flWorkRoutingOspfDefaultInfoOriginateMetric
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.23.5.5
Object
scalar
r/w
Integer32
Metric of the default route,which OSPF advertises when learned from other protocol.
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.23.5.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- flWorkRoutingOspf
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-16777214
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWorkRoutingOspfDefaultMetric Default metric of redistributed routes, when OSPF redistributes
from other protocols. | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.23.5.1 |
| flWorkRoutingOspfVirtIfTable Information about this router's virtual inter-
faces. Augments ospfVirtIfTable from the OSPF-MIB. | table | - | .1.3.6.1.4.1.4346.11.11.23.5.10 |
| flWorkRoutingOspfRFC1583CompatibilityMode From RFC2328:
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the prefer… | scalar | Enumeration | .1.3.6.1.4.1.4346.11.11.23.5.11 |
| flWorkRoutingOspfSpfDelayTime Delay time (in seconds) between when OSPF
receives a topology change and when it
starts an SPF calculation. It can be an
integer from 0 to 65535. The default
time is 5 seconds. A … | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.23.5.12 |
| flWorkRoutingOspfSpfHoldTime Minimum time (in seconds) between two
consecutive SPF calculations. It can
be an integer from 0 to 65535. The
default time is 10 seconds. A value
of 0 means that there is no delay… | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.23.5.13 |
| flWorkRoutingOspfAutoCostRefBw Auto cost refernece bandwidth of the
router interfaces for ospf metric calculations.
It can be an integer from 1 to 4294967. The
default reference bandwidth is 100 Mbps. | scalar | Unsigned32 | .1.3.6.1.4.1.4346.11.11.23.5.14 |
| flWorkRoutingOspfOpaqueLsaSupport The router's support for Opaque LSA types.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4346.11.11.23.5.15 |
| flWorkRoutingOspfAreaOpaqueLsdbTable The OSPF Process's Area Link State Database (LSDB).
The LSDB contains type-10 Link State Advertisements
from throughout the areas that the device is attached to. | table | - | .1.3.6.1.4.1.4346.11.11.23.5.16 |
| flWorkRoutingOspfLocalLsdbTable The OSPF Process's Link-Local Link State Database
for non-virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only Link-Local Link State
Adve… | table | - | .1.3.6.1.4.1.4346.11.11.23.5.17 |
| flWorkRoutingOspfAsLsdbTable The OSPF Process's AS-scope LSA Link State Database.
The Database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
… | table | - | .1.3.6.1.4.1.4346.11.11.23.5.18 |
| flWorkRoutingOspfDefaultPassiveMode Flag to determine, whether all the interfaces are passive interfaces
by default. A passive interface will not participate in the OSPF
adjacency formation. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4346.11.11.23.5.19 |
| flWorkRoutingOspfDefaultMetricConfigured Flag to determine whether OSPF default-metric is configured or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4346.11.11.23.5.2 |
| flWorkRoutingOspfDefaultInfoOriginate Flag to determine, whether OSPF can advertise a default-route learned
from another protocol. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4346.11.11.23.5.3 |
| flWorkRoutingOspfDefaultInfoOriginateAlways When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
router's forwarding table contains a def… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4346.11.11.23.5.4 |
| flWorkRoutingOspfDefaultInfoOriginateMetricConfigured Flag to determine whether OSPF default-info originate metric
is configured or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4346.11.11.23.5.6 |
| flWorkRoutingOspfDefaultInfoOriginateMetricType Metric Type of the default route,which OSPF advertises when learned from
other protocol. It can be 1(external type 1) or 2(external type 2). | scalar | Enumeration | .1.3.6.1.4.1.4346.11.11.23.5.7 |
| flWorkRoutingOspfRouteRedistTable This table contains the MIB objects required to configure
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,… | table | - | .1.3.6.1.4.1.4346.11.11.23.5.8 |
| flWorkRoutingOspfIfTable The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. Augments
ospfIfTable from the OSPF-MIB. | table | - | .1.3.6.1.4.1.4346.11.11.23.5.9 |