hm2SigConTrapCauseIndex

HM2-DIAGNOSTIC-MIB · .1.3.6.1.4.1.248.11.22.1.3.1.1.1.4
MIB view Table view

Object

column SNMPv2-SMIInteger32 
This attribute specifies the entity which produces the trap.
power-supply: 		index of power-supply table
link-failure: 		index of interface table
temperature:  		0
ext-nvm-removal:		(1) sd, (2) usb, (3) serial (not supported yet)
ext-nvm-not-in-sync: 	(1) sd, (2) usb, (3) serial (not supported yet)
ring-redundancy:		(1) MRP, (2) PRP, (3) HSR, (4) DLR  
ext-nvm-update-enabled:	(1) sd, (2) usb, (3) serial (not supported yet)
no-link:			index of interface table
ethernet-loops:       index of interface table
humidity:         0
stp-port-blocked:          index of interface table    
0: other errors

Context

MIB
HM2-DIAGNOSTIC-MIB
OID
.1.3.6.1.4.1.248.11.22.1.3.1.1.1.4
Type
column
Access
readonly
Status
current
Parent
hm2SigConCommonEntry
Table
hm2SigConCommonTable
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2SigConID
This index is used to identify the associated signalling contact.
columnInteger32.1.3.6.1.4.1.248.11.22.1.3.1.1.1.1
hm2SigConSenseTemperature
Sets the monitoring of the device temperature.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.10
hm2SigConSenseFan
Sets the monitoring of the device fan modules.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.11
hm2SigConSenseModuleRemoval
Sets the monitoring of module removal (platform dependant).
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.12
hm2SigConSenseExtNvmRemoval
Sets the monitoring of the external non-volatile memory removal.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.13
hm2SigConSenseExtNvmNotInSync
Sets the monitoring whether the external non-volatile memory is in sync with the configuration in NVRAM.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.14
hm2SigConSenseRingRedundancy
Sets the monitoring of the ring redundancy.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.15
hm2SigConSenseEthernetLoops
Sets the monitoring for Ethernet loops.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.16
hm2SigConSenseHumidity
Sets the monitoring of the device humidity.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.17
hm2SigConSenseStpPortBlock
Sets the monitoring for STP loops.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.18
hm2SigConTrapEnable
Determines whether a trap shall be sent or not, when the signal contact operating state changes.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.2
hm2SigConTrapCause
This object identifies the cause for a trap. The index of the entity which produces the trap is specified by hm2SigConTrapCauseIndex.
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.3
hm2SigConMode
This attribute specifies the behavior of the relay contact. The factory settings for signal contact 1 is monitoring the correct operation of entries specified to be survived. When…
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.5
hm2SigConOperState
This attribute shows the current operating state of the signal contact.
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.6
hm2SigConOperTimeStamp
This attribute shows local system time (hm2SystemLocalTime) of the last hm2SigConOperState change.
columnHM2-TC-MIBHmTimeSeconds1970.1.3.6.1.4.1.248.11.22.1.3.1.1.1.7
hm2SigConManualActivate
When operating in manual mode, the signal contact state can be set by this attribute.
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.8
hm2SigConSenseLinkFailure
Sets the monitoring of the network connection(s).
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.9