outletControlRebootCmd
EATON-EPDU-MIB ·
.1.3.6.1.4.1.534.6.6.7.6.6.1.5
Object
column
r/w
Integer32
Outlet control command.
For outlets that are On prior to this Reboot command, they will switch Off immediately when the command is
issued, remain Off for outletControlRebootOffTime seconds, and then turn back On.
For outlets that are Off prior to the Reboot command, they will turn On after a delay of outletControlRebootOffTime
seconds from when the command is issued.
0-n : Time in seconds until the Reboot command is issued
-1 : Cancel a pending outlet Reboot command
When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command.
Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control
commands. These will respond with an error if a command value of > 0 is written to this object.
Context
- MIB
- EATON-EPDU-MIB
- OID
.1.3.6.1.4.1.534.6.6.7.6.6.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- outletControlEntry
- Table
- outletControlTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-99999
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| outletControlShutoffDelay Time delay in seconds that could be taken in account before shutting of the outlet.
An application which need to shutoff properly an outlet will read this parameter first
then wri… | column | Integer32 | .1.3.6.1.4.1.534.6.6.7.6.6.1.10 |
| outletControlStatus Current state of a controlled outlet. | column | Enumeration | .1.3.6.1.4.1.534.6.6.7.6.6.1.2 |
| outletControlOffCmd Outlet control command.
Once the command is issued, the outlet will turn Off immediately.
0-n : Time in seconds until the outlet command is issued
-1 : Cancel a pen… | column | Integer32 | .1.3.6.1.4.1.534.6.6.7.6.6.1.3 |
| outletControlOnCmd Outlet control command.
Once the command is issued, the outlet will turn On immediately.
0-n : Time in seconds until the outlet command is issued
-1 : Cancel a pend… | column | Integer32 | .1.3.6.1.4.1.534.6.6.7.6.6.1.4 |
| outletControlPowerOnState Determines the outlet state when power is applied to the unit.
0 : not restart at device startup
1 : should sequence back ON in line with outletControlSequenceTime
2 : should take… | column | Enumeration | .1.3.6.1.4.1.534.6.6.7.6.6.1.6 |
| outletControlSequenceDelay Time delay in seconds from when a Global Sequence On command is issued to
when the command is executed on this outlet. This delay is also used as a power-on
delay. Set to -1 to e… | column | Integer32 | .1.3.6.1.4.1.534.6.6.7.6.6.1.7 |
| outletControlRebootOffTime Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command. | column | Integer32 | .1.3.6.1.4.1.534.6.6.7.6.6.1.8 |
| outletControlSwitchable Determines the outlet capability to be controlled On/Off from the communication channels.
1 : control On/Off enabled
2 : control On/Off disabled. | column | Enumeration | .1.3.6.1.4.1.534.6.6.7.6.6.1.9 |