swL2IGMPSnoopingLastMemberQueryInterval
DES6500-SWL2MGMT-MIB ·
.1.3.6.1.4.1.171.11.78.1.2.11.3.1.5
Object
column
r/w
Integer32
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
Context
- MIB
- DES6500-SWL2MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.78.1.2.11.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swL2IGMPSnoopingCtrlEntry
- Table
- swL2IGMPSnoopingCtrlTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-25
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2IGMPSnoopingCtrlVid This object indicates the IGMP control entry's VLAN id. If VLAN
is disabled, the Vid is always 0 and cannot be changed by
management users. If VLAN is in Port-Base mode, the Vid i… | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.1 |
| swL2IGMPSnoopingCurrentState This object indicates the current IGMP query state. | column | Enumeration | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.10 |
| swL2IGMPSnoopingCtrlState This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from ea… | column | Enumeration | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.11 |
| swL2IGMPSnoopingQueryInterval The frequency at which IGMP Host-Query packets are
transmitted on this switch. | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.2 |
| swL2IGMPSnoopingMaxResponseTime The maximum query response time on this switch. | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.3 |
| swL2IGMPSnoopingRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (R… | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.4 |
| swL2IGMPSnoopingHostTimeout The timer value for sending IGMP query packet when none was
sent by the host in the LAN. The timer works in per-VLAN basis.
Our device will be activated to send the query message… | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.6 |
| swL2IGMPSnoopingRouteTimeout The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages. | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.7 |
| swL2IGMPSnoopingLeaveTimer When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group … | column | Integer32 | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.8 |
| swL2IGMPSnoopingQueryState This object decide the IGMP query enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.171.11.78.1.2.11.3.1.9 |