h3cDot11PreambleLen

H3C-DOT11-CFG-MIB · .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.7
MIB view Table view

Object

column r/w H3C-DOT11-REF-MIBH3cDot11PreambleType 
Represents whether use long or short preamble for 802.11 MAC
frame.
When h3cDot11CfgRadioType is either dot11b or dot11g,
then value for h3cDot11PreambleLen will be valid.
Otherwise, the value for it will be invalid.

Context

MIB
H3C-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.7
Type
column
Access
readwrite
Status
current
Parent
h3cDot11RadioToConfigEntry
Table
h3cDot11RadioToConfigTable
Siblings
27

Syntax

H3C-DOT11-REF-MIBH3cDot11PreambleType
Source
H3C-DOT11-REF-MIBH3cDot11PreambleType
Base type
Enumeration

Values & Constraints

Type Values
1long
2short

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cDot11APTemplateNameCfg
Represents the name of AP template.
columnOctetString.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.1
h3cDot11CfgWorkMode
Represents work mode of the radio.
columnH3C-DOT11-REF-MIBH3cDot11WorkMode.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.10
h3cDot11CfgPwrAttValue
Represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.11
h3cDot11RadioTxArithmetic
Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the b…
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.12
h3cDot11CfgChannelLockStat
Represents locked status of channel on the radio.
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.13
h3cDot11CfgPowerLockStat
Represents locked status of power on the radio.
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.14
h3cDot11CfgLBRdGroupId
Represents the load balance group ID allocated for the radio.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.15
h3cDot11CfgRRMSDRdGroupId
Represents the RRM self-decisive group ID allocated for the radio.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.16
h3cDot11CfgRadioType2
Represents the radio will work with which 802.11 radio type.
columnH3C-DOT11-REF-MIBH3cDot11RadioType2.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.17
h3cDot11CfgIDSEnable
Represents whether intrusion detection is enabled for this radio.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.18
h3cDot11CfgSaEnable
Represents whether spectrum analysis is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.19
h3cDot11CfgRadioID
Represents each radio.
columnH3C-DOT11-REF-MIBH3cDot11RadioScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.2
h3cDot11CfgSaCltRtFFTData
Represents whether to collect real-time FFT data for this radio.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.20
h3cDot11CfgSaBand
Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be a…
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.21
h3cDot11CfgSaRptDevType
Represents which types of interference devices should be reported.
columnBits.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.22
h3cDot11CfgSaTrapDevEnable
Represents whether trap is enabled for an interference device type.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.23
h3cDot11CfgSaTrapDevType
Represents for which interference device types the AP will send traps when trap sending is enabled.
columnBits.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.24
h3cDot11CfgSaTrapAQEnable
Represents whether the channel quality trap is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.25
h3cDot11CfgSaTrapAQThreshold
Represents the channel quality threshold. When the channel quality is below this value, the channel quality trap will be sent.
columnInteger32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.26
h3cDot11CfgSaDrivenRRMEnable
Configures whether to run RRM when the AP detects a certain level of interference.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.27
h3cDot11CfgSaDrivenRRMSnt
Configures the threshold for triggering RRM. When the interference level for the AP exceeds the threshold , RRM initiates local dynamic frequency selection (DFS) and changes the …
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.28
h3cDot11CfgRadioPolicyName
Represents the name of radio policy.
columnOctetString.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.3
h3cDot11CfgRadioType
Represents the radio will work with which 802.11 radio type.
columnH3C-DOT11-REF-MIBH3cDot11RadioType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.4
h3cDot11CfgChannel
Represents the channel allocation of radio.
columnH3C-DOT11-REF-MIBH3cDot11ChannelScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.5
h3cDot11CfgMaxTxPowerLevel
Represents the maximal transmit power scope for AP.
columndbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.6
h3cDot11CfgRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.8
h3cDot11CfgRdElementID
Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.9