HM2-PLATFORM-ROUTING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
30
Rows
30
Columns
164

hm2AgentSwitchLocalProxyArpTable

table
.1.3.6.1.4.1.248.12.2.1.11 · 1 row entry · 1 columns
Open in standard view 
This table contains the per-interface configuration
parameters for local proxy ARP.
hm2AgentSwitchLocalProxyArpEntry entry .1.3.6.1.4.1.248.12.2.1.11.1
Represents a logical row in the
hm2AgentSwitchLocalProxyArpTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentSwitchLocalProxyArpMode
The local proxy ARP mode for the interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.1.11.1.1

hm2AgentSwitchIntfArpTable

table
.1.3.6.1.4.1.248.12.2.1.12 · 1 row entry · 6 columns
Open in standard view 
This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.
hm2AgentSwitchIntfArpEntry entry .1.3.6.1.4.1.248.12.2.1.12.1
This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.
Indexes
hm2AgentSwitchIntfArpIpAddress hm2AgentSwitchIntfArpIfIndex
Column Syntax OID
hm2AgentSwitchIntfArpIpAddress
The Type of Address assigned to this interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.1.12.1.1
hm2AgentSwitchIntfArpIfIndex
The Associated IfIndex which identified the ARP Entry.
This value must be specified for static ARP entries on an
unnumbered interface
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.2.1.12.1.2
hm2AgentSwitchIntfArpAge
This defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.1.12.1.3
hm2AgentSwitchIntfArpMacAddress
The hardware MAX Address that each interface maps to.
RFC1213-MIBPhysAddressr/w
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.248.12.2.1.12.1.4
hm2AgentSwitchIntfArpType
The type of ARP entry.
Enumeration
Enumerated Values:
1local
2gateway
3static
4dynamic
 .1.3.6.1.4.1.248.12.2.1.12.1.5
hm2AgentSwitchIntfArpStatus
The status of this ARP entry. Setting this object destroy will remove the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.1.12.1.6

hm2AgentSwitchIpInterfaceTable

table
.1.3.6.1.4.1.248.12.2.2.3 · 1 row entry · 18 columns
Open in standard view 
IP interface table.
hm2AgentSwitchIpInterfaceEntry entry .1.3.6.1.4.1.248.12.2.2.3.1
IP interface entry.
Indexes
hm2AgentSwitchIpInterfaceIfIndex
Column Syntax OID
hm2AgentSwitchIpInterfaceIfIndex
The IfIndex associated with this instance.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.2.2.3.1.1
hm2AgentSwitchIPAddressConfigMethod
The source of the IP address. User can set the object to none(0) or dhcp(2).
Option dhcp(2) enables DHCP client on the interface.
Option none(0) disables DHCP client on the interface.
Get on this object returns manual(1…
Enumerationr/w
Enumerated Values:
0none
1manual
2dhcp
 .1.3.6.1.4.1.248.12.2.2.3.1.2
hm2AgentSwitchIpInterfaceIpAddress
The IP address assigned to this interface. When setting this value,
the value of hm2AgentSwitchIpInterfaceNetMask must be set at the same time.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.2.3.1.3
hm2AgentSwitchIpInterfaceNetMask
The netmask assigned to this interface. When setting this value, the
value of hm2AgentSwitchIpInterfaceIpAddress must be set at the same time.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.2.3.1.4
hm2AgentSwitchIpInterfaceClearIp
When setting this object to 'enable(1)' the interfaces IP address and netmask will
be set back to 0.0.0.0. Reading this object always returns 'disable(2).
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.3.1.5
hm2AgentSwitchIpInterfaceRoutingMode
Enables or disables routing for this interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.3.1.6
hm2AgentSwitchIpInterfaceProxyARPMode
Enables or disables proxy ARP for this interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.3.1.7
hm2AgentSwitchIpInterfaceMtuValue
Configures the MTU value for this interface. The applicable range is
68 to the <interface MTU value - 18>, in bytes. Get of this object
returns the effective MTU value on the interface. Set of this object
with a valu…
Unsigned32r/w
Constraints:
range: 0-0
range: 68-12266
 .1.3.6.1.4.1.248.12.2.2.3.1.8
hm2AgentSwitchIpInterfaceBandwidth
Configures the bandwidth value for this interface. If the returned value is 0,
bandwidth for this interface is not configured.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.248.12.2.2.3.1.9
hm2AgentSwitchIpInterfaceUnnumberedIfIndex
If this object is non-zero, it indicates that the interface is unnumbered
and specifies which interface the address is borrowed from.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.2.2.3.1.10
hm2AgentSwitchIpInterfaceIcmpUnreachables
If this object is enabled, it indicates that ICMP unreachables can be sent on this
interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.3.1.11
hm2AgentSwitchIpInterfaceIcmpRedirects
If this object is enabled and hm2AgentSwitchIpIcmpRedirectsMode is also enabled, ICMP redirects
can be sent on this interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.3.1.12
hm2AgentSwitchDhcpOperation
Renew or release the IP address learned through DHCP.
Get on this object always gives none. None means no operation is performed on DHCP.
Enumerationr/w
Enumerated Values:
1renew
2release
3none
 .1.3.6.1.4.1.248.12.2.2.3.1.13
hm2AgentSwitchIpInterfaceSuppressed
This mib variable contains the following values, which has the meaning as:
'unsuppressed' - The interface is not suppressed
'suppressed' - The interface is suppressed
Enumeration
Enumerated Values:
0unsuppressed
1suppressed
 .1.3.6.1.4.1.248.12.2.2.3.1.14
hm2AgentSwitchIpInterfaceNumberOfFlaps
This mib variable displays the number of flaps occurred on the interface
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.248.12.2.2.3.1.15
hm2AgentSwitchIpInterfaceCurrentPenalty
This mib variable displays the current penalty of an interface
Unsigned32
Constraints:
range: 0-20000
 .1.3.6.1.4.1.248.12.2.2.3.1.16
hm2AgentSwitchIpInterfaceReUseTime
This mib variable displays the number of seconds until the interface is
allowed to come up
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.2.3.1.17
hm2AgentSwitchIpInterfaceNetdirectedBCMode
Enables or disables netdirected broadcasts for this interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.3.1.248

