hm2WwanCellularBsic
HM2-WWAN-MIB ·
.1.3.6.1.4.1.248.11.125.1.4.1.8
Object
scalar
SNMPv2-SMIInteger32
Base Station Identity Code is a code used in WWAN networks to uniquely identify a base station.
Context
- MIB
- HM2-WWAN-MIB
- OID
.1.3.6.1.4.1.248.11.125.1.4.1.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hm2WwanCellularInformationGroup
- Siblings
- 21
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2WwanCellularActiveSimId The Sim Card id for the current active SIM:
* '0' value means no SIM Card is active.
* '1' value means Primary SIM Card is active.
* '2' value means Backup SIM Card is active. | scalar | Hm2SimCardsListActive | .1.3.6.1.4.1.248.11.125.1.4.1.1 |
| hm2WwanCellularBand The current Cellular Band used for radio transmissions. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.10 |
| hm2WwanCellularChannel The current channel number within the Cellular Band
used for radio transmissions. A value of 0 means the
channel is not relevant to the network technology
currently in use. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.11 |
| hm2WwanCellularSignalStrength In GSM/UMTS mobile networks signal strength is based
on RSSI (Received Signal Strength Indication) value
measuring the power level being received by the antena.
The higher the R… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.12 |
| hm2WwanCellularSignalStrengthLte In LTE mobile networks signal strength is based on
RSRP (Reference Signal Received Power) value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.13 |
| hm2WwanCellularSignalQuality UMTS signal quality indicator based on ECIO
(Energy to Interference Ratio). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.14 |
| hm2WwanCellularSignalQualityLte LTE signal quality indicator based on RSRQ
(Reference Signal Received Quality). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.15 |
| hm2WwanCellularRoamingStatus Current Roaming status:
* Home: registration done in home network.
* Roaming: registration done in partner network in
roaming mode. Roaming has to be admin enabled.
* … | scalar | Hm2RoamingStatus | .1.3.6.1.4.1.248.11.125.1.4.1.16 |
| hm2WwanCellularBitErrorRate Cellular transmission error rate displayed in hundredths
of percentage units. A value of 1000 means 10% bit error ratio. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.17 |
| hm2WwanCellularCurrentTxRate Current channel TX rate displayed in kbps. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.125.1.4.1.18 |
| hm2WwanCellularCurrentRxRate Current channel RX rate displayed in kbps. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.125.1.4.1.19 |
| hm2WwanCellularRegistration The current status of the Sim's Carrier Registration. | scalar | Hm2RegistrationStatus | .1.3.6.1.4.1.248.11.125.1.4.1.2 |
| hm2WwanCellularMaxTxRate Maximum channel TX rate that can be achieved,
displayed in kbps. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.125.1.4.1.20 |
| hm2WwanCellularMaxRxRate Maximum channel RX rate that can be achieved,
displayed in kbps. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.125.1.4.1.21 |
| hm2WwanCellularDataTech Data technology in use for the active
data connection. | scalar | Hm2CellularDataTech | .1.3.6.1.4.1.248.11.125.1.4.1.22 |
| hm2WwanCellularOperator Network Operator Name | scalar | OctetString | .1.3.6.1.4.1.248.11.125.1.4.1.3 |
| hm2WwanCellularNetwork Current Cellular Network Technology being used. | scalar | Hm2CellularNetworks | .1.3.6.1.4.1.248.11.125.1.4.1.4 |
| hm2WwanCellularMcc Mobile Country Code is a 3 digits code used to
identify the country where the Public Land
Mobile Network (PLMN) resides. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.5 |
| hm2WwanCellularMnc Mobile Network Code is a 2 to 3 digits code used to
identify the Public Land Mobile Network (PLMN)
in that country. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.6 |
| hm2WwanCellularLac Location area code together with PLMN (MCC + MNC)
creates an internationally unique identifier known
as Location Area Identity (LAI). The LAI is used
for location updating of t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.7 |
| hm2WwanCellularCellId The identifier of the current used WWAN Cell. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.4.1.9 |