hm2WwanCellularSelection
HM2-WWAN-MIB ·
.1.3.6.1.4.1.248.11.125.1.1.2
Object
scalar
r/w
Hm2CellularNetworks
Cellular network selection supported combinations. 'auto' value means all supported networks (GSM/UMTS/LTE).
Context
- MIB
- HM2-WWAN-MIB
- OID
.1.3.6.1.4.1.248.11.125.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hm2WwanGeneralGroup
- Siblings
- 12
Syntax
Hm2CellularNetworks
- Source
- Hm2CellularNetworks
- Base type
Enumeration
Values & Constraints
Type Values
1 | auto |
2 | gsm |
3 | umts |
4 | lte |
5 | gsmumts |
6 | gsmlte |
7 | umtslte |
8 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2WwanAdminStatus WWAN Global mode operation change. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.1 |
| hm2WwanBackupSimFailoverDataLimit Switch to Backup SIM card when data limit is reached and
switch to Primary SIM when data limit is recovered. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.10 |
| hm2WwanModemResetFailoverRegistration Attempt a Modem reset if both Primary and Backup SIM cards
report registration failures. Backup SIM card registration
failure might not be needed depending if
hm2WwanBackupSimFai… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.11 |
| hm2WwanBackupSimTechnologyLevel Switch to Backup SIM card when current cellular technology
drops bellow a limit. Configure limit with hm2WwanFailoverTechnologyLevel. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.12 |
| hm2WwanFailoverCycle By default
hm2WwanBackupSimFailoverConnection
hm2WwanBackupSimFailoverRegistration
will not fallback to using the Primary SIM card if failure
is encountered on the Backup SIM ca… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.13 |
| hm2WwanSetTrap A bitmap string serving as a enable/disable method for
the trap events defined by the WWAN notifications. All
traps are enabled by default. | scalar | Hm2TrapBits | .1.3.6.1.4.1.248.11.125.1.1.14 |
| hm2WwanLtePersistence When an LTE capable device is connected to a non-LTE network
it may not handover to an LTE network when one becomes available
if data is being continuously transmitted or received… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.4 |
| hm2WwanLtePersistenceInterval The number of seconds after which LTE Persistence switch will be
attempted. A 0 value means switch without waiting. This time
interval is needed to avoid intermittent switches. | scalar | Integer32 | .1.3.6.1.4.1.248.11.125.1.1.5 |
| hm2WwanFailoverTechnologyLevel Desired cellular technology limit. If the current cellular
network technology falls below this level then failover can
be triggered. This mib node is meant to be used in conjuncti… | scalar | Hm2TechnologyLevel | .1.3.6.1.4.1.248.11.125.1.1.6 |
| hm2WwanBackupSimFailoverConnection Switch to Backup SIM card when data connection fails. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.7 |
| hm2WwanBackupSimFailoverRegistration Switch to Backup SIM when registration fails. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.8 |
| hm2WwanBackupSimFailoverRoaming Switch to Backup SIM when roaming is detected. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.1.9 |