interfacePoeBudget

FS-SWITCH-MIB · .1.3.6.1.4.1.27975.42.1.1.20
MIB view Table view

Object

column r/w Integer32 
Set PoE port max consumption limitation (milli-watt).

Context

MIB
FS-SWITCH-MIB
OID
.1.3.6.1.4.1.27975.42.1.1.20
Type
column
Access
readwrite
Status
current
Parent
interfaceEntry
Table
interfaceTable
Siblings
26

Syntax

Integer32

Values & Constraints

Object Constraints
range: 30-600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
interfaceIndex
Interface index. physical interface:0x1~0x3FF, agg interface: 0x400~0x7FF, vlan interface:0x1000~0x1FFF, lookback interface:0x3000~0x3FFF
columnInteger32.1.3.6.1.4.1.27975.42.1.1.1
interfaceArpRetryInterval
Set arp request retry delay value to interface. Interval range 0~3.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.10
interfaceArpTimeout
Set arp age timeout value to interface. Timeout range 1~2147483.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.11
interfaceArpClear
Clear arp cache.0:no use, 1:clear arp.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.12
interfacejumboFrameEnable
Jumbo frame. 1:enabel, 2:disable
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.13
interfaceClearIPv4Addr
Clear the IPv4 address of the interface including secondary IPv4 address.0:no use, 1:clear IPv4 address.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.14
interfaceBandwidth
Set bandwidth informational parameter(bandwidth in kilobits). Use 0 to set default value. The default value of 10M port is 10000. The default value of 100M port is 100000. The def…
columnInteger32.1.3.6.1.4.1.27975.42.1.1.15
interfacePortIsolateGroupID
Set the isolate group of a interface. isolate group id range is 1 ~ 31. and 255(0xFF) mean delete group.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.16
interfaceArpProxy
Enable or disable arp proxy feature.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.17
interfaceLocalArpProxy
Enable or disable local arp proxy feature.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.18
interfacePoeAdmin
Set PoE port admin.The meanings of the values are: enable(1) - Enable port PoE; disable(2) - Disable port PoE; force-power(3) - Force to power on port PoE;
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.19
interfaceName
Interface name.
columnOctetString.1.3.6.1.4.1.27975.42.1.1.2
interfacePoePriority
Set PoE port priority level. The meanings of the value are: low(1) - Low priority; high(2) - High priority; critical(3) - critical priority;
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.21
interfaceLoadInterval
Specify interval for interface speed calculation. Load-interval must be in increments of 30 seconds. The load-interval ranges from 30 to 600 and default value is 300.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.22
interfaceMtu
Set MTU of the interface.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.23
interfaceIpUrpf
Set IP Unicast reverse-path of the interface.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.24
interfaceIpv6Urpf
Set IPv6 Unicast reverse-path of the interface.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.25
interfaceIpv6DadAttempt
Set IPv6 Duplicate address detection attempts number.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.26
interfaceNDClear
Clear arp cache.0:no use, 1:clear ND.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.27
interfaceType
The interface type.1:switch 2:route.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.3
interfaceIPv4Addr
IP addresses with mask , such as 123.123.123.123/24 .
columnOctetString.1.3.6.1.4.1.27975.42.1.1.4
interfaceDesc
Interface specific description.
columnOctetString.1.3.6.1.4.1.27975.42.1.1.5
interfaceMediaType
Specifies the port media type.0:auto-select 1:rj45 2:sfp.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.6
interfaceSpeed
Specifies the port speed.0:auto 1:10 2:100 3:1000 4:10000 5:40000 6:100000 7:2500 8:5000.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.7
interfaceDuplex
Specifies the port duplexStatus .0:auto 1:half 2:full.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.8
interfaceResetCnt
Reset interface counters; 0: noUse, 1: resetCount.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.9