Base type
Enumeration

Values & Constraints

Type Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2WwanAdminStatus
WWAN Global mode operation change.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.1
hm2WwanBackupSimFailoverDataLimit
Switch to Backup SIM card when data limit is reached and switch to Primary SIM when data limit is recovered.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.10
hm2WwanModemResetFailoverRegistration
Attempt a Modem reset if both Primary and Backup SIM cards report registration failures. Backup SIM card registration failure might not be needed depending if hm2WwanBackupSimFai…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.11
hm2WwanBackupSimTechnologyLevel
Switch to Backup SIM card when current cellular technology drops bellow a limit. Configure limit with hm2WwanFailoverTechnologyLevel.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.12
hm2WwanFailoverCycle
By default hm2WwanBackupSimFailoverConnection hm2WwanBackupSimFailoverRegistration will not fallback to using the Primary SIM card if failure is encountered on the Backup SIM ca…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.13
hm2WwanSetTrap
A bitmap string serving as a enable/disable method for the trap events defined by the WWAN notifications. All traps are enabled by default.
scalarHm2TrapBits.1.3.6.1.4.1.248.11.125.1.1.14
hm2WwanCellularSelection
Cellular network selection supported combinations. 'auto' value means all supported networks (GSM/UMTS/LTE).
scalarHm2CellularNetworks.1.3.6.1.4.1.248.11.125.1.1.2
hm2WwanLtePersistenceInterval
The number of seconds after which LTE Persistence switch will be attempted. A 0 value means switch without waiting. This time interval is needed to avoid intermittent switches.
scalarInteger32.1.3.6.1.4.1.248.11.125.1.1.5
hm2WwanFailoverTechnologyLevel
Desired cellular technology limit. If the current cellular network technology falls below this level then failover can be triggered. This mib node is meant to be used in conjuncti…
scalarHm2TechnologyLevel.1.3.6.1.4.1.248.11.125.1.1.6
hm2WwanBackupSimFailoverConnection
Switch to Backup SIM card when data connection fails.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.7
hm2WwanBackupSimFailoverRegistration
Switch to Backup SIM when registration fails.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.8
hm2WwanBackupSimFailoverRoaming
Switch to Backup SIM when roaming is detected.
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.1.9