upsESystemInputTable

EPPC-MIB · .1.3.6.1.4.1.935.10.1.1.2.16
MIB view Table view

Object

table mandatory 
A list of input table entries. The number of entries is given by the 
value of upsESystemInputNumPhase.

Context

MIB
EPPC-MIB
OID
.1.3.6.1.4.1.935.10.1.1.2.16
Type
table
Status
mandatory
Parent
upsESystemSummary
Siblings
21
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsESystemStatus mandatory
The indication of UPS system status.
scalarEnumeration.1.3.6.1.4.1.935.10.1.1.2.1
upsESystemConfigOutputPower mandatory
The magnitude of the nominal true power rating presented in W .
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.10
upsESystemConfigOutputLoadHighSetPoint mandatory
The maximum output load allowed before the load is too high for UPS operation
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.11
upsESystemConfigOverTemperatureSetPoint mandatory
The maximum temperature allowed before the UPS operation temperature is too high, presented in 0.1 degree.
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.12
upsESystemInputSourceNum mandatory
The present external source of input power.
scalarInteger32.1.3.6.1.4.1.935.10.1.1.2.13
upsESystemInputLineBads mandatory
The number of times the Input was out of tolerance in voltage or frequency. Its value should be initialized 0 after agent restarting.
scalarRFC1155-SMICounter.1.3.6.1.4.1.935.10.1.1.2.14
upsESystemInputNumPhases mandatory
The number of input phase utilized is this device, serves as the table index. This value indicate the device initialized feature.
scalarInteger32.1.3.6.1.4.1.935.10.1.1.2.15
upsESystemOutputNumPhase mandatory
The number of metered output phases, serves as the table index. This value indicate the device initialized feature.
scalarInteger32.1.3.6.1.4.1.935.10.1.1.2.17
upsESystemOutputTable mandatory
A list of output table entries. The number of entries is given by the value of upsESystemOutputNumPhase.
table-.1.3.6.1.4.1.935.10.1.1.2.18
upsESystemBypassNumPhase mandatory
The number of bypass phases, serves as the table index. This value indicate the device initialized feature
scalarInteger32.1.3.6.1.4.1.935.10.1.1.2.19
upsESystemTemperature mandatory
The temperature of UPS presented in 0.1 degree.
scalarInteger32.1.3.6.1.4.1.935.10.1.1.2.2
upsESystemBypassTable mandatory
A list of bypass table entries. The number of entries is given by the value of upsESystemBypassNumPhase.
table-.1.3.6.1.4.1.935.10.1.1.2.20
upsESystemConfigBelowCapacityLimit mandatory
The UPS batteries capacity(%) limit for shutdown
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.21
upsESystemConfigBelowRemainTimeLimit mandatory
The UPS batteries backup time(minute) limit for shutdown
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.22
upsESystemWarningCode mandatory
The warning code of UPS. Please refer the warning table of 'Q6' for details.
scalarOctetString.1.3.6.1.4.1.935.10.1.1.2.3
upsESystemFaultCode mandatory
The fault code of UPS.Please refer the fault code of 'Q6' for details.
scalarOctetString.1.3.6.1.4.1.935.10.1.1.2.4
upsESystemConfigInputVoltage mandatory
The magnitude of the nominal input voltage presented in 0.1 V. On those systems which support read-write access to this object, if there is an attempt to set this variable to a…
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.5
upsESystemConfigInputFrequence mandatory
The nominal input frequency presented in 0.1 Hz. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is …
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.6
upsESystemConfigOutputVoltage mandatory
The magnitude of the nominal output voltage presented in 0.1V. On those systems which support read-write access to this object, if there is an attempt to set this variable to a v…
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.7
upsESystemConfigOutputFrequency mandatory
The nominal output frequency presented in 0.1Hz. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is …
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.8
upsESystemConfigOutputVA mandatory
The magnitude of the nominal Volt-Amp rating presented in VA.
scalarUPS-MIBNonNegativeInteger.1.3.6.1.4.1.935.10.1.1.2.9
Child Objects
ObjectTypeSyntaxOID
upsESystemInputEntry mandatory
An entry containing information applicable to a particular input line.
row-.1.3.6.1.4.1.935.10.1.1.2.16.1