job-input-auto-continue-timeout
FUTURESMART-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35
Object
scalar
optional
r/w
Integer32
The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device will continue processing the job as if a continue event occurred, such as the front panel continue key being pressed. If the value is -1, the device does not automatically continue after a job related continuable error occurs. If the value is 0, the device immediately continues. If the value is greater than 0, the value represents the timeout value in seconds
Context
- MIB
- FUTURESMART-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35- Type
- scalar
- Access
- readwrite
- Status
- optional
- Parent
- status-system
- Siblings
- 25
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| automatic-daylight-savings optional Determines whether or not the automatic adjustment for daylight
savings time is enabled. If it's enabled the device local time
will be automatically adjusted for DST period. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 |
| daylight-savings-start optional A C structure containing the following fields:
typedef struct {
ubyte hour; /* hour: 0 to 23 */
ubyte weekday; /* weekday: 0(Sunday) to 6 */
ubyte … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 |
| daylight-savings-end optional A C structure containing the following fields:
typedef struct {
ubyte hour; /* hour: 0 to 23 */
ubyte weekday; /* weekday: 0(Sunday) to 6 */
ubyte … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 |
| daylight-savings-offset optional Controls the offset in minutes to be added to the time when DST
is in effect. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 |
| daylight-savings-reset optional This object is used to reset (set back to factory default for
the current time zone) or read the current status of the DST
settings. When Set to eResetToDefault, this object can b… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 |
| warning-log-clear optional Setting this object clears all the entries in the warning log
sub-tree | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 |
| email-service-operational optional To check if Email service is operational on the device. Email
is operational if email feature is enabled on the device and
the SMTP gateway is configured. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.111 |
| date-and-time optional A C structure containing the following fields: typedef
struct {
ubyte yr; /* year: 0 to 99 */
ubyte mon; /* month: 1 to 12 */
ubyte day; /* day: 1 to 31 */
… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 |
| service-id optional A read of this object will return the current SERVICE ID value
in the printer. The format is 'YYDDD' where: \\
YY = calendar year - 1990 \\
DDD = (calendar month - 1) * … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 |
| display | node | - | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 |
| time-display optional Controls front-panel time display format. Set to
eTimeDisplayTwelveHour for AM/PM display. Set to
eTimeDisplayTwentyFourHour for military-type display. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 |
| job-input-auto-continue-mode optional Returns or sets the device behavior when the desired media is
not currently available. \\
cCancelJob - The device cancels the job. The device POS
should explain what happens… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 |
| background-message | node | - | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 |
| error-log-clear optional Setting this object clears all the entries in the error log
sub-tree | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 |
| job-output-auto-continue-timeout optional Returns or sets the time that the printer will wait after an
output bin becomes full and the printer is trying to deliver a
sheet of media to that output bin. When the timeout exp… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 |
| collated-originals-support optional Indicates that the printer can create multiple, collated
'originals' of a job and shows the level of support for this
capability. \\
cCollatedOriginals - The printer can crea… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 |
| on-off-line optional To bring the PDL processing sub-system on or off line. If the
device is a printer, then the printer does not process print
job data when the printer is off line. PML communication… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 |
| localization-languages-supported optional The list of languages supported by the device. The languages
are primarily, but not limited to, two character codes from ISO
639, each separated by a comma character. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 |
| localization-countries-supported optional The list of countries supported by the device. The countries
are primarily, but not limited to, two character codes from ISO
3166, each separated by a comma character. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 |
| host-application-available-memory optional Returns the amount of memory, in bytes, that the device has
available for job-related processing or resources. Also known
as driver work space (DWS) memory. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 |
| control-panel-display | node | - | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 |
| control-panel-key-press optional Writing this object simulates pressing a key on the control panel. Reading it will return the last key pressed either on the control panel or via PML. This object obsoletes/replac… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.66 |
| auto-continue optional Indicates if the device will automatically continue after
encountering a continuable error. If AUTO-CONTINUE is set to
eOn, the device will automatically generate continue event t… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 |
| install-date optional Identifies the date that the device was installed. The format
of the string is 'YYYYMMDDHHmmZ'. Where: \\
YYYY is the year. \\
MM is the month (1-12). \\
DD is the … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 |
| rtc-time-zone optional Controls the time zone, which can be chosen from a list of time
zones similar to the one used by Microsoft Windows operating
system: eTzDateline -12:00 International Date Line Wes… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 |