hm2AgentRoutingLinkDelayInvalid
HM2-PLATFORM-ROUTING-MIB ·
.1.3.6.1.4.1.248.12.2.280.65
Object
node
Indicates that the tracking configuration entry contains an invalid value for link up/down delay which is out of range and cannot be processed. The allowed range is 0..255.
Context
- MIB
- HM2-PLATFORM-ROUTING-MIB
- OID
.1.3.6.1.4.1.248.12.2.280.65- Type
- node
- Status
- current
- Parent
- hm2AgentRoutingSNMPExtensionGroup
- Siblings
- 72
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentIpHelperTableFullErrorReturn The maximum number of IP helper entries has been reached | node | - | .1.3.6.1.4.1.248.12.2.280.1 |
| hm2AgentStaticNeighbourTableFullErrorReturn Static Neighbour Table is full. | node | - | .1.3.6.1.4.1.248.12.2.280.10 |
| hm2AgentSecondaryAddrNoPrimaryErrorReturn Cannot add the secondary IP address because the interface has no primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.11 |
| hm2AgentSecondaryAddrDifferentPrimaryErrorReturn The secondary IP address must be different from the primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.12 |
| hm2AgentSecondaryAddrWrongIpClassErrorReturn The network number of the secondary IP address is not valid to be used on a routing interface. | node | - | .1.3.6.1.4.1.248.12.2.280.13 |
| hm2AgentSecondaryAddrWrongSubnetErrorReturn obsolete All IP addresses on the interface must be from different subnets. | node | - | .1.3.6.1.4.1.248.12.2.280.14 |
| hm2AgentSecondaryAddrMaxIntfEntriesErrorReturn The maximum number of secondary IP addresses on the interface has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.15 |
| hm2AgentSecondaryAddrMaxSystemEntriesErrorReturn The maximum number of IP addresses on the system has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.16 |
| hm2AgentSecondaryAddrStaticRouteErrorReturn The secondary IP address is same as the next hop address of a static route. | node | - | .1.3.6.1.4.1.248.12.2.280.17 |
| hm2AgentSecondaryAddrStaticARPErrorReturn The secondary IP address is same as a static ARP entry. | node | - | .1.3.6.1.4.1.248.12.2.280.18 |
| hm2AgentSecondaryAddrAbsentEntryErrorReturn The secondary IP address is not configured on the interface. | node | - | .1.3.6.1.4.1.248.12.2.280.19 |
| hm2AgentIpHelperInvalidServerAddrErrorReturn Invalid IP server address. | node | - | .1.3.6.1.4.1.248.12.2.280.2 |
| hm2AgentPrimaryAddrWrongIpClassErrorReturn The primary IP address is out of the allowed IP class. | node | - | .1.3.6.1.4.1.248.12.2.280.20 |
| hm2AgentPrimaryAddrConflictErrorReturn obsolete The primary IP address conflicts with another IP address on a routing interface. | node | - | .1.3.6.1.4.1.248.12.2.280.21 |
| hm2AgentPrimaryAddrStaticRouteErrorReturn The primary IP address is same as the next hop address of a static route. | node | - | .1.3.6.1.4.1.248.12.2.280.22 |
| hm2AgentPrimaryAddrStaticARPErrorReturn The primary IP address is same as a static ARP entry. | node | - | .1.3.6.1.4.1.248.12.2.280.23 |
| hm2AgentPrimaryAddrExistingSecondaryErrorReturn The primary IP address cannot be changed because the interface has secondary IP addresses configured. | node | - | .1.3.6.1.4.1.248.12.2.280.24 |
| hm2AgentPrimaryAddrNetworkConflictErrorReturn obsolete The primary IP address conflicts with the management IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.25 |
| hm2AgentPrimaryAddrRoutingTableFullErrorReturn The primary IP address cannot be added because there are no free entries in the routing table. | node | - | .1.3.6.1.4.1.248.12.2.280.26 |
| hm2AgentDstAddrHostBitSetErrorReturn The route cannot be added. Host bits must not be set in the destination. Network address is {0}. | node | - | .1.3.6.1.4.1.248.12.2.280.27 |
| hm2AgentSamePrefRouteErrorReturn Route cannot be added because reject route and next hop route cannot share the same preference. | node | - | .1.3.6.1.4.1.248.12.2.280.28 |
| hm2AgentVrrpAssoIpAddrRowStatusInconsistentAddress The virtual address does not matching the current interface address configuration. | node | - | .1.3.6.1.4.1.248.12.2.280.29 |