hm2AgentSwitchIpRouterDiscoveryTable

table
.1.3.6.1.4.1.248.12.2.2.4 · 1 row entry · 7 columns
Open in standard view 
There is no global administrative flag for router discovery.  The global
routing flag (hm2AgentSwitchIpRoutingMode) will be used for this purpose.  If routing
is disabled, router discovery is disabled as well.
hm2AgentSwitchIpRouterDiscoveryEntry entry .1.3.6.1.4.1.248.12.2.2.4.1
.
Indexes
hm2AgentSwitchIpRouterDiscoveryIfIndex
Column Syntax OID
hm2AgentSwitchIpRouterDiscoveryIfIndex
Interface Number to configure Router Discovery on.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.2.2.4.1.1
hm2AgentSwitchIpRouterDiscoveryAdvertiseMode
Enable or disable router discovery on the interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.2.4.1.2
hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval
Maximum time allowed between sending router advertisements
from the interface.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.248.12.2.2.4.1.3
hm2AgentSwitchIpRouterDiscoveryMinAdvertisementInterval
Minimum time allowed between sending router advertisements from the interface.

This value must be less than or equal to
hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.248.12.2.2.4.1.4
hm2AgentSwitchIpRouterDiscoveryAdvertisementLifetime
Value of lifetime field of router advertsisement sent from
the interface.

This value must be greater than or equal to
hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.248.12.2.2.4.1.5
hm2AgentSwitchIpRouterDiscoveryPreferenceLevel
Preferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.2.4.1.6
hm2AgentSwitchIpRouterDiscoveryAdvertisementAddress
Address used when sending router advertisements from the interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.2.4.1.7

hm2AgentSwitchIpVlanTable

table
.1.3.6.1.4.1.248.12.2.2.5 · 1 row entry · 3 columns
Open in standard view 
A static VLAN for which routing can be enabled/disabled.
hm2AgentSwitchIpVlanEntry entry .1.3.6.1.4.1.248.12.2.2.5.1
A static VLAN for which routing can be enabled/disabled.
Indexes
hm2AgentSwitchIpVlanId
Column Syntax OID
hm2AgentSwitchIpVlanId
The VLAN's ID.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.248.12.2.2.5.1.1
hm2AgentSwitchIpVlanIfIndex
The IfIndex associated with this VLAN.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.2.2.5.1.2
hm2AgentSwitchIpVlanRoutingStatus
Status of Routing mode per VLAN.
active(1) - VLAN is enabled for routing
createAndGo(4) - Adds VLAN entry for routing
createAndWait(5) - Adds VLAN entry for routing
destroy(6) - Removes VLAN from routing
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.2.5.1.3

hm2AgentSwitchSecondaryAddressTable

table
.1.3.6.1.4.1.248.12.2.2.6 · 1 row entry · 3 columns
Open in standard view 
Contains a list of secondary IP addresses associated with an interface.
hm2AgentSwitchSecondaryAddressEntry entry .1.3.6.1.4.1.248.12.2.2.6.1
A secondary IP address for a given interface. This IP address must not
conflict with the IP address configured in the hm2AgentSwitchIpInterfaceTable.
Indexes
hm2AgentSwitchIpInterfaceIfIndex hm2AgentSwitchSecondaryIpAddress
Column Syntax OID
hm2AgentSwitchSecondaryIpAddress
The secondary IP address assigned to this interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.2.6.1.1
hm2AgentSwitchSecondaryNetMask
The secondary netmask assigned to this interface. This value must be
set during creation and can not be changed.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.2.6.1.2
hm2AgentSwitchSecondaryStatus
Creates a new entry in the secondary address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The hm2AgentSwitchSecondaryNetMask
objec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.2.6.1.3

