hm2SigConTrapCause

HM2-DIAGNOSTIC-MIB · .1.3.6.1.4.1.248.11.22.1.3.1.1.1.3
MIB view Table view

Object

column Enumeration 
This object identifies the cause for a trap. 
The index of the entity which produces the trap
is specified by hm2SigConTrapCauseIndex.

Context

MIB
HM2-DIAGNOSTIC-MIB
OID
.1.3.6.1.4.1.248.11.22.1.3.1.1.1.3
Type
column
Access
readonly
Status
current
Parent
hm2SigConCommonEntry
Table
hm2SigConCommonTable
Siblings
17

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2power-supply
3link-failure
4temperature
5fan-failure
6module-removal
7ext-nvm-removal
8ext-nvm-not-in-sync
9ring-redundancy
10password-change
11password-min-length
12password-policy-not-configured
13password-policy-inactive
14telnet-enabled
15http-enabled
16snmp-unsecure
17sysmon-enabled
18ext-nvm-update-enabled
19no-link
20hidisc-enabled
21ext-nvm-config-load-unsecure
23https-certificate-warning
24modbus-tcp-enabled
25ethernet-ip-enabled
26profinet-io-enabled
27ethernet-loops
28humidity
29pml-disabled
30stp-port-blocked

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2SigConID
This index is used to identify the associated signalling contact.
columnInteger32.1.3.6.1.4.1.248.11.22.1.3.1.1.1.1
hm2SigConSenseTemperature
Sets the monitoring of the device temperature.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.10
hm2SigConSenseFan
Sets the monitoring of the device fan modules.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.11
hm2SigConSenseModuleRemoval
Sets the monitoring of module removal (platform dependant).
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.12
hm2SigConSenseExtNvmRemoval
Sets the monitoring of the external non-volatile memory removal.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.13
hm2SigConSenseExtNvmNotInSync
Sets the monitoring whether the external non-volatile memory is in sync with the configuration in NVRAM.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.14
hm2SigConSenseRingRedundancy
Sets the monitoring of the ring redundancy.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.15
hm2SigConSenseEthernetLoops
Sets the monitoring for Ethernet loops.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.16
hm2SigConSenseHumidity
Sets the monitoring of the device humidity.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.17
hm2SigConSenseStpPortBlock
Sets the monitoring for STP loops.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.18
hm2SigConTrapEnable
Determines whether a trap shall be sent or not, when the signal contact operating state changes.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.2
hm2SigConTrapCauseIndex
This attribute specifies the entity which produces the trap. power-supply: index of power-supply table link-failure: index of interface table temperature: 0 ext-nvm-removal…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.22.1.3.1.1.1.4
hm2SigConMode
This attribute specifies the behavior of the relay contact. The factory settings for signal contact 1 is monitoring the correct operation of entries specified to be survived. When…
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.5
hm2SigConOperState
This attribute shows the current operating state of the signal contact.
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.6
hm2SigConOperTimeStamp
This attribute shows local system time (hm2SystemLocalTime) of the last hm2SigConOperState change.
columnHM2-TC-MIBHmTimeSeconds1970.1.3.6.1.4.1.248.11.22.1.3.1.1.1.7
hm2SigConManualActivate
When operating in manual mode, the signal contact state can be set by this attribute.
columnEnumeration.1.3.6.1.4.1.248.11.22.1.3.1.1.1.8
hm2SigConSenseLinkFailure
Sets the monitoring of the network connection(s).
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.22.1.3.1.1.1.9