| hm2AgentRouterOspfDependenciesNotMet Cannot modify OSPF admin state on this interface. Set primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.3 |
| hm2AgentVrrpAssoIpAddrRowStatusInvalidAddress The virtual address is not valid with the current interface address configuration. | node | - | .1.3.6.1.4.1.248.12.2.280.30 |
| hm2AgentVrrpAssoIpAddrRowStatusUnknownVRID Unknown virtual router id. | node | - | .1.3.6.1.4.1.248.12.2.280.31 |
| hm2AgentSwitchIpRouterDiscMinMaxAdvtIntErrorRtrn Min advertisement interval is bigger then max advertisement interval. | node | - | .1.3.6.1.4.1.248.12.2.280.32 |
| hm2AgentSwitchIpRouterDiscLifeTimeMaxAdvIntErrorRtrn Max advertisement interval is bigger then advertisement life time. | node | - | .1.3.6.1.4.1.248.12.2.280.33 |
| hm2AgentSwitchIpIcmpRateLimitExceedingRatioErrorReturn Rate limit ratio exceeds 100 packets per second. | node | - | .1.3.6.1.4.1.248.12.2.280.34 |
| hm2AgentRouterOspfMaxAreaErrorReturn The maximum number of OSPF areas has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.35 |
| hm2AgentospfRouterIdChange OSPF must be disabled to change the router ID. | node | - | .1.3.6.1.4.1.248.12.2.280.36 |
| hm2AgentOspfRedistDistList Please add a redistribute list. | node | - | .1.3.6.1.4.1.248.12.2.280.37 |
| hm2AgentOspfDefaultAreaDeleteErrorReturn The default area cannot be deleted. | node | - | .1.3.6.1.4.1.248.12.2.280.38 |
| hm2AgentLocalArpDeleteErrorReturn Local ARP entries cannot be deleted. | node | - | .1.3.6.1.4.1.248.12.2.280.39 |
| hm2AgentRouterOspfRangeTableFullErrorReturn The maximum number of area-range entries has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.4 |
| hm2AgentDynamicVlanRoutingErrorReturn Dynamic VLANs cannot be used for routing interfaces. | node | - | .1.3.6.1.4.1.248.12.2.280.40 |
| hm2AgentVlanUnawareRoutingErrorReturn Routing cannot be used together with the vlan unaware mode. | node | - | .1.3.6.1.4.1.248.12.2.280.41 |
| hm2AgentRoutingInvalidNetworkAddress Indicates that the routing table entry contains an invalid value for
network address that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.42 |
| hm2AgentRoutingTypeInvalidValue Indicates that the type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.43 |
| hm2AgentRoutingLocalRoutePreference Indicates that the local type and local protocol should have the preference
value zero. | node | - | .1.3.6.1.4.1.248.12.2.280.44 |
| hm2AgentRoutingMetricInvalid Indicates that the routing table entry contains an invalid value for
metric that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.45 |
| hm2AgentRoutingMetricNotSupported Indicates that the route metric except 1 is not supported and cannot be set. | node | - | .1.3.6.1.4.1.248.12.2.280.46 |
| hm2AgentRoutingNexthopAtLocalInterface Indicates that the entry has Nexthop address that is set on a local interface. | node | - | .1.3.6.1.4.1.248.12.2.280.47 |
| hm2AgentRoutingNexthopInvalid Indicates that the routing table entry contains an invalid value for
next hop IP address that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.48 |
| hm2AgentRoutingMaxEntryCountReached Indicates that the route entry cannot be added as maximum count has reached. | node | - | .1.3.6.1.4.1.248.12.2.280.49 |
| hm2AgentRouterOspfVirtNbrTableFullErrorReturn The maximum number of virtual neighbor entries has been reached. | node | - | .1.3.6.1.4.1.248.12.2.280.5 |
| hm2AgentRoutingNoPreferenceUpdate Indicates that the preference value cannot be updated. | node | - | .1.3.6.1.4.1.248.12.2.280.50 |
| hm2AgentRoutingPortInvalid Indicates that the routing table entry contains an invalid value for
port that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.51 |
| hm2AgentRoutingStaticRoutePreference Indicates that the remote type and netmgmt protocol should have the preference
value in range 1..255. | node | - | .1.3.6.1.4.1.248.12.2.280.52 |
| hm2AgentRoutingSameNetworkAddrErrorReturn Indicates that the entry with same network address already exists. | node | - | .1.3.6.1.4.1.248.12.2.280.53 |
| hm2AgentRoutingTypeInvalid Indicates that the routing table entry contains an invalid value for
route type that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.54 |
