interfaceLocalArpProxy

FS-SWITCH-MIB · .1.3.6.1.4.1.27975.42.1.1.18
MIB view Table view

Object

column r/w Enumeration 
Enable or disable local arp proxy feature.

Context

MIB
FS-SWITCH-MIB
OID
.1.3.6.1.4.1.27975.42.1.1.18
Type
column
Access
readwrite
Status
current
Parent
interfaceEntry
Table
interfaceTable
Siblings
26

Syntax

Enumeration

Values & Constraints

Object Constraints
range: 0-30000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
interfaceIndex
Interface index. physical interface:0x1~0x3FF, agg interface: 0x400~0x7FF, vlan interface:0x1000~0x1FFF, lookback interface:0x3000~0x3FFF
columnInteger32.1.3.6.1.4.1.27975.42.1.1.1
interfaceArpRetryInterval
Set arp request retry delay value to interface. Interval range 0~3.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.10
interfaceArpTimeout
Set arp age timeout value to interface. Timeout range 1~2147483.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.11
interfaceArpClear
Clear arp cache.0:no use, 1:clear arp.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.12
interfacejumboFrameEnable
Jumbo frame. 1:enabel, 2:disable
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.13
interfaceClearIPv4Addr
Clear the IPv4 address of the interface including secondary IPv4 address.0:no use, 1:clear IPv4 address.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.14
interfaceBandwidth
Set bandwidth informational parameter(bandwidth in kilobits). Use 0 to set default value. The default value of 10M port is 10000. The default value of 100M port is 100000. The def…
columnInteger32.1.3.6.1.4.1.27975.42.1.1.15
interfacePortIsolateGroupID
Set the isolate group of a interface. isolate group id range is 1 ~ 31. and 255(0xFF) mean delete group.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.16
interfaceArpProxy
Enable or disable arp proxy feature.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.17
interfacePoeAdmin
Set PoE port admin.The meanings of the values are: enable(1) - Enable port PoE; disable(2) - Disable port PoE; force-power(3) - Force to power on port PoE;
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.19
interfaceName
Interface name.
columnOctetString.1.3.6.1.4.1.27975.42.1.1.2
interfacePoeBudget
Set PoE port max consumption limitation (milli-watt).
columnInteger32.1.3.6.1.4.1.27975.42.1.1.20
interfacePoePriority
Set PoE port priority level. The meanings of the value are: low(1) - Low priority; high(2) - High priority; critical(3) - critical priority;
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.21
interfaceLoadInterval
Specify interval for interface speed calculation. Load-interval must be in increments of 30 seconds. The load-interval ranges from 30 to 600 and default value is 300.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.22
interfaceMtu
Set MTU of the interface.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.23
interfaceIpUrpf
Set IP Unicast reverse-path of the interface.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.24
interfaceIpv6Urpf
Set IPv6 Unicast reverse-path of the interface.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.25
interfaceIpv6DadAttempt
Set IPv6 Duplicate address detection attempts number.
columnInteger32.1.3.6.1.4.1.27975.42.1.1.26
interfaceNDClear
Clear arp cache.0:no use, 1:clear ND.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.27
interfaceType
The interface type.1:switch 2:route.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.3
interfaceIPv4Addr
IP addresses with mask , such as 123.123.123.123/24 .
columnOctetString.1.3.6.1.4.1.27975.42.1.1.4
interfaceDesc
Interface specific description.
columnOctetString.1.3.6.1.4.1.27975.42.1.1.5
interfaceMediaType
Specifies the port media type.0:auto-select 1:rj45 2:sfp.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.6
interfaceSpeed
Specifies the port speed.0:auto 1:10 2:100 3:1000 4:10000 5:40000 6:100000 7:2500 8:5000.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.7
interfaceDuplex
Specifies the port duplexStatus .0:auto 1:half 2:full.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.8
interfaceResetCnt
Reset interface counters; 0: noUse, 1: resetCount.
columnEnumeration.1.3.6.1.4.1.27975.42.1.1.9