flWorkRoutingOspfAsLsdbTable

FL-MGD-INFRASTRUCT-MIB · .1.3.6.1.4.1.4346.11.11.23.5.18

Object

table

The OSPF Process's AS-scope LSA Link State Database. 
The Database contains the AS-scope Link State 
Advertisements from throughout the areas that 
the device is attached to. 
          
This table is identical to the OSPF LSDB Table 
in format, but contains only AS-scope Link State 
Advertisements.  The purpose is to allow AS-scope 
LSAs to be displayed once for the router rather 
than once in each non-stub area.

Context

MIB: FL-MGD-INFRASTRUCT-MIB
OID: .1.3.6.1.4.1.4346.11.11.23.5.18
Type: table
Status: current
Parent: flWorkRoutingOspf
Siblings: 18
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
flWorkRoutingOspfDefaultMetric Default metric of redistributed routes, when OSPF redistributes from other protocols.	scalar	Integer32	`.1.3.6.1.4.1.4346.11.11.23.5.1`
flWorkRoutingOspfVirtIfTable Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.4346.11.11.23.5.10`
flWorkRoutingOspfRFC1583CompatibilityMode From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the prefer…	scalar	Enumeration	`.1.3.6.1.4.1.4346.11.11.23.5.11`
flWorkRoutingOspfSpfDelayTime Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A …	scalar	Integer32	`.1.3.6.1.4.1.4346.11.11.23.5.12`
flWorkRoutingOspfSpfHoldTime Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay…	scalar	Integer32	`.1.3.6.1.4.1.4346.11.11.23.5.13`
flWorkRoutingOspfAutoCostRefBw Auto cost refernece bandwidth of the router interfaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.	scalar	Unsigned32	`.1.3.6.1.4.1.4346.11.11.23.5.14`
flWorkRoutingOspfOpaqueLsaSupport The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4346.11.11.23.5.15`
flWorkRoutingOspfAreaOpaqueLsdbTable The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.	table	-	`.1.3.6.1.4.1.4346.11.11.23.5.16`
flWorkRoutingOspfLocalLsdbTable The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Adve…	table	-	`.1.3.6.1.4.1.4346.11.11.23.5.17`
flWorkRoutingOspfDefaultPassiveMode Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4346.11.11.23.5.19`
flWorkRoutingOspfDefaultMetricConfigured Flag to determine whether OSPF default-metric is configured or not.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4346.11.11.23.5.2`
flWorkRoutingOspfDefaultInfoOriginate Flag to determine, whether OSPF can advertise a default-route learned from another protocol.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4346.11.11.23.5.3`
flWorkRoutingOspfDefaultInfoOriginateAlways When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a def…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4346.11.11.23.5.4`
flWorkRoutingOspfDefaultInfoOriginateMetric Metric of the default route,which OSPF advertises when learned from other protocol.	scalar	Integer32	`.1.3.6.1.4.1.4346.11.11.23.5.5`
flWorkRoutingOspfDefaultInfoOriginateMetricConfigured Flag to determine whether OSPF default-info originate metric is configured or not.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4346.11.11.23.5.6`
flWorkRoutingOspfDefaultInfoOriginateMetricType Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).	scalar	Enumeration	`.1.3.6.1.4.1.4346.11.11.23.5.7`
flWorkRoutingOspfRouteRedistTable This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP,…	table	-	`.1.3.6.1.4.1.4346.11.11.23.5.8`
flWorkRoutingOspfIfTable The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.4346.11.11.23.5.9`

Child Objects