hm2AgentOspfSpfHoldTime

HM2-PLATFORM-ROUTING-MIB · .1.3.6.1.4.1.248.12.2.4.13
MIB view Table view

Object

scalar r/w Integer32 
Minimum time (in seconds) between two
consecutive SPF calculations. It can
be an integer from 0 to 65535. The
default time is 10 seconds. A value
of 0 means that there is no delay;
that is, two SPF calculations can
be done, one immediately after the
other.

Context

MIB
HM2-PLATFORM-ROUTING-MIB
OID
.1.3.6.1.4.1.248.12.2.4.13
Type
scalar
Access
readwrite
Status
current
Parent
hm2AgentRouterOspfConfigGroup
Siblings
23

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2AgentOspfDefaultMetric
Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid rang…
scalarInteger32.1.3.6.1.4.1.248.12.2.4.1
hm2AgentOspfVirtIfTable
Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
table-.1.3.6.1.4.1.248.12.2.4.10
hm2AgentRouterOspfRFC1583CompatibilityMode
From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the prefer…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.2.4.11
hm2AgentOspfSpfDelayTime
Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A …
scalarInteger32.1.3.6.1.4.1.248.12.2.4.12
hm2AgentOspfAutoCostRefBw
Auto cost reference bandwidth of the router interfaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
scalarUnsigned32.1.3.6.1.4.1.248.12.2.4.14
hm2AgentOspfOpaqueLsaSupport
The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.248.12.2.4.15
hm2AgentOspfAreaOpaqueLsdbTable
The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.
table-.1.3.6.1.4.1.248.12.2.4.16
hm2AgentOspfLocalLsdbTable
The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Adve…
table-.1.3.6.1.4.1.248.12.2.4.17
hm2AgentOspfAsLsdbTable
The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. …
table-.1.3.6.1.4.1.248.12.2.4.18
hm2AgentOspfDefaultPassiveMode
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.248.12.2.4.19
hm2AgentOspfDefaultMetricConfigured
Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.248.12.2.4.2
hm2AgentOspfRoutePrefIntraArea
The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
scalarInteger32.1.3.6.1.4.1.248.12.2.4.20
hm2AgentOspfRoutePrefInterArea
The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
scalarInteger32.1.3.6.1.4.1.248.12.2.4.21
hm2AgentOspfRoutePrefExternal
The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable.
scalarInteger32.1.3.6.1.4.1.248.12.2.4.22
hm2AgentOspfAreaNSSATable
Information about all the configured Not-So-Stubby-Area(NSSAs) in OSPF. Augments ospfAreaTable from the OSPF-MIB.
table-.1.3.6.1.4.1.248.12.2.4.248
hm2AgentOspfIfMetricTable
Information about interface metrics.
table-.1.3.6.1.4.1.248.12.2.4.249
hm2AgentOspfDefaultInfoOriginate
Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.248.12.2.4.3
hm2AgentOspfDefaultInfoOriginateAlways
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a def…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.248.12.2.4.4
hm2AgentOspfDefaultInfoOriginateMetric
Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid range …
scalarInteger32.1.3.6.1.4.1.248.12.2.4.5
hm2AgentOspfDefaultInfoOriginateMetricConfigured
Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is not allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.248.12.2.4.6
hm2AgentOspfDefaultInfoOriginateMetricType
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
scalarEnumeration.1.3.6.1.4.1.248.12.2.4.7
hm2AgentOspfRouteRedistTable
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP,…
table-.1.3.6.1.4.1.248.12.2.4.8
hm2AgentOspfIfTable
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
table-.1.3.6.1.4.1.248.12.2.4.9