txgConfigPort2ItuChannel
G6-MSP1000-MIB ·
.1.3.6.1.4.1.3181.10.6.1.94.4.1.5
Object
column
r/w
Enumeration
Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.
Context
- MIB
- G6-MSP1000-MIB
- OID
.1.3.6.1.4.1.3181.10.6.1.94.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- txgConfigEntry
- Table
- txgConfigTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | fixed |
22 | ch11 |
24 | ch12 |
26 | ch13 |
28 | ch14 |
30 | ch15 |
32 | ch16 |
34 | ch17 |
36 | ch18 |
38 | ch19 |
40 | ch20 |
42 | ch21 |
44 | ch22 |
46 | ch23 |
48 | ch24 |
50 | ch25 |
52 | ch26 |
54 | ch27 |
56 | ch28 |
58 | ch29 |
60 | ch30 |
62 | ch31 |
64 | ch32 |
66 | ch33 |
68 | ch34 |
70 | ch35 |
72 | ch36 |
74 | ch37 |
76 | ch38 |
78 | ch39 |
80 | ch40 |
82 | ch41 |
84 | ch42 |
86 | ch43 |
88 | ch44 |
90 | ch45 |
92 | ch46 |
94 | ch47 |
96 | ch48 |
98 | ch49 |
100 | ch50 |
102 | ch51 |
104 | ch52 |
106 | ch53 |
108 | ch54 |
110 | ch55 |
112 | ch56 |
114 | ch57 |
116 | ch58 |
118 | ch59 |
120 | ch60 |
122 | ch61 |
124 | ch62 |
126 | ch63 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| txgConfigIndex Automatically generated | column | Integer32 | .1.3.6.1.4.1.3181.10.6.1.94.4.1.1 |
| txgConfigBertPattern Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.10 |
| txgConfigSfpDeltaInterval This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.11 |
| txgConfigSfpDeltaThreshold This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.12 |
| txgConfigTxgDatarate This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.2 |
| txgConfigTxgOperationMode This parameter defines the data path through the module when an internal cross connect is avalable. It is also used to setup a permanent bit error rate test. (most settings apply… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.3 |
| txgConfigPort1ItuChannel Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.4 |
| txgConfigDeactivatePort1 When enabled, the optical interface is disabled and communication is cut. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.6 |
| txgConfigDeactivatePort2 When enabled, the optical interface is disabled and communication is cut. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.7 |
| txgConfigFrontPanelMode Determines what is displayed on the front panel, when available. Also controls the modules local buttons. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.8 |
| txgConfigLossOfSignalHandling When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.94.4.1.9 |