swL2IGMPSnoopingCtrlEntry

DES6500-SWL2MGMT-MIB · .1.3.6.1.4.1.171.11.78.1.2.11.3.1

MIB view Table view

Object

row

The entry in IGMP control table (swL2IGMPSnoopingCtrlTable). The entry
is effective only when IGMP capture switch 
(swL2DevCtrlIGMPSnooping) is enabled.

Context

MIB: DES6500-SWL2MGMT-MIB
OID: .1.3.6.1.4.1.171.11.78.1.2.11.3.1
Type: row
Status: current
Parent: swL2IGMPSnoopingCtrlTable
Table: swL2IGMPSnoopingCtrlTable
Children: 11

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
swL2IGMPSnoopingCtrlVid This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid i…	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.1`
swL2IGMPSnoopingCurrentState This object indicates the current IGMP query state.	column	Enumeration	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.10`
swL2IGMPSnoopingCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from ea…	column	Enumeration	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.11`
swL2IGMPSnoopingQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this switch.	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.2`
swL2IGMPSnoopingMaxResponseTime The maximum query response time on this switch.	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.3`
swL2IGMPSnoopingRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (R…	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.4`
swL2IGMPSnoopingLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group…	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.5`
swL2IGMPSnoopingHostTimeout The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message…	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.6`
swL2IGMPSnoopingRouteTimeout The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.7`
swL2IGMPSnoopingLeaveTimer When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group …	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.8`
swL2IGMPSnoopingQueryState This object decide the IGMP query enabled or disabled.	column	Enumeration	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.9`

Indexes

Object	Type	Syntax	OID
swL2IGMPSnoopingCtrlVid This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid i…	column	Integer32	`.1.3.6.1.4.1.171.11.78.1.2.11.3.1.1`