| hm2AgentRoutingMacAddressInvalid Indicates that the entry contains an invalid value for MAC address that
cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.55 |
| hm2AgentRoutingIPAddressExist Indicates that IP address already exists. | node | - | .1.3.6.1.4.1.248.12.2.280.56 |
| hm2AgentRoutingPingPortInvalid Indicates that the ping port contains an invalid value
that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.57 |
| hm2AgentRoutingIntervalTimeInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping interval time that cannot
be processed. The allowed range is 100..20000. | node | - | .1.3.6.1.4.1.248.12.2.280.58 |
| hm2AgentRoutingPingLoseTimeInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping replies to lose time
that cannot be processed. The allowed range is 1..10. | node | - | .1.3.6.1.4.1.248.12.2.280.59 |
| hm2AgentRoutingPingReceiveTimeInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping replies to receive time
that cannot be processed. The allowed range is 1..1… | node | - | .1.3.6.1.4.1.248.12.2.280.60 |
| hm2AgentRoutingPingTimeoutInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping timeout that cannot be
processed. The allowed range is 10..10000. | node | - | .1.3.6.1.4.1.248.12.2.280.61 |
| hm2AgentRoutingPingTTLInvalid Indicates that the tracking configuration entry contains invalid
characters or is out of range for ping TTL that cannot be
processed. The allowed range is 1..125. | node | - | .1.3.6.1.4.1.248.12.2.280.62 |
| hm2AgentRoutingLogicalOperandInvalid Indicates that the tracking configuration entry contains an
invalid value for logical operand A|B that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.63 |
| hm2AgentRoutingOperatorInvalid Indicates that the tracking configuration entry contains an invalid
value for operator that cannot be processed. Possible values
'and' and 'or'. | node | - | .1.3.6.1.4.1.248.12.2.280.64 |
| hm2AgentRoutingL3RelayFunctionInvalid Indicates that the L3 relay function contains an invalid value
that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.66 |
| hm2AgentRoutingBootpDhcpHopsInvalid Indicates that L3 configuration entry contains invalid characters
or is out of range for bootp/dhcp hops (max.) that cannot be
processed. The allowed range is 1..16. | node | - | .1.3.6.1.4.1.248.12.2.280.67 |
| hm2AgentRoutingBootpDhcpWaitTimeInvalid Indicates that L3 configuration entry contains invalid characters
or is out of range for bootp/dhcp wait time (min.) that cannot be
processed. The allowed range is 0..100. | node | - | .1.3.6.1.4.1.248.12.2.280.68 |
| hm2AgentRoutingCircuitIDInvalid Indicates that the tracking configuration entry contains
an invalid value for circuit ID that cannot be processed. | node | - | .1.3.6.1.4.1.248.12.2.280.69 |
| hm2AgentRoutingTrackTypeEnableError Indicates that the process of enabling tracking instance {0} has
failed because track type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.70 |
| hm2AgentRoutingTrackingEnableErrorReturn Indicates that the process of enabling tracking instance {0}
admin state has failed. | node | - | .1.3.6.1.4.1.248.12.2.280.71 |
| hm2AgentRoutingTrackingDisableErrorReturn Indicates that the process of disabling tracking instance {0}
admin state has failed. | node | - | .1.3.6.1.4.1.248.12.2.280.72 |
| hm2AgentRoutingTrackTypeDisableError Indicates that the process of disabling tracking instance {0} has
failed because track type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.73 |
| hm2AgentRoutingTrackIDCreateError Indicates that the creation of tracking instance {0} has failed
because track ID is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.74 |
| hm2AgentRoutingTrackTypeCreateError Indicates that the creation of tracking instance {0} has failed
because track type is invalid. | node | - | .1.3.6.1.4.1.248.12.2.280.75 |
| hm2AgentRouterRIPDependenciesNotMet Cannot modify RIP admin state on this interface. Set primary IP address. | node | - | .1.3.6.1.4.1.248.12.2.280.8 |
| hm2AgentIpHelperInvalidUdpPortErrorReturn Invalid UDP port. | node | - | .1.3.6.1.4.1.248.12.2.280.9 |