flWorkWlanIf1MachineAdmin

FL-MGD-INFRASTRUCT-MIB · .1.3.6.1.4.1.4346.11.11.22.20.1.16
MIB view Table view

Object

node

No description available.

Context

MIB
FL-MGD-INFRASTRUCT-MIB
OID
.1.3.6.1.4.1.4346.11.11.22.20.1.16
Type
node
Parent
flWorkWlanIf1Parameter
Siblings
15
Children
3

Syntax

No syntax metadata recorded.

Values & Constraints

Object Constraints
range: 1-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
flWorkWlanIf1ParamState
State of this interface. It may be enabled or disabled.
scalarEnabledDisabledStatus.1.3.6.1.4.1.4346.11.11.22.20.1.1
flWorkWlanIf1Fragmentation
Set fragmentation thresholds.
scalarInteger32.1.3.6.1.4.1.4346.11.11.22.20.1.10
flWorkWlanIf1RtsCts
Set RTS/CTS values.
scalarInteger32.1.3.6.1.4.1.4346.11.11.22.20.1.11
flWorkWlanIf1LongDistance
Set Parameters for long distance link (meter). This Parameter must be equal at master and station. Normal mode: 3000 meters.
scalarInteger32.1.3.6.1.4.1.4346.11.11.22.20.1.12
flWorkWlanIf1ScbMacAddress
Mac address of the Device in SCB Mode.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.4346.11.11.22.20.1.13
flWorkWlanIf1ScbManMacMode
Mac-Address assignment method in SCB Mode disable(0) = Automatic mode. The device adopts the Mac-Address from the connected ethernet device. enable(1) = Manual mode. Mac-Address…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.22.20.1.14
flWorkWlanIf1IAPP
802.11f Inter Accesspoint Protocol (IAPP) disable(0) = IAPP disabled enable(1) = IAPP enabled
scalarEnumeration.1.3.6.1.4.1.4346.11.11.22.20.1.15
flWorkWlanIf1ParamOpMode
This textual convention is used to distinguish the WIFI operation mode of a device. station: 0 access point (master): 1 single client bridge (scb): 2 multi client bridge (mcb): 3 …
scalarOpModeType.1.3.6.1.4.1.4346.11.11.22.20.1.2
flWorkWlanIf1ParamSSID
SSID (Service Set Identifier) for this interface. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?{}[]+*~#-_.:,;<>' are allowe…
scalarOctetString.1.3.6.1.4.1.4346.11.11.22.20.1.3
flWorkWlanIf1ParamMode
Operation mode of this interface. 1=802.11a, 2=802.11b. 3=802.11b/g, 4=802.11a/n and 5=802.11g/n for master only.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.22.20.1.4
flWorkWlanIf1ParamChannel
Channel of this interface. This depends on your regional limitations and selected wlanMode. -2.4GHz Band ------ Auto (0) Channel-1 (1) Channel-2 (2) Channel…
scalarInteger32.1.3.6.1.4.1.4346.11.11.22.20.1.5
flWorkWlanIf1ParamOutdoor
If this interface is operating in 802.11a mode it must be distinguished between outdoor or indoor operation.
scalarEnabledDisabledStatus.1.3.6.1.4.1.4346.11.11.22.20.1.6
flWorkWlanIf1AntennaOutput
Mask for rx/tx-Antenna X5(1),X6(2),X7(4). e.g. Set (6) to enable x6 and x7 for rx and tx.
scalarInteger32.1.3.6.1.4.1.4346.11.11.22.20.1.7
flWorkWlanIf1OutputPower
Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations.
scalarInteger32.1.3.6.1.4.1.4346.11.11.22.20.1.8
flWorkWlanIf1STBC
Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.22.20.1.9
Child Objects
ObjectTypeSyntaxOID
flWorkWlanIf1MachineAdminSSID
SSID (Service Set Identifier) for the Machine Admin WLAN. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?{}[]+*~#-_.:,;<>' ar…
scalarOctetString.1.3.6.1.4.1.4346.11.11.22.20.1.16.1
flWorkWlanIf1MachineAdminPsk
Passphrase for the Machine Admin SSID. NOTE: You should use a randomly generated alphanumeric sequence (up to 63 at least 8 characters) for maximum security.
scalarOctetString.1.3.6.1.4.1.4346.11.11.22.20.1.16.2
flWorkWlanIf1MachineAdminIp
The IPv4 address of the device which should be accessible vie the Machine Admin SSID
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4346.11.11.22.20.1.16.3