eriAlarmActiveMajorType
ERICSSON-ALARM-MIB ·
.1.3.6.1.4.1.193.183.4.1.3.5.1.2
Object
column
ERICSSON-ALARM-TC-MIBEriAlarmType
In combination with eriAlarmActiveMinorType, this provides a unique identification of the fault type. Different managed object types and instances can share alarm types, but if the same managed object reports the same alarm type, it is to be considered as the same alarm state. The alarm type is a simplification of the different X.733 and 3GPP alarm IRP alarm correlation mechanisms based on EventType, ProbableCause, SpecificProblem and NotificationId. For systems where eriAlarmActiveMajorType is not needed for identification purposes, it is not used and MUST be zero-valued.
Context
- MIB
- ERICSSON-ALARM-MIB
- OID
.1.3.6.1.4.1.193.183.4.1.3.5.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eriAlarmActiveAlarmEntry
- Table
- eriAlarmActiveAlarmTable
- Siblings
- 13
Syntax
ERICSSON-ALARM-TC-MIBEriAlarmType
- Source
- ERICSSON-ALARM-TC-MIBEriAlarmType
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eriAlarmActiveIndex A unique value, greater than zero, for each
alarm. It is recommended that values are
assigned contiguously starting from 1. The value
for each alarm must remain constant at least … | column | ERICSSON-ALARM-TC-MIBEriAlarmIndex | .1.3.6.1.4.1.193.183.4.1.3.5.1.1 |
| eriAlarmActiveSeverity The severity of the alarm as defined by X.733.
Note that this may not be the original severity
since the alarm may have changed severity. | column | ITU-ALARM-TC-MIBItuPerceivedSeverity | .1.3.6.1.4.1.193.183.4.1.3.5.1.10 |
| eriAlarmActiveOriginalSeverity The original severity as reported by the alarm
raise notification. | column | ITU-ALARM-TC-MIBItuPerceivedSeverity | .1.3.6.1.4.1.193.183.4.1.3.5.1.11 |
| eriAlarmActiveAdditionalText A user friendly text describing the alarm. The
text is both static depending on the alarm type
(probable cause), and dynamic depending on
managed object instance and other conditi… | column | ERICSSON-ALARM-TC-MIBEriLargeAdditionalText | .1.3.6.1.4.1.193.183.4.1.3.5.1.12 |
| eriAlarmActiveOrigAdditionalText A user-friendly text describing the alarm. The
text is both static depending on the alarm type
(probable cause), and dynamic depending on
managed object and other conditions. This… | column | ERICSSON-ALARM-TC-MIBEriLargeAdditionalText | .1.3.6.1.4.1.193.183.4.1.3.5.1.13 |
| eriAlarmActiveResourceId In case the alarm refers to an object which is
instrumented by SNMP this variable indicates the
corresponding OID for the managed object. | column | ALARM-MIBResourceId | .1.3.6.1.4.1.193.183.4.1.3.5.1.14 |
| eriAlarmActiveMinorType In combination with with
eriAlarmActiveMajorType, this provides a unique
identification of the fault type, not including
the managed object. Different managed object
types and ins… | column | ERICSSON-ALARM-TC-MIBEriAlarmType | .1.3.6.1.4.1.193.183.4.1.3.5.1.3 |
| eriAlarmActiveSpecificProblem This is a clear-text unique identification of
the alarm type. There is a one-to-one mapping
between eriAlarmActiveSpecificProblem and
[eriAlarmActiveMajorType,eriAlarmActiveMinorT… | column | ERICSSON-ALARM-TC-MIBEriAlarmSpecificProblem | .1.3.6.1.4.1.193.183.4.1.3.5.1.4 |
| eriAlarmActiveManagedObject The 3GPP naming convention shall be used as
format for the managed object parameter. Note
that the granularity must be good enough to
guarantee unique alarm states and relevant
re… | column | ERICSSON-TC-MIBEriMO | .1.3.6.1.4.1.193.183.4.1.3.5.1.5 |
| eriAlarmActiveEventType The event type as defined in X.733/X.736. | column | IANA-ITU-ALARM-TC-MIBIANAItuEventType | .1.3.6.1.4.1.193.183.4.1.3.5.1.6 |
| eriAlarmActiveEventTime A time stamp of the alarm state change event.
Note that this variable represents the last
change of the alarm state, like changed severity
or additional text. If the alarm has not… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.193.183.4.1.3.5.1.7 |
| eriAlarmActiveOriginalEventTime The time-stamp of the original alarm raise
notification.
NOTE: All fields of the DateAndTime MUST be
filled out, including the hours and minutes from
UTC. As such, the value shoul… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.193.183.4.1.3.5.1.8 |
| eriAlarmActiveProbableCause The probable cause for the alarm originally
defined by X.733 and subsequent standards. See
also the ERICSSON-ALARM-PC-MIB. Due to the
history of problems in maintaining a standard… | column | ERICSSON-ALARM-PC-MIBEriProbableCause | .1.3.6.1.4.1.193.183.4.1.3.5.1.9 |