vpwsConfigOperStatus
DC-VPWS-MIB ·
.1.3.6.1.4.1.629.10.19.1.1.1.5
Object
column
DC-MASTER-TCNpgOperStatus
The current operational state of this VPWS instance.
If the operational status is 'up' then the VPWS is
programmed in the data plane.
Context
- MIB
- DC-VPWS-MIB
- OID
.1.3.6.1.4.1.629.10.19.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vpwsConfigEntry
- Table
- vpwsConfigTable
- Siblings
- 19
Syntax
DC-MASTER-TCNpgOperStatus
- Source
- DC-MASTER-TCNpgOperStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | operStatusUp |
2 | operStatusDown |
3 | operStatusGoingUp |
4 | operStatusGoingDown |
5 | operStatusActFailed |
8 | operStatusFailed |
10 | operStatusFailedPerm |
11 | operStatusFailing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vpwsConfigPwEncapType The MPLS pseudowire encapsulation type used by this VPWS.
If vpwsConfigADType is set to 'bgp', this field must be
set to 'Ethernet' or 'Tagged Ethernet'.
… | column | IANA-PWE3-MIBIANAPwTypeTC | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.10 |
| vpwsConfigMtu The layer 2 MTU of this VPWS.
When using auto-discovery and signaling, this specifies
the signaled layer 2 MTU.
Changing this value will cause an int… | column | Unsigned32 | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.11 |
| vpwsConfigControlWord Whether or not the pseudowires use a PW control word.
Changing this value will cause an interruption to data
flow for this VPWS. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.12 |
| vpwsConfigSeqDelivery Whether or not the pseudowires must provide sequenced
delivery of traffic.
Changing this value will cause an interruption to data
flow for this VPWS. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.13 |
| vpwsConfigRouteDistinguisher The route distinguisher for this VPWS. See [RFC4364] for
a complete definition of a route distinguisher.
This is only used if BGP auto-discovery is enabled
(vpwsCo… | column | DC-L2VPN-MIBBgpRouteDistinguisher | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.14 |
| vpwsConfigVpnId The VPN ID to advertise as a BGP extended community, or
zero if none.
If the VPWS uses BGP auto-discovery and LDP signaling
(vpwsConfigADType = bgp and vpwsConfigSi… | column | DC-L2VPN-MIBBgpExtendedCommunity | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.15 |
| vpwsConfigLocalSiteID The local VPWS site ID, or zero if not specified.
This is only used if BGP auto-discovery is enabled
(vpwsConfigADType = bgp). It can be used with BGP or LDP
signa… | column | DC-L2VPN-MIBL2vpnVeIdOrZero | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.16 |
| vpwsConfigLocalPreference The preference that the local PE router is the designated
forwarder for this VPWS. High values are preferred to low
values.
This is only used if BGP auto-discovery… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.17 |
| vpwsConfigLabelBlockSize The size of the label blocks for this VPWS.
This is only used when using BGP auto-discovery with BGP
signaling (vpwsConfigADType = bgp and
vpwsConfigSigType = bgp).… | column | Unsigned32 | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.18 |
| vpwsConfigIncludeCSV Whether or not the BGP NLRI for this VPWS will include a
Circuit Status Vector TLV.
This is only used when using BGP auto-discovery with BGP
signaling (vpwsConfigAD… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.19 |
| vpwsIndex Index identifying the VPWS instance. | column | DC-MASTER-TCNumericIndex | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.2 |
| vpwsConfigIgnoreMtuMismatch This field specifies whether mismatches of MTU size with
remote PE routers should be ignored for this VPWS.
If this field is false, PWs will not be established to
r… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.20 |
| vpwsConfigIgnoreEncapsMismatch This field specifies whether mismatches of encapsulation
type with remote PE routers should be ignored for this
VPWS.
If this field is false, PWs will not be establ… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.21 |
| vpwsConfigRowStatus The row status for this VPWS Configuration Table entry,
used to create and destroy table entries. | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.3 |
| vpwsConfigAdminStatus The administrative status of this VPWS instance, used to
activate and deactivate the VPWS instance. | column | DC-MASTER-TCAdminStatus | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.4 |
| vpwsConfigName A textual name of the VPWS instance. If there is no local
name, or this field is otherwise not applicable, then this
field MUST contain a zero-length octet string. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.6 |
| vpwsConfigDescr A textual string containing information about the VPWS
instance. If there is no information for this VPWS
instance, then this field MUST contain a zero-length octet
string. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.7 |
| vpwsConfigADType The auto-discovery protocol used by this VPWS.
Changing this value will cause an interruption to data
flow for this VPWS. | column | DC-L2VPN-MIBL2vpnADType | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.8 |
| vpwsConfigSigType The pseudowire signaling protocol used for auto-created
PWs on this VPWS.
If vpwsConfigADType is set to 'none' this field is
ignored.
If vpwsConfigAD… | column | DC-L2VPN-MIBL2vpnSigType | .1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.9 |