h3cDot11CfgWorkMode
H3C-DOT11-CFG-MIB ·
.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.10
Object
Represents work mode of the radio.
Context
- MIB
- H3C-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.4.3.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot11RadioToConfigEntry
- Table
- h3cDot11RadioToConfigTable
- Siblings
- 27
Syntax
H3C-DOT11-REF-MIBH3cDot11WorkMode
- Source
- H3C-DOT11-REF-MIBH3cDot11WorkMode
- Base type
Enumeration
Values & Constraints
Type Values
1 | normal |
2 | monitor |
3 | hybrid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11APTemplateNameCfg Represents the name of AP template. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.1 |
| h3cDot11CfgPwrAttValue Represents the value of power attenuation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.11 |
| h3cDot11RadioTxArithmetic Represents the transmission arithmetic of the radio.
The following values are supported:
quality - Consider the quality first during the transmission.
bandwidth - Consider the b… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.12 |
| h3cDot11CfgChannelLockStat Represents locked status of channel on the radio. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.13 |
| h3cDot11CfgPowerLockStat Represents locked status of power on the radio. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.14 |
| h3cDot11CfgLBRdGroupId Represents the load balance group ID allocated for the radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.15 |
| h3cDot11CfgRRMSDRdGroupId Represents the RRM self-decisive group ID allocated for the radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.16 |
| h3cDot11CfgRadioType2 Represents the radio will work with which 802.11 radio type. | column | H3C-DOT11-REF-MIBH3cDot11RadioType2 | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.17 |
| h3cDot11CfgIDSEnable Represents whether intrusion detection is enabled for this radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.18 |
| h3cDot11CfgSaEnable Represents whether spectrum analysis is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.19 |
| h3cDot11CfgRadioID Represents each radio. | column | H3C-DOT11-REF-MIBH3cDot11RadioScopeType | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.2 |
| h3cDot11CfgSaCltRtFFTData Represents whether to collect real-time FFT data for this radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.20 |
| h3cDot11CfgSaBand Represents which band of channels will be monitored when collection
real-time FFT data is enabled for this radio. Detection of
interference devices and air quality will also be a… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.21 |
| h3cDot11CfgSaRptDevType Represents which types of interference devices should be reported. | column | Bits | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.22 |
| h3cDot11CfgSaTrapDevEnable Represents whether trap is enabled for an interference device type. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.23 |
| h3cDot11CfgSaTrapDevType Represents for which interference device types the AP will send traps
when trap sending is enabled. | column | Bits | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.24 |
| h3cDot11CfgSaTrapAQEnable Represents whether the channel quality trap is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.25 |
| h3cDot11CfgSaTrapAQThreshold Represents the channel quality threshold. When the channel quality
is below this value, the channel quality trap will be sent. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.26 |
| h3cDot11CfgSaDrivenRRMEnable Configures whether to run RRM when the AP detects
a certain level of interference. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.27 |
| h3cDot11CfgSaDrivenRRMSnt Configures the threshold for triggering RRM. When the
interference level for the AP exceeds the threshold
, RRM initiates local dynamic frequency selection (DFS)
and changes the … | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.28 |
| h3cDot11CfgRadioPolicyName Represents the name of radio policy. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.3 |
| h3cDot11CfgRadioType Represents the radio will work with which 802.11 radio type. | column | H3C-DOT11-REF-MIBH3cDot11RadioType | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.4 |
| h3cDot11CfgChannel Represents the channel allocation of radio. | column | H3C-DOT11-REF-MIBH3cDot11ChannelScopeType | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.5 |
| h3cDot11CfgMaxTxPowerLevel Represents the maximal transmit power scope for AP. | column | dbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.6 |
| h3cDot11PreambleLen Represents whether use long or short preamble for 802.11 MAC
frame.
When h3cDot11CfgRadioType is either dot11b or dot11g,
then value for h3cDot11PreambleLen will be valid.
Otherwi… | column | H3C-DOT11-REF-MIBH3cDot11PreambleType | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.7 |
| h3cDot11CfgRadioStatus Represents the radio admin status whether is enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.8 |
| h3cDot11CfgRdElementID Represents the element ID of this radio. It comprises two parts.
The highest 24 bits are AP element ID and the lowest 8 bits are
radio ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.75.4.3.2.1.9 |