hm2AgentSwitchIntfIpHelperAddressTable

table
.1.3.6.1.4.1.248.12.2.2.10 · 1 row entry · 4 columns
Open in standard view 
Contains a list of IP helper addresses associated with an interface.
hm2AgentSwitchIntfIpHelperAddressEntry entry .1.3.6.1.4.1.248.12.2.2.10.1
An IP helper address for a given interface.
Indexes
hm2AgentSwitchIpInterfaceIfIndex hm2AgentSwitchIntfIpHelperUdpPort hm2AgentSwitchIntfIpHelperIpAddress
Column Syntax OID
hm2AgentSwitchIntfIpHelperUdpPort
UDP port number. Received packets with this destination UDP port
number are forwarded to the helper address in this entry.
A relay entry with port 0 allows dhcp, time, winnameserver, tacacs,
dns, tftp, netbios-ns and ne…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.248.12.2.2.10.1.1
hm2AgentSwitchIntfIpHelperIpAddress
An IP helper address for packets received on this interface.
An address of 0.0.0.0 identifies the entry as a discard entry.
Packets that match a discard entry are dropped.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.2.10.1.2
hm2AgentSwitchIntfIpHelperHitCount
The number of times a packet has been forwarded or discarded according to this entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.2.10.1.4
hm2AgentSwitchIntfIpHelperStatus
Creates a new entry in the Helper Address table.
Allowed values are:

createAndGo(4) - Creates an IP helper entry in this table.

destroy(6) - Removes the IP helper entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.2.10.1.5

hm2AgentRipRouteRedistTable

table
.1.3.6.1.4.1.248.12.2.3.8 · 1 row entry · 11 columns
Open in standard view 
This table contains the MIB objects required to configure 
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected.
hm2AgentRipRouteRedistEntry entry .1.3.6.1.4.1.248.12.2.3.8.1
The entries of the table.
Indexes
hm2AgentRipRouteRedistSource
Column Syntax OID
hm2AgentRipRouteRedistSource
Source route, from which RIP can redistribute routes.
This object also acts as the identifier for the
RIP redistribution Table entry.
Enumeration
Enumerated Values:
1connected
2static
3ospf
4bgp
 .1.3.6.1.4.1.248.12.2.3.8.1.1
hm2AgentRipRouteRedistMode
User enabels/disables route-redistribution for a particular source
protocol.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.3.8.1.2
hm2AgentRipRouteRedistMetric
Metric used for redistributing a particular source protocol route
into RIP. {0} indicates that the parameter is not configured, this value
should not be set. Valid range for set is (1..15).
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.248.12.2.3.8.1.3
hm2AgentRipRouteRedistMetricConfigured
Flag to determine whether RIP redistribute-metric is configured
or not. Set to 'false' to unconfigure redistribute metric. Set to 'true'
is not allowed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.3.8.1.4
hm2AgentRipRouteRedistMatchInternal
If this flag is true, RIP redistributes OSPF internal routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.248.12.2.3.8.1.5
hm2AgentRipRouteRedistMatchExternal1
If this flag is true, RIP redistributes OSPF External1 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.248.12.2.3.8.1.6
hm2AgentRipRouteRedistMatchExternal2
If this flag is true, RIP redistributes OSPF External2 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.248.12.2.3.8.1.7
hm2AgentRipRouteRedistMatchNSSAExternal1
If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.248.12.2.3.8.1.8
hm2AgentRipRouteRedistMatchNSSAExternal2
If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.248.12.2.3.8.1.9
hm2AgentRipRouteRedistDistList
Access-list number of the access-list, which filters routes received
from a source-protocol.
Unsigned32r/w
Constraints:
range: 1000-1099
range: 0-0
 .1.3.6.1.4.1.248.12.2.3.8.1.10
hm2AgentRipRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.3.8.1.11

hm2AgentRip2IfConfTable

table
.1.3.6.1.4.1.248.12.2.3.9 · 1 row entry · 1 columns
Open in standard view 
A list of subnets which require separate
configuration in RIP.  Augments rip2IfConfTable
in the RIPv2-MIB.
hm2AgentRip2IfConfEntry entry .1.3.6.1.4.1.248.12.2.3.9.1
A Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentRip2IfConfAuthKeyId
The identifier for the authentication key used
on this interface. This field is only meaningful
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.3.9.1.1

hm2AgentOspfRouteRedistTable

table
.1.3.6.1.4.1.248.12.2.4.8 · 1 row entry · 9 columns
Open in standard view 
This table contains the MIB objects required to configure 
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected.
hm2AgentOspfRouteRedistEntry entry .1.3.6.1.4.1.248.12.2.4.8.1
The entries of the table.
Indexes
hm2AgentOspfRouteRedistSource
Column Syntax OID
hm2AgentOspfRouteRedistSource
Source protocol, from which OSPF can redistribute routes.
This object also acts as the identifier for the
OSPF redistribution Table entry.
Enumeration
Enumerated Values:
1connected
2static
3rip
4bgp
 .1.3.6.1.4.1.248.12.2.4.8.1.1
hm2AgentOspfRouteRedistMode
User enables/disables route-redistribution for a particular source
protocol.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.4.8.1.2
hm2AgentOspfRouteRedistMetric
Metric used for redistributing a particular source protocol route
into OSPF.
Integer32r/w
Constraints:
range: 0-16777214
 .1.3.6.1.4.1.248.12.2.4.8.1.3
hm2AgentOspfRouteRedistMetricConfigured
Flag to determine whether OSPF redistribute-metric is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.4.8.1.4
hm2AgentOspfRouteRedistMetricType
Metric Type of routes,which OSPF redistributes from other source protocols.
It can be 1(external type 1) or 2(external type 2).
Enumerationr/w
Enumerated Values:
1externalType1
2externalType2
 .1.3.6.1.4.1.248.12.2.4.8.1.5
hm2AgentOspfRouteRedistTag
It specifies the tag field in routes redistributed by OSPF.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.4.8.1.6
hm2AgentOspfRouteRedistSubnets
If this value is false, then OSPF will not redistribute subnetted routes.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.4.8.1.7
hm2AgentOspfRouteRedistDistList
Access-list number of the access-list, which filters routes received
from a source-protocol.
HiOS: Valid access list numbers are between 1000 and 1099.
HiSecOS: Valid access list numbers are between 1 and 10000.
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.248.12.2.4.8.1.8
hm2AgentOspfRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.4.8.1.9

