eriAlarmActiveSeverity

ERICSSON-ALARM-MIB · .1.3.6.1.4.1.193.183.4.1.3.5.1.10
MIB view Table view

Object

column ITU-ALARM-TC-MIBItuPerceivedSeverity 
The severity of the alarm as defined by X.733.
Note that this may not be the original severity
since the alarm may have changed severity.

Context

MIB
ERICSSON-ALARM-MIB
OID
.1.3.6.1.4.1.193.183.4.1.3.5.1.10
Type
column
Access
readonly
Status
current
Parent
eriAlarmActiveAlarmEntry
Table
eriAlarmActiveAlarmTable
Siblings
13

Syntax

ITU-ALARM-TC-MIBItuPerceivedSeverity
Source
ITU-ALARM-TC-MIBItuPerceivedSeverity
Base type
Enumeration

Values & Constraints

Type Values
1cleared
2indeterminate
3critical
4major
5minor
6warning

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
eriAlarmActiveIndex
A unique value, greater than zero, for each alarm. It is recommended that values are assigned contiguously starting from 1. The value for each alarm must remain constant at least …
columnERICSSON-ALARM-TC-MIBEriAlarmIndex.1.3.6.1.4.1.193.183.4.1.3.5.1.1
eriAlarmActiveOriginalSeverity
The original severity as reported by the alarm raise notification.
columnITU-ALARM-TC-MIBItuPerceivedSeverity.1.3.6.1.4.1.193.183.4.1.3.5.1.11
eriAlarmActiveAdditionalText
A user friendly text describing the alarm. The text is both static depending on the alarm type (probable cause), and dynamic depending on managed object instance and other conditi…
columnERICSSON-ALARM-TC-MIBEriLargeAdditionalText.1.3.6.1.4.1.193.183.4.1.3.5.1.12
eriAlarmActiveOrigAdditionalText
A user-friendly text describing the alarm. The text is both static depending on the alarm type (probable cause), and dynamic depending on managed object and other conditions. This…
columnERICSSON-ALARM-TC-MIBEriLargeAdditionalText.1.3.6.1.4.1.193.183.4.1.3.5.1.13
eriAlarmActiveResourceId
In case the alarm refers to an object which is instrumented by SNMP this variable indicates the corresponding OID for the managed object.
columnALARM-MIBResourceId.1.3.6.1.4.1.193.183.4.1.3.5.1.14
eriAlarmActiveMajorType
In combination with eriAlarmActiveMinorType, this provides a unique identification of the fault type. Different managed object types and instances can share alarm types, but if th…
columnERICSSON-ALARM-TC-MIBEriAlarmType.1.3.6.1.4.1.193.183.4.1.3.5.1.2
eriAlarmActiveMinorType
In combination with with eriAlarmActiveMajorType, this provides a unique identification of the fault type, not including the managed object. Different managed object types and ins…
columnERICSSON-ALARM-TC-MIBEriAlarmType.1.3.6.1.4.1.193.183.4.1.3.5.1.3
eriAlarmActiveSpecificProblem
This is a clear-text unique identification of the alarm type. There is a one-to-one mapping between eriAlarmActiveSpecificProblem and [eriAlarmActiveMajorType,eriAlarmActiveMinorT…
columnERICSSON-ALARM-TC-MIBEriAlarmSpecificProblem.1.3.6.1.4.1.193.183.4.1.3.5.1.4
eriAlarmActiveManagedObject
The 3GPP naming convention shall be used as format for the managed object parameter. Note that the granularity must be good enough to guarantee unique alarm states and relevant re…
columnERICSSON-TC-MIBEriMO.1.3.6.1.4.1.193.183.4.1.3.5.1.5
eriAlarmActiveEventType
The event type as defined in X.733/X.736.
columnIANA-ITU-ALARM-TC-MIBIANAItuEventType.1.3.6.1.4.1.193.183.4.1.3.5.1.6
eriAlarmActiveEventTime
A time stamp of the alarm state change event. Note that this variable represents the last change of the alarm state, like changed severity or additional text. If the alarm has not…
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.193.183.4.1.3.5.1.7
eriAlarmActiveOriginalEventTime
The time-stamp of the original alarm raise notification. NOTE: All fields of the DateAndTime MUST be filled out, including the hours and minutes from UTC. As such, the value shoul…
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.193.183.4.1.3.5.1.8
eriAlarmActiveProbableCause
The probable cause for the alarm originally defined by X.733 and subsequent standards. See also the ERICSSON-ALARM-PC-MIB. Due to the history of problems in maintaining a standard…
columnERICSSON-ALARM-PC-MIBEriProbableCause.1.3.6.1.4.1.193.183.4.1.3.5.1.9