hm2AgentRoutingPingReceiveTimeInvalid
HM2-PLATFORM-ROUTING-MIB ·
.1.3.6.1.4.1.248.12.2.280.60
Object
node
Indicates that the tracking configuration entry contains invalid characters or is out of range for ping replies to receive time that cannot be processed. The allowed range is 1..10.
Context
- MIB
- HM2-PLATFORM-ROUTING-MIB
- OID
.1.3.6.1.4.1.248.12.2.280.60- Type
- node
- Status
- current
- Parent
- hm2AgentRoutingSNMPExtensionGroup
- Siblings
- 72
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentIpHelperTableFullErrorReturn The maximum number of IP helper entries has been reached | node | - | .1.3.6.1.4.1.248.12.2.280.1 |
| hm2AgentStaticNeighbourTableFullErrorReturn Static Neighbour Table is full. | node | - | .1.3.6.1.4.1.248.12.2.280.10 |
| hm2AgentSecondaryAddrNoPrimaryErrorReturn Cannot add the secondary IP address because the interface has no primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.11 |
| hm2AgentSecondaryAddrDifferentPrimaryErrorReturn The secondary IP address must be different from the primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.12 |
| hm2AgentSecondaryAddrWrongIpClassErrorReturn The network number of the secondary IP address is not valid to be used on a routing interface. | node | - | .1.3.6.1.4.1.248.12.2.280.13 |
| hm2AgentSecondaryAddrWrongSubnetErrorReturn obsolete All IP addresses on the interface must be from different subnets. | node | - | .1.3.6.1.4.1.248.12.2.280.14 |
| hm2AgentSecondaryAddrMaxIntfEntriesErrorReturn The maximum number of secondary IP addresses on the interface has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.15 |
| hm2AgentSecondaryAddrMaxSystemEntriesErrorReturn The maximum number of IP addresses on the system has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.16 |
| hm2AgentSecondaryAddrStaticRouteErrorReturn The secondary IP address is same as the next hop address of a static route. | node | - | .1.3.6.1.4.1.248.12.2.280.17 |
| hm2AgentSecondaryAddrStaticARPErrorReturn The secondary IP address is same as a static ARP entry. | node | - | .1.3.6.1.4.1.248.12.2.280.18 |
| hm2AgentSecondaryAddrAbsentEntryErrorReturn The secondary IP address is not configured on the interface. | node | - | .1.3.6.1.4.1.248.12.2.280.19 |
| hm2AgentIpHelperInvalidServerAddrErrorReturn Invalid IP server address. | node | - | .1.3.6.1.4.1.248.12.2.280.2 |
| hm2AgentPrimaryAddrWrongIpClassErrorReturn The primary IP address is out of the allowed IP class. | node | - | .1.3.6.1.4.1.248.12.2.280.20 |
| hm2AgentPrimaryAddrConflictErrorReturn obsolete The primary IP address conflicts with another IP address on a routing interface. | node | - | .1.3.6.1.4.1.248.12.2.280.21 |
| hm2AgentPrimaryAddrStaticRouteErrorReturn The primary IP address is same as the next hop address of a static route. | node | - | .1.3.6.1.4.1.248.12.2.280.22 |
| hm2AgentPrimaryAddrStaticARPErrorReturn The primary IP address is same as a static ARP entry. | node | - | .1.3.6.1.4.1.248.12.2.280.23 |
| hm2AgentPrimaryAddrExistingSecondaryErrorReturn The primary IP address cannot be changed because the interface has secondary IP addresses configured. | node | - | .1.3.6.1.4.1.248.12.2.280.24 |
| hm2AgentPrimaryAddrNetworkConflictErrorReturn obsolete The primary IP address conflicts with the management IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.25 |
| hm2AgentPrimaryAddrRoutingTableFullErrorReturn The primary IP address cannot be added because there are no free entries in the routing table. | node | - | .1.3.6.1.4.1.248.12.2.280.26 |
| hm2AgentDstAddrHostBitSetErrorReturn The route cannot be added. Host bits must not be set in the destination. Network address is {0}. | node | - | .1.3.6.1.4.1.248.12.2.280.27 |
| hm2AgentSamePrefRouteErrorReturn Route cannot be added because reject route and next hop route cannot share the same preference. | node | - | .1.3.6.1.4.1.248.12.2.280.28 |
| hm2AgentVrrpAssoIpAddrRowStatusInconsistentAddress The virtual address does not matching the current interface address configuration. | node | - | .1.3.6.1.4.1.248.12.2.280.29 |