hm2AgentOspfIfTable

table
.1.3.6.1.4.1.248.12.2.4.9 · 1 row entry · 5 columns
Open in standard view 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.  Augments 
ospfIfTable from the OSPF-MIB.
hm2AgentOspfIfEntry entry .1.3.6.1.4.1.248.12.2.4.9.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentOspfIfAuthKeyId
The identifier for the authentication key used
on this interface. This field is only meaningful
when the OSPF-MIB ospfIfAuthType is md5(2);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.4.9.1.1
hm2AgentOspfIfIpMtuIgnoreFlag
Configures the IP MTU Ignore Flag value for this OSPF interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.4.9.1.2
hm2AgentOspfIfPassiveMode
Flag to determine whether the interface is passive.
A passive interface will not participate in the OSPF
adjacency formation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.4.9.1.3
hm2AgentOspfIfAdvertiseSecondaries
Configures the advertisability of the secondary addresses
configured on this interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.4.9.1.4
hm2AgentOspfIfFastHelloMode
Configures the fast hello mode on this interface.
If enabled, hello packets are sent every 250ms,
ospfIfHelloInterval is ignored. The dead interval and spf delay
need to be re-configured accordingly for faster convergen…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.4.9.1.248

hm2AgentOspfVirtIfTable

table
.1.3.6.1.4.1.248.12.2.4.10 · 1 row entry · 1 columns
Open in standard view 
Information about this router's virtual inter-
faces.  Augments ospfVirtIfTable from the OSPF-MIB.
hm2AgentOspfVirtIfEntry entry .1.3.6.1.4.1.248.12.2.4.10.1
Information about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentOspfVirtIfAuthKeyId
The identifier for the authentication key used
on this virtual interface. This field is only meaningful
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.4.10.1.1

hm2AgentOspfAreaOpaqueLsdbTable

table
.1.3.6.1.4.1.248.12.2.4.16 · 1 row entry · 8 columns
Open in standard view 
The OSPF Process's Area Link State Database (LSDB). 
The LSDB contains type-10 Link State Advertisements 
from throughout the areas that the device is attached to.
hm2AgentOspfAreaOpaqueLsdbEntry entry .1.3.6.1.4.1.248.12.2.4.16.1
A single AreaOpaque Link State Advertisement.
Indexes
hm2AgentOspfAreaOpaqueLsdbAreaId hm2AgentOspfAreaOpaqueLsdbType hm2AgentOspfAreaOpaqueLsdbLsid hm2AgentOspfAreaOpaqueLsdbRouterId
Column Syntax OID
hm2AgentOspfAreaOpaqueLsdbAreaId
The 32 bit identifier of the Area from which
the LSA was received.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.4.16.1.1
hm2AgentOspfAreaOpaqueLsdbType
The type of the link state advertisement.
Each link state type has a separate advertisement
format.
Enumeration
Enumerated Values:
10areaOpaqueLink
 .1.3.6.1.4.1.248.12.2.4.16.1.2
hm2AgentOspfAreaOpaqueLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.4.16.1.3
hm2AgentOspfAreaOpaqueLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.248.12.2.4.16.1.4
hm2AgentOspfAreaOpaqueLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to det…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.16.1.5
hm2AgentOspfAreaOpaqueLsdbAge
This field is the age of the link state advertisement
in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.16.1.6
hm2AgentOspfAreaOpaqueLsdbChecksum
This field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.16.1.7
hm2AgentOspfAreaOpaqueLsdbAdvertisement
The entire Link State Advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.2.4.16.1.8

hm2AgentOspfLocalLsdbTable

table
.1.3.6.1.4.1.248.12.2.4.17 · 1 row entry · 9 columns
Open in standard view 
The OSPF Process's Link-Local Link State Database 
for non-virtual links. 
This table is identical to the OSPF LSDB Table 
in format, but contains only Link-Local Link State 
Advertisements for non-virtual links. The purpose is 
to allow Link-Local LSAs to be displayed for each 
non-virtual interface. This table is implemented to 
support type-9 LSAs which are defined 
in 'The OSPF Opaque LSA Option'.
hm2AgentOspfLocalLsdbEntry entry .1.3.6.1.4.1.248.12.2.4.17.1
A single Link State Advertisement.
Indexes
hm2AgentOspfLocalLsdbIpAddress hm2AgentOspfLocalLsdbAddressLessIf hm2AgentOspfLocalLsdbType hm2AgentOspfLocalLsdbLsid hm2AgentOspfLocalLsdbRouterId
Column Syntax OID
hm2AgentOspfLocalLsdbIpAddress
The IP Address of the interface from
which the LSA was received if the interface is
numbered.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.4.17.1.1
hm2AgentOspfLocalLsdbAddressLessIf
The Interface Index of the interface from
which the LSA was received if the interface is
unnumbered.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.2.4.17.1.2
hm2AgentOspfLocalLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
9localOpaqueLink
 .1.3.6.1.4.1.248.12.2.4.17.1.3
hm2AgentOspfLocalLsdbLsid
The Link State ID is an LS Type Specific field
containing a 32 bit identifier in IP address format;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.4.17.1.4
hm2AgentOspfLocalLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.248.12.2.4.17.1.5
hm2AgentOspfLocalLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to det…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.17.1.6
hm2AgentOspfLocalLsdbAge
This field is the age of the link state adver-
tisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.17.1.7
hm2AgentOspfLocalLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The check…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.17.1.8
hm2AgentOspfLocalLsdbAdvertisement
The entire Link State Advertisement, including
its header.

Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.2.4.17.1.9

hm2AgentOspfAsLsdbTable

table
.1.3.6.1.4.1.248.12.2.4.18 · 1 row entry · 7 columns
Open in standard view 
The OSPF Process's AS-scope LSA Link State Database. 
The Database contains the AS-scope Link State 
Advertisements from throughout the areas that 
the device is attached to. 
          
This table is identical to the OSPF LSDB Table 
in format, but contains only AS-scope Link State 
Advertisements.  The purpose is to allow AS-scope 
LSAs to be displayed once for the router rather 
than once in each non-stub area.
hm2AgentOspfAsLsdbEntry entry .1.3.6.1.4.1.248.12.2.4.18.1
A single Link State Advertisement.
Indexes
hm2AgentOspfAsLsdbType hm2AgentOspfAsLsdbLsid hm2AgentOspfAsLsdbRouterId
Column Syntax OID
hm2AgentOspfAsLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
11asOpaqueLink
 .1.3.6.1.4.1.248.12.2.4.18.1.1
hm2AgentOspfAsLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.4.18.1.2
hm2AgentOspfAsLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.248.12.2.4.18.1.3
hm2AgentOspfAsLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to det…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.18.1.4
hm2AgentOspfAsLsdbAge
This field is the age of the link state adver-
tisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.18.1.5
hm2AgentOspfAsLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The check…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.4.18.1.6
hm2AgentOspfAsLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.2.4.18.1.7

hm2AgentOspfAreaNSSATable

table
.1.3.6.1.4.1.248.12.2.4.248 · 1 row entry · 5 columns
Open in standard view 
Information about all the configured Not-So-Stubby-Area(NSSAs) in OSPF.  
Augments ospfAreaTable from the OSPF-MIB.
hm2AgentOspfAreaNSSAEntry entry .1.3.6.1.4.1.248.12.2.4.248.1
Information about a single Not-So-Stubby-Area(NSSA).
Augments ospfAreaEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentOspfAreaNSSAImportSummaries
When set to enabled, OSPF's summary routes are imported into
the NSSA as Type-3 summary-LSAs.
When set to disabled, summary routes are not imported
into the NSSA.
The default setting is enabled.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.4.248.1.1
hm2AgentOspfAreaNSSARedistribute
When set to enabled NSSA ASBRs will not redistribute external
routes into the NSSA and they will cease to originate Type-7
external LSAs for external routes.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.4.248.1.2
hm2AgentOspfAreaNSSADefaultInfoOriginate
Determines if the router will originate a Type-7 default LSA
into the NSSA. This command will cause a default LSA to be
originated only if the router is an NSSA ABR or ASBR.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.4.248.1.3
hm2AgentOspfAreaNSSADefaultMetric
Defines the metric value advertised in the Type-7 default LSA
originated by this router
Integer32r/w
Constraints:
range: 1-16777214
 .1.3.6.1.4.1.248.12.2.4.248.1.4
hm2AgentOspfAreaNSSADefaultMetricType
Defines the metric type advertised in the Type-7 default LSA
originated by this router
Enumerationr/w
Enumerated Values:
1ospfMetric
2comparable
3nonComparable
 .1.3.6.1.4.1.248.12.2.4.248.1.5

hm2AgentOspfIfMetricTable

table
.1.3.6.1.4.1.248.12.2.4.249 · 1 row entry · 1 columns
Open in standard view 
Information about interface metrics.
hm2AgentOspfIfMetricEntry entry .1.3.6.1.4.1.248.12.2.4.249.1
Information about interface metrics.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentOspfIfMetricCalculatedCost
Returns the actual cost value used by OSPF for
this interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.2.4.249.1.1

hm2AgentRouterVrrpOperTable

table obsolete
.1.3.6.1.4.1.248.12.2.9.1 · 1 row entry · 1 columns
Open in standard view 
Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
`hm2AgentRouterVrrpOperEntry' items.
hm2AgentRouterVrrpOperEntry entry .1.3.6.1.4.1.248.12.2.9.1.1
An entry in the table contains operational priority that is
associated with a virtual router.
Indexes
IF-MIBifIndex VRRP-MIBvrrpOperVrId
Column Syntax OID
hm2AgentRouterVrrpOperPriority obsolete
This object specifies the operational priority of the VRRP router.
This value will be afftected by both the tracking process and the
configured priority set by the vrrpOperPriority object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.9.1.1.1

