mfrBundleTimerHello
FR-MFR-MIB ·
.1.3.6.1.2.1.10.47.2.3.1.7
Object
column
r/w
Seconds Integer32
The configured MFR Hello Timer value.
Context
- MIB
- FR-MFR-MIB
- OID
.1.3.6.1.2.1.10.47.2.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- Seconds
- Parent
- mfrBundleEntry
- Table
- mfrBundleTable
- Siblings
- 18
Syntax
Seconds Integer32
Values & Constraints
Object Constraints
range: 1-180
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mfrBundleIndex The index into the table. While this corresponds
to an entry in the ifTable, the value of mfrBundleIndex
need not match that of the ifIndex in the ifTable.
A manager can use mfrB… | column | Integer32 | .1.3.6.1.2.1.10.47.2.3.1.1 |
| mfrBundleActivationClass Controls the conditions under which the bundle is activated.
The following settings are available:
mfrBundleActivationClassA(1) - at least one must link up
mf… | column | Enumeration | .1.3.6.1.2.1.10.47.2.3.1.10 |
| mfrBundleThreshold Specifies the number of links that must be in operational
'up' state before the bundle will transition to an
operational up/active state. If the number of
operational 'up' links … | column | Bundle Links Integer32 | .1.3.6.1.2.1.10.47.2.3.1.11 |
| mfrBundleMaxDiffDelay The maximum delay difference between the bundle
links.
A value of -1 indicates that this object does not contain
a valid value | column | Milliseconds Integer32 | .1.3.6.1.2.1.10.47.2.3.1.12 |
| mfrBundleSeqNumSize Controls whether the standard FRF.12 12-bit
sequence number is used or the optional 24-bit
sequence number. | column | Enumeration | .1.3.6.1.2.1.10.47.2.3.1.13 |
| mfrBundleMaxBundleLinks The maximum number of bundle links supported for
this bundle. | column | Bundle Links Integer32 | .1.3.6.1.2.1.10.47.2.3.1.14 |
| mfrBundleLinksConfigured The number of links configured for the bundle. | column | Bundle Links Integer32 | .1.3.6.1.2.1.10.47.2.3.1.15 |
| mfrBundleLinksActive The number of links that are active. | column | Bundle Links Integer32 | .1.3.6.1.2.1.10.47.2.3.1.16 |
| mfrBundleBandwidth The amount of available bandwidth on the bundle | column | Bits/Sec SNMPv2-SMIInteger32 | .1.3.6.1.2.1.10.47.2.3.1.17 |
| mfrBundleFarEndName Name of the bundle received from the far end. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.10.47.2.3.1.18 |
| mfrBundleResequencingErrors A count of the number of resequencing errors. Each event
may correspond to multiple lost frames. Example:
Say sequence number 56, 59 and 60 is received for DLCI 100.
It is decid… | column | Error Events SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.47.2.3.1.19 |
| mfrBundleIfIndex The value must match an entry in the interface
table whose ifType must be set to frf16MfrBundle(163).
For example: if the value of mfrBundleIfIndex is 10,
then a co… | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.10.47.2.3.1.2 |
| mfrBundleRowStatus The mfrBundleRowStatus object allows create, change,
and delete operations on bundle entries. | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.47.2.3.1.3 |
| mfrBundleNearEndName The configured name of the bundle. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.10.47.2.3.1.4 |
| mfrBundleFragmentation Controls whether the bundle performs/accepts
fragmentation and re-assembly. The possible
values are:
enable(1) - Bundle links will fragment frames
d… | column | Enumeration | .1.3.6.1.2.1.10.47.2.3.1.5 |
| mfrBundleMaxFragSize The maximum fragment size supported. Note that this
is only valid if mfrBundleFragmentation is set to enable(1).
Zero is not a valid fragment size.
… | column | Octets Integer32 | .1.3.6.1.2.1.10.47.2.3.1.6 |
| mfrBundleTimerAck The configured MFR T_ACK value. | column | Seconds Integer32 | .1.3.6.1.2.1.10.47.2.3.1.8 |
| mfrBundleCountMaxRetry The MFR N_MAX_RETRY value. | column | Integer32 | .1.3.6.1.2.1.10.47.2.3.1.9 |