| hm2AgentRouterOspfDependenciesNotMet Cannot modify OSPF admin state on this interface. Set primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.3 |
| hm2AgentVrrpAssoIpAddrRowStatusInvalidAddress The virtual address is not valid with the current interface address configuration. | node | - | .1.3.6.1.4.1.248.12.2.280.30 |
| hm2AgentVrrpAssoIpAddrRowStatusUnknownVRID Unknown virtual router id. | node | - | .1.3.6.1.4.1.248.12.2.280.31 |
| hm2AgentSwitchIpRouterDiscMinMaxAdvtIntErrorRtrn Min advertisement interval is bigger then max advertisement interval. | node | - | .1.3.6.1.4.1.248.12.2.280.32 |
| hm2AgentSwitchIpRouterDiscLifeTimeMaxAdvIntErrorRtrn Max advertisement interval is bigger then advertisement life time. | node | - | .1.3.6.1.4.1.248.12.2.280.33 |
| hm2AgentSwitchIpIcmpRateLimitExceedingRatioErrorReturn Rate limit ratio exceeds 100 packets per second. | node | - | .1.3.6.1.4.1.248.12.2.280.34 |
| hm2AgentRouterOspfMaxAreaErrorReturn The maximum number of OSPF areas has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.35 |
| hm2AgentospfRouterIdChange OSPF must be disabled to change the router ID. | node | - | .1.3.6.1.4.1.248.12.2.280.36 |
| hm2AgentOspfRedistDistList Please add a redistribute list. | node | - | .1.3.6.1.4.1.248.12.2.280.37 |
| hm2AgentOspfDefaultAreaDeleteErrorReturn The default area cannot be deleted. | node | - | .1.3.6.1.4.1.248.12.2.280.38 |
| hm2AgentLocalArpDeleteErrorReturn Local ARP entries cannot be deleted. | node | - | .1.3.6.1.4.1.248.12.2.280.39 |
| hm2AgentRouterOspfRangeTableFullErrorReturn The maximum number of area-range entries has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.4 |
| hm2AgentDynamicVlanRoutingErrorReturn Dynamic VLANs cannot be used for routing interfaces. | node | - | .1.3.6.1.4.1.248.12.2.280.40 |
| hm2AgentVlanUnawareRoutingErrorReturn Routing cannot be used together with the vlan unaware mode. | node | - | .1.3.6.1.4.1.248.12.2.280.41 |
| hm2AgentRoutingInvalidNetworkAddress Indicates that the routing table entry contains an invalid value for
network address that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.42 |
| hm2AgentRoutingTypeInvalidValue Indicates that the type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.43 |
| hm2AgentRoutingLocalRoutePreference Indicates that the local type and local protocol should have the preference
value zero. | node | - | .1.3.6.1.4.1.248.12.2.280.44 |
| hm2AgentRoutingMetricInvalid Indicates that the routing table entry contains an invalid value for
metric that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.45 |
| hm2AgentRoutingMetricNotSupported Indicates that the route metric except 1 is not supported and cannot be set. | node | - | .1.3.6.1.4.1.248.12.2.280.46 |
| hm2AgentRoutingNexthopAtLocalInterface Indicates that the entry has Nexthop address that is set on a local interface. | node | - | .1.3.6.1.4.1.248.12.2.280.47 |
| hm2AgentRoutingNexthopInvalid Indicates that the routing table entry contains an invalid value for
next hop IP address that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.48 |
| hm2AgentRoutingMaxEntryCountReached Indicates that the route entry cannot be added as maximum count has reached. | node | - | .1.3.6.1.4.1.248.12.2.280.49 |
| hm2AgentRouterOspfVirtNbrTableFullErrorReturn The maximum number of virtual neighbor entries has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.5 |
| hm2AgentRoutingNoPreferenceUpdate Indicates that the preference value cannot be updated. | node | - | .1.3.6.1.4.1.248.12.2.280.50 |
| hm2AgentRoutingPortInvalid Indicates that the routing table entry contains an invalid value for
port that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.51 |
| hm2AgentRoutingStaticRoutePreference Indicates that the remote type and netmgmt protocol should have the preference
value in range 1..255. | node | - | .1.3.6.1.4.1.248.12.2.280.52 |
| hm2AgentRoutingSameNetworkAddrErrorReturn Indicates that the entry with same network address already exists. | node | - | .1.3.6.1.4.1.248.12.2.280.53 |
| hm2AgentRoutingTypeInvalid Indicates that the routing table entry contains an invalid value for
route type that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.54 |
