hm2WwanCellularLac

HM2-WWAN-MIB · .1.3.6.1.4.1.248.11.125.1.4.1.7
MIB view Table view

Object

scalar SNMPv2-SMIInteger32 
Location area code together with PLMN (MCC + MNC) 
creates an internationally unique identifier known 
as Location Area Identity (LAI). The LAI is used 
for location updating of the mobile subscribers.

Context

MIB
HM2-WWAN-MIB
OID
.1.3.6.1.4.1.248.11.125.1.4.1.7
Type
scalar
Access
readonly
Status
current
Parent
hm2WwanCellularInformationGroup
Siblings
21

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2WwanCellularActiveSimId
The Sim Card id for the current active SIM: * '0' value means no SIM Card is active. * '1' value means Primary SIM Card is active. * '2' value means Backup SIM Card is active.
scalarHm2SimCardsListActive.1.3.6.1.4.1.248.11.125.1.4.1.1
hm2WwanCellularBand
The current Cellular Band used for radio transmissions.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.10
hm2WwanCellularChannel
The current channel number within the Cellular Band used for radio transmissions. A value of 0 means the channel is not relevant to the network technology currently in use.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.11
hm2WwanCellularSignalStrength
In GSM/UMTS mobile networks signal strength is based on RSSI (Received Signal Strength Indication) value measuring the power level being received by the antena. The higher the R…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.12
hm2WwanCellularSignalStrengthLte
In LTE mobile networks signal strength is based on RSRP (Reference Signal Received Power) value.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.13
hm2WwanCellularSignalQuality
UMTS signal quality indicator based on ECIO (Energy to Interference Ratio).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.14
hm2WwanCellularSignalQualityLte
LTE signal quality indicator based on RSRQ (Reference Signal Received Quality).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.15
hm2WwanCellularRoamingStatus
Current Roaming status: * Home: registration done in home network. * Roaming: registration done in partner network in roaming mode. Roaming has to be admin enabled. * …
scalarHm2RoamingStatus.1.3.6.1.4.1.248.11.125.1.4.1.16
hm2WwanCellularBitErrorRate
Cellular transmission error rate displayed in hundredths of percentage units. A value of 1000 means 10% bit error ratio.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.17
hm2WwanCellularCurrentTxRate
Current channel TX rate displayed in kbps.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.4.1.18
hm2WwanCellularCurrentRxRate
Current channel RX rate displayed in kbps.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.4.1.19
hm2WwanCellularRegistration
The current status of the Sim's Carrier Registration.
scalarHm2RegistrationStatus.1.3.6.1.4.1.248.11.125.1.4.1.2
hm2WwanCellularMaxTxRate
Maximum channel TX rate that can be achieved, displayed in kbps.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.4.1.20
hm2WwanCellularMaxRxRate
Maximum channel RX rate that can be achieved, displayed in kbps.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.4.1.21
hm2WwanCellularDataTech
Data technology in use for the active data connection.
scalarHm2CellularDataTech.1.3.6.1.4.1.248.11.125.1.4.1.22
hm2WwanCellularOperator
Network Operator Name
scalarOctetString.1.3.6.1.4.1.248.11.125.1.4.1.3
hm2WwanCellularNetwork
Current Cellular Network Technology being used.
scalarHm2CellularNetworks.1.3.6.1.4.1.248.11.125.1.4.1.4
hm2WwanCellularMcc
Mobile Country Code is a 3 digits code used to identify the country where the Public Land Mobile Network (PLMN) resides.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.5
hm2WwanCellularMnc
Mobile Network Code is a 2 to 3 digits code used to identify the Public Land Mobile Network (PLMN) in that country.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.6
hm2WwanCellularBsic
Base Station Identity Code is a code used in WWAN networks to uniquely identify a base station.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.8
hm2WwanCellularCellId
The identifier of the current used WWAN Cell.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.125.1.4.1.9