flWorkRoutingOspfAutoCostRefBw

FL-MGD-INFRASTRUCT-MIB · .1.3.6.1.4.1.4346.11.11.23.5.14
MIB view Table view

Object

scalar r/w Unsigned32 
Auto cost refernece bandwidth of the 
router interfaces for ospf metric calculations.
It can be an integer from 1 to 4294967. The
default reference bandwidth is 100 Mbps.

Context

MIB
FL-MGD-INFRASTRUCT-MIB
OID
.1.3.6.1.4.1.4346.11.11.23.5.14
Type
scalar
Access
readwrite
Status
current
Parent
flWorkRoutingOspf
Siblings
18

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 1-4294967

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
flWorkRoutingOspfDefaultMetric
Default metric of redistributed routes, when OSPF redistributes from other protocols.
scalarInteger32.1.3.6.1.4.1.4346.11.11.23.5.1
flWorkRoutingOspfVirtIfTable
Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
table-.1.3.6.1.4.1.4346.11.11.23.5.10
flWorkRoutingOspfRFC1583CompatibilityMode
From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the prefer…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.23.5.11
flWorkRoutingOspfSpfDelayTime
Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A …
scalarInteger32.1.3.6.1.4.1.4346.11.11.23.5.12
flWorkRoutingOspfSpfHoldTime
Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay…
scalarInteger32.1.3.6.1.4.1.4346.11.11.23.5.13
flWorkRoutingOspfOpaqueLsaSupport
The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4346.11.11.23.5.15
flWorkRoutingOspfAreaOpaqueLsdbTable
The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.
table-.1.3.6.1.4.1.4346.11.11.23.5.16
flWorkRoutingOspfLocalLsdbTable
The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Adve…
table-.1.3.6.1.4.1.4346.11.11.23.5.17
flWorkRoutingOspfAsLsdbTable
The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. …
table-.1.3.6.1.4.1.4346.11.11.23.5.18
flWorkRoutingOspfDefaultPassiveMode
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4346.11.11.23.5.19
flWorkRoutingOspfDefaultMetricConfigured
Flag to determine whether OSPF default-metric is configured or not.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4346.11.11.23.5.2
flWorkRoutingOspfDefaultInfoOriginate
Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4346.11.11.23.5.3
flWorkRoutingOspfDefaultInfoOriginateAlways
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a def…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4346.11.11.23.5.4
flWorkRoutingOspfDefaultInfoOriginateMetric
Metric of the default route,which OSPF advertises when learned from other protocol.
scalarInteger32.1.3.6.1.4.1.4346.11.11.23.5.5
flWorkRoutingOspfDefaultInfoOriginateMetricConfigured
Flag to determine whether OSPF default-info originate metric is configured or not.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4346.11.11.23.5.6
flWorkRoutingOspfDefaultInfoOriginateMetricType
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
scalarEnumeration.1.3.6.1.4.1.4346.11.11.23.5.7
flWorkRoutingOspfRouteRedistTable
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP,…
table-.1.3.6.1.4.1.4346.11.11.23.5.8
flWorkRoutingOspfIfTable
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
table-.1.3.6.1.4.1.4346.11.11.23.5.9