hm2AgentSwitchIpHelperAddressTable

table
.1.3.6.1.4.1.248.12.2.11.8 · 1 row entry · 4 columns
Open in standard view 
Contains a list of IP helper addresses configured globally.
hm2AgentSwitchIpHelperAddressEntry entry .1.3.6.1.4.1.248.12.2.11.8.1
An IP Helper address that applies to packets received on any interface.
Indexes
hm2AgentSwitchIpHelperUdpPort hm2AgentSwitchIpHelperAddress
Column Syntax OID
hm2AgentSwitchIpHelperUdpPort
UDP port number. A relay entry with port 0 allows dhcp, time,
winnameserver, tacacs, dns, tftp, netbios-ns and netbios-dgm relay.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.248.12.2.11.8.1.1
hm2AgentSwitchIpHelperAddress
The IP Helper address assigned to this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.11.8.1.2
hm2AgentSwitchIpHelperHitCount
The number of times a packet has been forwarded or discarded according to this entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.11.8.1.3
hm2AgentSwitchIpHelperStatus
Creates a new entry in the global IP Helper address table.
Allowed values are:

createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.11.8.1.4

hm2AgentSwitchInternalVlanTable

table
.1.3.6.1.4.1.248.12.2.12.3 · 1 row entry · 2 columns
Open in standard view 
Contains a list of VLAN IDs used internally for port-based routing interfaces.
hm2AgentSwitchInternalVlanEntry entry .1.3.6.1.4.1.248.12.2.12.3.1
A VLAN ID internally assigned to a port-based routing interface.
Indexes
hm2AgentSwitchInternalVlanId
Column Syntax OID
hm2AgentSwitchInternalVlanId
A VLAN ID internally assigned to a port-based routing interface.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.248.12.2.12.3.1.1
hm2AgentSwitchInternalVlanIfIndex
Interface index of port-based routing interface using this VLAN ID.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.2.12.3.1.2

hm2AgentOspfQueueTable

table
.1.3.6.1.4.1.248.12.2.13.1 · 1 row entry · 6 columns
Open in standard view 
Table lists information about OSPFv2 message queue utilization.
hm2AgentOspfQueueEntry entry .1.3.6.1.4.1.248.12.2.13.1.1
Information on a specific OSPFv2 message queue.
Indexes
hm2AgentOspfQueueIndex
Column Syntax OID
hm2AgentOspfQueueIndex
Index value for this message queue.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.13.1.1.1
hm2AgentOspfQueueName
Name of an OSPFv2 message queue.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.12.2.13.1.1.2
hm2AgentOspfQueueLength
The number of messages currently in the message queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.13.1.1.3
hm2AgentOspfQueueHigh
The high water mark of the number of messages in the message queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.13.1.1.4
hm2AgentOspfQueueDrops
The number of items dropped because the message queue was full.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.13.1.1.5
hm2AgentOspfQueueLimit
The maximum number of messages this queue can hold.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.13.1.1.6

hm2AgentOspfSpfStatsTable

table
.1.3.6.1.4.1.248.12.2.15 · 1 row entry · 8 columns
Open in standard view 
Contains statistics for the twenty most recent SPF runs. 
Statistics are reported from the oldest SPF first to the most recent.
hm2AgentOspfSpfStatsEntry entry .1.3.6.1.4.1.248.12.2.15.1
Statistics for a single SPF run.
Indexes
hm2AgentOspfSpfIndex
Column Syntax OID
hm2AgentOspfSpfIndex
Integer that uniquely identifies an SPF run. This value is
incremented each time OSPF runs a full routing table calculation.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.1
hm2AgentOspfSpfStatsDeltaT
How long since this routing table calculation ran. The time is
given in seconds.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.2
hm2AgentOspfSpfStatsIntra
Number of milliseconds to compute intra-area routes.
milli-secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.3
hm2AgentOspfSpfStatsSumm
Number of milliseconds to compute inter-area routes.
milli-secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.4
hm2AgentOspfSpfStatsExt
Number of milliseconds to compute external routes.
milli-secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.5
hm2AgentOspfSpfStatsSpfTotal
Number of milliseconds for entire routing table calculation.
milli-secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.6
hm2AgentOspfSpfStatsRibUpdate
Number of milliseconds to update the common routing table.
milli-secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.15.1.7
hm2AgentOspfSpfStatsReason
Reasons why a routing table calculation was required.
R - new router LSA,
N - new Network LSA,
SN - new network summary LSA,
SA - new ASBR summary LSA,
X - new external LSA.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.12.2.15.1.8

hm2AgentEcmpCountTable

table
.1.3.6.1.4.1.248.12.2.18 · 1 row entry · 2 columns
Open in standard view 
A count of the number of routes with each number of ECMP next hops.
hm2AgentEcmpCountEntry entry .1.3.6.1.4.1.248.12.2.18.1
Number of IPv4 routes with a given number of next hops.
Indexes
hm2AgentEcmpNextHopCount
Column Syntax OID
hm2AgentEcmpNextHopCount
The number of next hops in a route. From 0 to the maximum number of
next hops in an ECMP route. The maximum varies by platform.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.248.12.2.18.1.1
hm2AgentEcmpRouteCount
The number of IPv4 routes with agentEcmpNextHopCount next hops.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.18.1.2

