hm2AgentOspfIfMetricTable

HM2-PLATFORM-ROUTING-MIB · .1.3.6.1.4.1.248.12.2.4.249

Object

table

Information about interface metrics.

Context

MIB: HM2-PLATFORM-ROUTING-MIB
OID: .1.3.6.1.4.1.248.12.2.4.249
Type: table
Status: current
Parent: hm2AgentRouterOspfConfigGroup
Siblings: 23
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hm2AgentOspfDefaultMetric Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid rang…	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.1`
hm2AgentOspfVirtIfTable Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.248.12.2.4.10`
hm2AgentRouterOspfRFC1583CompatibilityMode From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the prefer…	scalar	HM2-TC-MIBHmEnabledStatus	`.1.3.6.1.4.1.248.12.2.4.11`
hm2AgentOspfSpfDelayTime Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A …	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.12`
hm2AgentOspfSpfHoldTime Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay…	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.13`
hm2AgentOspfAutoCostRefBw Auto cost reference bandwidth of the router interfaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.	scalar	Unsigned32	`.1.3.6.1.4.1.248.12.2.4.14`
hm2AgentOspfOpaqueLsaSupport The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.248.12.2.4.15`
hm2AgentOspfAreaOpaqueLsdbTable The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.	table	-	`.1.3.6.1.4.1.248.12.2.4.16`
hm2AgentOspfLocalLsdbTable The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Adve…	table	-	`.1.3.6.1.4.1.248.12.2.4.17`
hm2AgentOspfAsLsdbTable The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. …	table	-	`.1.3.6.1.4.1.248.12.2.4.18`
hm2AgentOspfDefaultPassiveMode Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.248.12.2.4.19`
hm2AgentOspfDefaultMetricConfigured Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.248.12.2.4.2`
hm2AgentOspfRoutePrefIntraArea The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.20`
hm2AgentOspfRoutePrefInterArea The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.21`
hm2AgentOspfRoutePrefExternal The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable.	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.22`
hm2AgentOspfAreaNSSATable Information about all the configured Not-So-Stubby-Area(NSSAs) in OSPF. Augments ospfAreaTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.248.12.2.4.248`
hm2AgentOspfDefaultInfoOriginate Flag to determine, whether OSPF can advertise a default-route learned from another protocol.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.248.12.2.4.3`
hm2AgentOspfDefaultInfoOriginateAlways When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a def…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.248.12.2.4.4`
hm2AgentOspfDefaultInfoOriginateMetric Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid range …	scalar	Integer32	`.1.3.6.1.4.1.248.12.2.4.5`
hm2AgentOspfDefaultInfoOriginateMetricConfigured Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is not allowed.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.248.12.2.4.6`
hm2AgentOspfDefaultInfoOriginateMetricType Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).	scalar	Enumeration	`.1.3.6.1.4.1.248.12.2.4.7`
hm2AgentOspfRouteRedistTable This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP,…	table	-	`.1.3.6.1.4.1.248.12.2.4.8`
hm2AgentOspfIfTable The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.248.12.2.4.9`

Child Objects