vpwsConfigLocalPreference

DC-VPWS-MIB · .1.3.6.1.4.1.629.10.19.1.1.1.17
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
The preference that the local PE router is the designated
forwarder for this VPWS.  High values are preferred to low
values.
              
This is only used if BGP auto-discovery is enabled
(vpwsConfigADType = bgp).  It can be used with BGP or LDP
signaling.
              
The local PE router sets the LOCAL_PREF attribute to the
value configured in this field in the BGP routes that it
sends for this VPWS.
              
Changing this value will cause an interruption to data
flow for this VPWS.

Context

MIB
DC-VPWS-MIB
OID
.1.3.6.1.4.1.629.10.19.1.1.1.17
Type
column
Access
readwrite
Status
current
Parent
vpwsConfigEntry
Table
vpwsConfigTable
Siblings
19

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vpwsConfigPwEncapType
The MPLS pseudowire encapsulation type used by this VPWS. If vpwsConfigADType is set to 'bgp', this field must be set to 'Ethernet' or 'Tagged Ethernet'. …
columnIANA-PWE3-MIBIANAPwTypeTC.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.10
vpwsConfigMtu
The layer 2 MTU of this VPWS. When using auto-discovery and signaling, this specifies the signaled layer 2 MTU. Changing this value will cause an int…
columnUnsigned32.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.11
vpwsConfigControlWord
Whether or not the pseudowires use a PW control word. Changing this value will cause an interruption to data flow for this VPWS.
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.12
vpwsConfigSeqDelivery
Whether or not the pseudowires must provide sequenced delivery of traffic. Changing this value will cause an interruption to data flow for this VPWS.
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.13
vpwsConfigRouteDistinguisher
The route distinguisher for this VPWS. See [RFC4364] for a complete definition of a route distinguisher. This is only used if BGP auto-discovery is enabled (vpwsCo…
columnDC-L2VPN-MIBBgpRouteDistinguisher.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.14
vpwsConfigVpnId
The VPN ID to advertise as a BGP extended community, or zero if none. If the VPWS uses BGP auto-discovery and LDP signaling (vpwsConfigADType = bgp and vpwsConfigSi…
columnDC-L2VPN-MIBBgpExtendedCommunity.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.15
vpwsConfigLocalSiteID
The local VPWS site ID, or zero if not specified. This is only used if BGP auto-discovery is enabled (vpwsConfigADType = bgp). It can be used with BGP or LDP signa…
columnDC-L2VPN-MIBL2vpnVeIdOrZero.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.16
vpwsConfigLabelBlockSize
The size of the label blocks for this VPWS. This is only used when using BGP auto-discovery with BGP signaling (vpwsConfigADType = bgp and vpwsConfigSigType = bgp).…
columnUnsigned32.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.18
vpwsConfigIncludeCSV
Whether or not the BGP NLRI for this VPWS will include a Circuit Status Vector TLV. This is only used when using BGP auto-discovery with BGP signaling (vpwsConfigAD…
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.19
vpwsIndex
Index identifying the VPWS instance.
columnDC-MASTER-TCNumericIndex.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.2
vpwsConfigIgnoreMtuMismatch
This field specifies whether mismatches of MTU size with remote PE routers should be ignored for this VPWS. If this field is false, PWs will not be established to r…
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.20
vpwsConfigIgnoreEncapsMismatch
This field specifies whether mismatches of encapsulation type with remote PE routers should be ignored for this VPWS. If this field is false, PWs will not be establ…
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.21
vpwsConfigRowStatus
The row status for this VPWS Configuration Table entry, used to create and destroy table entries.
columnSNMPv2-TCRowStatus.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.3
vpwsConfigAdminStatus
The administrative status of this VPWS instance, used to activate and deactivate the VPWS instance.
columnDC-MASTER-TCAdminStatus.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.4
vpwsConfigOperStatus
The current operational state of this VPWS instance. If the operational status is 'up' then the VPWS is programmed in the data plane.
columnDC-MASTER-TCNpgOperStatus.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.5
vpwsConfigName
A textual name of the VPWS instance. If there is no local name, or this field is otherwise not applicable, then this field MUST contain a zero-length octet string.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.6
vpwsConfigDescr
A textual string containing information about the VPWS instance. If there is no information for this VPWS instance, then this field MUST contain a zero-length octet string.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.7
vpwsConfigADType
The auto-discovery protocol used by this VPWS. Changing this value will cause an interruption to data flow for this VPWS.
columnDC-L2VPN-MIBL2vpnADType.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.8
vpwsConfigSigType
The pseudowire signaling protocol used for auto-created PWs on this VPWS. If vpwsConfigADType is set to 'none' this field is ignored. If vpwsConfigAD…
columnDC-L2VPN-MIBL2vpnSigType.1.2.826.0.1.1578918.5.94.114.4.1.1.1.1.9