hm2AgentOspfNbrTable

table
.1.3.6.1.4.1.248.12.2.249 · 1 row entry · 1 columns
Open in standard view 
Information about this router's neighbors.
Augments ospfNbrTable from the OSPF-MIB.
hm2AgentOspfNbrEntry entry .1.3.6.1.4.1.248.12.2.249.1
Information about a single neighbor.
Augments ospfNbrEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentOspfNbrDeadTime
The neighbor's Dead Time is the amount of remaining time
since the last OSPF hello packet received, before
declaring the neighbor status as down.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.2.249.1.1

hm2AgentOspfRouteTable

table
.1.3.6.1.4.1.248.12.2.250 · 1 row entry · 4 columns
Open in standard view 
Information about this router's OSPF routes.
hm2AgentOspfRouteEntry entry .1.3.6.1.4.1.248.12.2.250.1
Information about a single route.
Indexes
hm2AgentOspfRouteNet hm2AgentOspfRouteMask
Column Syntax OID
hm2AgentOspfRouteNet
The IP Address of the Net or Subnet indicated
by the route.
INET-ADDRESS-MIBInetAddressIPv4
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.250.1.1
hm2AgentOspfRouteMask
The Subnet Mask that pertains to the Net or
Subnet.
INET-ADDRESS-MIBInetAddressIPv4
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.250.1.2
hm2AgentOspfRouteCost
The route cost calculated in the SPF algorithm to reach the network.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.250.1.3
hm2AgentOspfRouteProtoType
The type of route that was learned from OSPF.
Enumeration
Enumerated Values:
1intra
2inter
3ext-type1
4ext-type2
5nssa-type1
6nssa-type2
 .1.3.6.1.4.1.248.12.2.250.1.4

hm2AgentVrrpTrackingTable

table
.1.3.6.1.4.1.248.12.2.260.1 · 1 row entry · 6 columns
Open in standard view 
This table contains variables to define
an entry in the VRRP Tracking database.
hm2AgentVrrpTrackingEntry entry .1.3.6.1.4.1.248.12.2.260.1.1
The entries of the table.
Indexes
hm2AgentVrrpTrackIfIndex hm2AgentVrrpTrackVrid hm2AgentVrrpTrackId
Column Syntax OID
hm2AgentVrrpTrackIfIndex
DURABLE: { 1:all }
The interface number of the virtual router
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.260.1.1.1
hm2AgentVrrpTrackVrid
DURABLE: { 1:all }
The virtual router id for this virtual router
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.248.12.2.260.1.1.2
hm2AgentVrrpTrackId
DURABLE: { 1:all }
The id of the object being tracked
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.12.2.260.1.1.3
hm2AgentVrrpTrackDecrement
DURABLE: { 1:all }
The value by wich the current priority of the virtual router
is decremented when the tracked object goes DOWN.
Integer32r/w
Constraints:
range: 1-253
 .1.3.6.1.4.1.248.12.2.260.1.1.4
hm2AgentVrrpTrackOperStatus
Shows if the tracked object is currently UP or DOWN or NOT-READY
Enumeration
Enumerated Values:
1up
2down
3notReady
 .1.3.6.1.4.1.248.12.2.260.1.1.5
hm2AgentVrrpTrackRowStatus
DURABLE: { 1:all }
Defines the status of a vrrp tracking database entry.
Set to createAndGo(4) to create a new row.
Set to destroy(6) to delete an entry.
Reads as active(1) if the tracked object exists and is trackable,…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.260.1.1.6

hm2AgentVrrpExtTable

table
.1.3.6.1.4.1.248.12.2.260.2 · 1 row entry · 14 columns
Open in standard view 
This table contains variables to define
an entry in the VRRP enhancements database.
hm2AgentVrrpExtEntry entry .1.3.6.1.4.1.248.12.2.260.2.1
The entry of the hm2AgentVrrpExtTable.
Indexes
hm2AgentVrrpExtIfIndex hm2AgentVrrpExtVrid
Column Syntax OID
hm2AgentVrrpExtIfIndex
The interface number of the virtual router
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.260.2.1.1
hm2AgentVrrpExtVrid
The virtual router id for this virtual router
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.248.12.2.260.2.1.2
hm2AgentVrrpExtDomainId
The domain this virtual router is a member of. If set to
0, the virtual router is not a member of any domain.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.248.12.2.260.2.1.3
hm2AgentVrrpExtDomainRole
The role of this virtual router in its domain. This is none(1) if
the virtual router is not member of a domain, supervisor(3) if it
is the supervisor of its domain, member(2) otherwise.
Enumerationr/w
Enumerated Values:
1none
2member
3supervisor
 .1.3.6.1.4.1.248.12.2.260.2.1.4
hm2AgentVrrpExtDomainStatus
Shows if the domain configuration is correct for this virtual router
Enumeration
Enumerated Values:
1noError
2noSupervisor
3supervisorDown
 .1.3.6.1.4.1.248.12.2.260.2.1.5
hm2AgentVrrpExtAdvertAddress
The IP address advertisements of the virtual router are sent to
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.260.2.1.6
hm2AgentVrrpExtAdvertTimer
This is used to set the interval between advertisements in
milliseconds. This accesses the same value as
vrrpOperAdvertisementInterval.
milli-secondsInteger32r/w
Constraints:
range: 100-255000
 .1.3.6.1.4.1.248.12.2.260.2.1.7
hm2AgentVrrpExtCfgPriority
The configured priority of the virtual router. This can be
different from the operating priority if tracked objects are down
or the virtual router is the ip address owner
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.248.12.2.260.2.1.8
hm2AgentVrrpExtNotifyAddress
The IP address notifications of the virtual router are sent to
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.260.2.1.9
hm2AgentVrrpExtNotifyLinkdown
Enables or disables sending of notification messages if the
virtual router's interface goes down.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.260.2.1.10
hm2AgentVrrpExtPreemptionDelay
Time (in seconds) after startup of the virtual router by which the
preemption of a Master with a lower priority is delayed.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.248.12.2.260.2.1.11
hm2AgentVrrpPrimaryVirtualAddress
The virtual IP address in the subnet of the primary ip address on
the interface. If no match is found, an unspecified virtual address
is returned. If no virtual address is configured, 0.0.0.0 is returned.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.2.260.2.1.12
hm2AgentVrrpExtMethod
The source of the VRRP instance. User can set the object to none(1), config(2), ttdp(3).
Enumerationr/w
Enumerated Values:
1none
2config
3ttdp
 .1.3.6.1.4.1.248.12.2.260.2.1.13
hm2AgentVrrpExtProxyarp
This object specifies if proxy arp functionality must be
associated with a vrrp instance.
Possible values:
- true: enable proxy arp on change of vrrpOperState to master
- false: No impact
NOTE: Set the value to true wh…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.2.260.2.1.14

