mfrBundleIfIndex

FR-MFR-MIB · .1.3.6.1.2.1.10.47.2.3.1.2

MIB view Table view

Object

column IF-MIBInterfaceIndex

The value must match an entry in the interface
table whose ifType must be set to frf16MfrBundle(163).
              
For example: if the value of mfrBundleIfIndex is 10,
then a corresponding entry should be present in
              
the ifTable with an index of 10 and an ifType of 163.

Context

MIB: FR-MFR-MIB
OID: .1.3.6.1.2.1.10.47.2.3.1.2
Type: column
Access: readonly
Status: current
Parent: mfrBundleEntry
Table: mfrBundleTable
Siblings: 18

Syntax

IF-MIBInterfaceIndex

Source: IF-MIBInterfaceIndex
Base type: Integer32

Values & Constraints

Type Constraints

range: 1..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mfrBundleIndex The index into the table. While this corresponds to an entry in the ifTable, the value of mfrBundleIndex need not match that of the ifIndex in the ifTable. A manager can use mfrB…	column	Integer32	`.1.3.6.1.2.1.10.47.2.3.1.1`
mfrBundleActivationClass Controls the conditions under which the bundle is activated. The following settings are available: mfrBundleActivationClassA(1) - at least one must link up mf…	column	Enumeration	`.1.3.6.1.2.1.10.47.2.3.1.10`
mfrBundleThreshold Specifies the number of links that must be in operational 'up' state before the bundle will transition to an operational up/active state. If the number of operational 'up' links …	column	Bundle Links Integer32	`.1.3.6.1.2.1.10.47.2.3.1.11`
mfrBundleMaxDiffDelay The maximum delay difference between the bundle links. A value of -1 indicates that this object does not contain a valid value	column	Milliseconds Integer32	`.1.3.6.1.2.1.10.47.2.3.1.12`
mfrBundleSeqNumSize Controls whether the standard FRF.12 12-bit sequence number is used or the optional 24-bit sequence number.	column	Enumeration	`.1.3.6.1.2.1.10.47.2.3.1.13`
mfrBundleMaxBundleLinks The maximum number of bundle links supported for this bundle.	column	Bundle Links Integer32	`.1.3.6.1.2.1.10.47.2.3.1.14`
mfrBundleLinksConfigured The number of links configured for the bundle.	column	Bundle Links Integer32	`.1.3.6.1.2.1.10.47.2.3.1.15`
mfrBundleLinksActive The number of links that are active.	column	Bundle Links Integer32	`.1.3.6.1.2.1.10.47.2.3.1.16`
mfrBundleBandwidth The amount of available bandwidth on the bundle	column	Bits/Sec SNMPv2-SMIInteger32	`.1.3.6.1.2.1.10.47.2.3.1.17`
mfrBundleFarEndName Name of the bundle received from the far end.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.2.1.10.47.2.3.1.18`
mfrBundleResequencingErrors A count of the number of resequencing errors. Each event may correspond to multiple lost frames. Example: Say sequence number 56, 59 and 60 is received for DLCI 100. It is decid…	column	Error Events SNMPv2-SMICounter32	`.1.3.6.1.2.1.10.47.2.3.1.19`
mfrBundleRowStatus The mfrBundleRowStatus object allows create, change, and delete operations on bundle entries.	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.10.47.2.3.1.3`
mfrBundleNearEndName The configured name of the bundle.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.2.1.10.47.2.3.1.4`
mfrBundleFragmentation Controls whether the bundle performs/accepts fragmentation and re-assembly. The possible values are: enable(1) - Bundle links will fragment frames d…	column	Enumeration	`.1.3.6.1.2.1.10.47.2.3.1.5`
mfrBundleMaxFragSize The maximum fragment size supported. Note that this is only valid if mfrBundleFragmentation is set to enable(1). Zero is not a valid fragment size. …	column	Octets Integer32	`.1.3.6.1.2.1.10.47.2.3.1.6`
mfrBundleTimerHello The configured MFR Hello Timer value.	column	Seconds Integer32	`.1.3.6.1.2.1.10.47.2.3.1.7`
mfrBundleTimerAck The configured MFR T_ACK value.	column	Seconds Integer32	`.1.3.6.1.2.1.10.47.2.3.1.8`
mfrBundleCountMaxRetry The MFR N_MAX_RETRY value.	column	Integer32	`.1.3.6.1.2.1.10.47.2.3.1.9`