| hm2AgentRoutingMacAddressInvalid Indicates that the entry contains an invalid value for MAC address that
cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.55 |
| hm2AgentRoutingIPAddressExist Indicates that IP address already exists. | node | - | .1.3.6.1.4.1.248.12.2.280.56 |
| hm2AgentRoutingPingPortInvalid Indicates that the ping port contains an invalid value
that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.57 |
| hm2AgentRoutingIntervalTimeInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping interval time that cannot
be processed. The allowed range is 100..20000. | node | - | .1.3.6.1.4.1.248.12.2.280.58 |
| hm2AgentRoutingPingLoseTimeInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping replies to lose time
that cannot be processed. The allowed range is 1..10. | node | - | .1.3.6.1.4.1.248.12.2.280.59 |
| hm2AgentRoutingPingTimeoutInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping timeout that cannot be
processed. The allowed range is 10..10000. | node | - | .1.3.6.1.4.1.248.12.2.280.61 |
| hm2AgentRoutingPingTTLInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping TTL that cannot be
processed. The allowed range is 1..125. | node | - | .1.3.6.1.4.1.248.12.2.280.62 |
| hm2AgentRoutingLogicalOperandInvalid Indicates that the tracking configuration entry contains an
invalid value for logical operand A|B that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.63 |
| hm2AgentRoutingOperatorInvalid Indicates that the tracking configuration entry contains an invalid
value for operator that cannot be processed. Possible values
'and' and 'or'. | node | - | .1.3.6.1.4.1.248.12.2.280.64 |
| hm2AgentRoutingLinkDelayInvalid Indicates that the tracking configuration entry contains an invalid
value for link up/down delay which is out of range and cannot be
processed. The allowed range is 0..255. | node | - | .1.3.6.1.4.1.248.12.2.280.65 |
| hm2AgentRoutingL3RelayFunctionInvalid Indicates that the L3 relay function contains an invalid value
that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.66 |
| hm2AgentRoutingBootpDhcpHopsInvalid Indicates that L3 configuration entry contains invalid characters
or is out of range for bootp/dhcp hops (max.) that cannot be
processed. The allowed range is 1..16. | node | - | .1.3.6.1.4.1.248.12.2.280.67 |
| hm2AgentRoutingBootpDhcpWaitTimeInvalid Indicates that L3 configuration entry contains invalid characters
or is out of range for bootp/dhcp wait time (min.) that cannot be
processed. The allowed range is 0..100. | node | - | .1.3.6.1.4.1.248.12.2.280.68 |
| hm2AgentRoutingCircuitIDInvalid Indicates that the tracking configuration entry contains
an invalid value for circuit ID that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.69 |
| hm2AgentRoutingTrackTypeEnableError Indicates that the process of enabling tracking instance {0} has
failed because track type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.70 |
| hm2AgentRoutingTrackingEnableErrorReturn Indicates that the process of enabling tracking instance {0}
admin state has failed. | node | - | .1.3.6.1.4.1.248.12.2.280.71 |
| hm2AgentRoutingTrackingDisableErrorReturn Indicates that the process of disabling tracking instance {0}
admin state has failed. | node | - | .1.3.6.1.4.1.248.12.2.280.72 |
| hm2AgentRoutingTrackTypeDisableError Indicates that the process of disabling tracking instance {0} has
failed because track type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.73 |
| hm2AgentRoutingTrackIDCreateError Indicates that the creation of tracking instance {0} has failed
because track ID is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.74 |
| hm2AgentRoutingTrackTypeCreateError Indicates that the creation of tracking instance {0} has failed
because track type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.75 |
| hm2AgentRouterRIPDependenciesNotMet Cannot modify RIP admin state on this interface. Set primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.8 |
| hm2AgentIpHelperInvalidUdpPortErrorReturn Invalid UDP port. | node | - | .1.3.6.1.4.1.248.12.2.280.9 |