hm2AgentVrrpDomainTable

table
.1.3.6.1.4.1.248.12.2.260.3 · 1 row entry · 7 columns
Open in standard view 
This table contains variables to define
an entry in the VRRP domain database.
hm2AgentVrrpDomainEntry entry .1.3.6.1.4.1.248.12.2.260.3.1
The entries of the table.
Indexes
hm2AgentVrrpDomainId
Column Syntax OID
hm2AgentVrrpDomainId
The domain ID.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.248.12.2.260.3.1.1
hm2AgentVrrpDomainMemberSendAdv
DURABLE: { 1:all }
Determines if the members of this domain send advertisement packets.
If set to disabled(2), only the supervisor of the domain sends packets.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.2.260.3.1.2
hm2AgentVrrpDomainStatus
Shows if the configuration of the domain is complete.
Enumeration
Enumerated Values:
1noError
2noSupervisor
3supervisorDown
 .1.3.6.1.4.1.248.12.2.260.3.1.3
hm2AgentVrrpDomainSupervisorIfIndex
The interface number of the supervisor of the domain
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.2.260.3.1.4
hm2AgentVrrpDomainSupervisorVrid
The virtual router id of the supervisor of the domain. 0 if unconfigured
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.260.3.1.5
hm2AgentVrrpDomainOperPriority
The current operating priority of the domain. This can be
different from the configured priority if tracked objects are down.
For domain members this is the priority of the supervisor of that
Domain if the supervisor is…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.12.2.260.3.1.6
hm2AgentVrrpDomainSupervisorOperState
Shows the current operational state of the domain supervisor.
Enumeration
Enumerated Values:
1initialize
2backup
3master
4unknown
 .1.3.6.1.4.1.248.12.2.260.3.1.7

hm2AgentStaticNeighbourTable

table
.1.3.6.1.4.1.248.12.2.270.10 · 1 row entry · 5 columns
Open in standard view 
.
hm2AgentStaticNeighbourEntry entry .1.3.6.1.4.1.248.12.2.270.10.1
.
Indexes
hm2AgentStaticNeighbourAddressType hm2AgentStaticNeighbourAddress
Column Syntax OID
hm2AgentStaticNeighbourAddressType
.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.12.2.270.10.1.1
hm2AgentStaticNeighbourAddress
.
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.248.12.2.270.10.1.2
hm2AgentStaticNeighbourPhysAddress
.
OctetStringr/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.248.12.2.270.10.1.3
hm2AgentStaticNeighbourIfIndex
.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.2.270.10.1.4
hm2AgentStaticNeighbourRowStatus
The status of this entry. Setting this object destroy will remove the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.2.270.10.1.5

hm2AgentDynamicNeighbourTable

table
.1.3.6.1.4.1.248.12.2.270.11 · 1 row entry · 5 columns
Open in standard view 
.
hm2AgentDynamicNeighbourEntry entry .1.3.6.1.4.1.248.12.2.270.11.1
.
Indexes
hm2AgentDynamicNeighbourAddressType hm2AgentDynamicNeighbourAddress
Column Syntax OID
hm2AgentDynamicNeighbourAddressType
.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.12.2.270.11.1.1
hm2AgentDynamicNeighbourAddress
.
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.248.12.2.270.11.1.2
hm2AgentDynamicNeighbourPhysAddress
.
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.248.12.2.270.11.1.3
hm2AgentDynamicNeighbourIfIndex
.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.2.270.11.1.4
hm2AgentDynamicNeighbourAction
.
Enumerationr/w
Enumerated Values:
1other
2delete
3static
 .1.3.6.1.4.1.248.12.2.270.11.1.5