h3cDot11CfgSaTrapAQThreshold

H3C-DOT11-CFG-MIB · .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.26
MIB view Table view

Object

column r/w Integer32 
Represents the channel quality threshold.  When the channel quality
is below this value, the channel quality trap will be sent.

Context

MIB
H3C-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.26
Type
column
Access
readwrite
Status
current
Parent
h3cDot11RadioToConfigEntry
Table
h3cDot11RadioToConfigTable
Siblings
27

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-100

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cDot11APTemplateNameCfg
Represents the name of AP template.
columnOctetString.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.1
h3cDot11CfgWorkMode
Represents work mode of the radio.
columnH3C-DOT11-REF-MIBH3cDot11WorkMode.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.10
h3cDot11CfgPwrAttValue
Represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.11
h3cDot11RadioTxArithmetic
Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the b…
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.12
h3cDot11CfgChannelLockStat
Represents locked status of channel on the radio.
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.13
h3cDot11CfgPowerLockStat
Represents locked status of power on the radio.
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.14
h3cDot11CfgLBRdGroupId
Represents the load balance group ID allocated for the radio.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.15
h3cDot11CfgRRMSDRdGroupId
Represents the RRM self-decisive group ID allocated for the radio.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.16
h3cDot11CfgRadioType2
Represents the radio will work with which 802.11 radio type.
columnH3C-DOT11-REF-MIBH3cDot11RadioType2.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.17
h3cDot11CfgIDSEnable
Represents whether intrusion detection is enabled for this radio.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.18
h3cDot11CfgSaEnable
Represents whether spectrum analysis is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.19
h3cDot11CfgRadioID
Represents each radio.
columnH3C-DOT11-REF-MIBH3cDot11RadioScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.2
h3cDot11CfgSaCltRtFFTData
Represents whether to collect real-time FFT data for this radio.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.20
h3cDot11CfgSaBand
Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be a…
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.21
h3cDot11CfgSaRptDevType
Represents which types of interference devices should be reported.
columnBits.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.22
h3cDot11CfgSaTrapDevEnable
Represents whether trap is enabled for an interference device type.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.23
h3cDot11CfgSaTrapDevType
Represents for which interference device types the AP will send traps when trap sending is enabled.
columnBits.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.24
h3cDot11CfgSaTrapAQEnable
Represents whether the channel quality trap is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.25
h3cDot11CfgSaDrivenRRMEnable
Configures whether to run RRM when the AP detects a certain level of interference.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.27
h3cDot11CfgSaDrivenRRMSnt
Configures the threshold for triggering RRM. When the interference level for the AP exceeds the threshold , RRM initiates local dynamic frequency selection (DFS) and changes the …
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.28
h3cDot11CfgRadioPolicyName
Represents the name of radio policy.
columnOctetString.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.3
h3cDot11CfgRadioType
Represents the radio will work with which 802.11 radio type.
columnH3C-DOT11-REF-MIBH3cDot11RadioType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.4
h3cDot11CfgChannel
Represents the channel allocation of radio.
columnH3C-DOT11-REF-MIBH3cDot11ChannelScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.5
h3cDot11CfgMaxTxPowerLevel
Represents the maximal transmit power scope for AP.
columndbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.6
h3cDot11PreambleLen
Represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLen will be valid. Otherwi…
columnH3C-DOT11-REF-MIBH3cDot11PreambleType.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.7
h3cDot11CfgRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.8
h3cDot11CfgRdElementID
Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.9