interfacePoeAdmin
FS-SWITCH-MIB ·
.1.3.6.1.4.1.27975.42.1.1.19
Object
column
r/w
Enumeration
Set PoE port admin.The meanings of the values are: enable(1) - Enable port PoE; disable(2) - Disable port PoE; force-power(3) - Force to power on port PoE;
Context
- MIB
- FS-SWITCH-MIB
- OID
.1.3.6.1.4.1.27975.42.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- interfaceEntry
- Table
- interfaceTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | low |
2 | high |
3 | critical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| interfaceIndex Interface index. physical interface:0x1~0x3FF,
agg interface: 0x400~0x7FF, vlan interface:0x1000~0x1FFF,
lookback interface:0x3000~0x3FFF | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.1 |
| interfaceArpRetryInterval Set arp request retry delay value to interface. Interval range 0~3. | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.10 |
| interfaceArpTimeout Set arp age timeout value to interface. Timeout range 1~2147483. | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.11 |
| interfaceArpClear Clear arp cache.0:no use, 1:clear arp. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.12 |
| interfacejumboFrameEnable Jumbo frame. 1:enabel, 2:disable | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.13 |
| interfaceClearIPv4Addr Clear the IPv4 address of the interface including secondary IPv4 address.0:no use, 1:clear IPv4 address. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.14 |
| interfaceBandwidth Set bandwidth informational parameter(bandwidth in kilobits). Use 0 to set default value.
The default value of 10M port is 10000.
The default value of 100M port is 100000.
The def… | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.15 |
| interfacePortIsolateGroupID Set the isolate group of a interface. isolate group id range is 1 ~ 31. and 255(0xFF) mean delete group. | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.16 |
| interfaceArpProxy Enable or disable arp proxy feature. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.17 |
| interfaceLocalArpProxy Enable or disable local arp proxy feature. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.18 |
| interfaceName Interface name. | column | OctetString | .1.3.6.1.4.1.27975.42.1.1.2 |
| interfacePoeBudget Set PoE port max consumption limitation (milli-watt). | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.20 |
| interfacePoePriority Set PoE port priority level. The meanings of the value are:
low(1) - Low priority;
high(2) - High priority;
critical(3) - critical priority; | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.21 |
| interfaceLoadInterval Specify interval for interface speed calculation.
Load-interval must be in increments of 30 seconds.
The load-interval ranges from 30 to 600 and default
value is 300. | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.22 |
| interfaceMtu Set MTU of the interface. | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.23 |
| interfaceIpUrpf Set IP Unicast reverse-path of the interface. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.24 |
| interfaceIpv6Urpf Set IPv6 Unicast reverse-path of the interface. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.25 |
| interfaceIpv6DadAttempt Set IPv6 Duplicate address detection attempts number. | column | Integer32 | .1.3.6.1.4.1.27975.42.1.1.26 |
| interfaceNDClear Clear arp cache.0:no use, 1:clear ND. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.27 |
| interfaceType The interface type.1:switch 2:route. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.3 |
| interfaceIPv4Addr IP addresses with mask , such as 123.123.123.123/24 . | column | OctetString | .1.3.6.1.4.1.27975.42.1.1.4 |
| interfaceDesc Interface specific description. | column | OctetString | .1.3.6.1.4.1.27975.42.1.1.5 |
| interfaceMediaType Specifies the port media type.0:auto-select 1:rj45 2:sfp. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.6 |
| interfaceSpeed Specifies the port speed.0:auto 1:10 2:100 3:1000 4:10000 5:40000 6:100000 7:2500 8:5000. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.7 |
| interfaceDuplex Specifies the port duplexStatus .0:auto 1:half 2:full. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.8 |
| interfaceResetCnt Reset interface counters; 0: noUse, 1: resetCount. | column | Enumeration | .1.3.6.1.4.1.27975.42.1.1.9 |