rtmRibLooseNextHop
DC-RTM-MIB ·
.1.3.6.1.4.1.629.10.7.1.7.1.23
Object
column
SNMPv2-TCTruthValue
This flag indicates whether DC-RTM considers that the
next-hop address for this route is a loose next hop.
If DC-RTM sets this object to 'true' then
- it must also have set rtmRibType to 'remote'
- the next-hop address (rtmRibNextHop) may not
be on a directly connected device
- if DC-RTM cannot find a route to the next-hop
address, it does not return the route on the
rtmRouteTable, it does not redistribute the
route to routing protocol managers, and it does not
program the route to a forwarding table (unless the
forwarding table has registered to receive loose next
hops) or to a partner that is querying route
information (such as BGP or PIM).
Context
- MIB
- DC-RTM-MIB
- OID
.1.3.6.1.4.1.629.10.7.1.7.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rtmRibEntry
- Table
- rtmRibTable
- Siblings
- 25
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rtmRibFteIndex The HAF entity index identifying the instance of DC-RTM to which
this RIB entry applies. | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.7.1.1 |
| rtmRibType The type of route.
local(3) refers to a route for which the destination is a
local IP address or for which the next hop is the final
destination. This includes rou… | column | RouteType | .1.3.6.1.4.1.629.10.7.1.7.1.10 |
| rtmRibProto The routing mechanism via which this route was learned. Inclusion
of values for gateway routing protocols is not intended to imply that
hosts should support those protocols. | column | IANA-RTPROTO-MIBIANAipRouteProtocol | .1.3.6.1.4.1.629.10.7.1.7.1.11 |
| rtmRibAge The number of seconds since this route was last updated or otherwise
determined to be correct. Note that no semantics of 'too old' can
be implied except through knowledge of the … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.12 |
| rtmRibInfo A reference to MIB definitions specific to the particular routing
protocol which is responsible for this route, as determined by the
value specified in the route's rtmRibProto va… | column | RouteInfo | .1.3.6.1.4.1.629.10.7.1.7.1.13 |
| rtmRibNextHopAS The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
rtmRibProto value. When this object is u… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.14 |
| rtmRibMetric1 The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtmRibProto value. If this metric is not u… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.15 |
| rtmRibMetric2 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtmRibProto value. If this metric is not … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.16 |
| rtmRibMetric3 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtmRibProto value. If this metric is not … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.17 |
| rtmRibMetric4 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtmRibProto value. If this metric is not … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.18 |
| rtmRibMetric5 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtmRibProto value. If this metric is not … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.7.1.19 |
| rtmRibStatus The row status variable, used according to
row installation and removal conventions. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.7.1.7.1.2 |
| rtmRibFibRoute Flag indicating whether or not this route has been
programmed either to a forwarding table, or to a partner
that queries route information (such as BGP or PIM).
If … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.7.1.20 |
| rtmRibRpmIndex The HAF entity index for the RPM that supplied this route,
or zero for static routes or automatically configured routes.
This is used to distinguish routes in the system where
mul… | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.7.1.21 |
| rtmRibConnected Indicates whether the route destination is directly
connected.
A directly connected route can be reached without going
through any IP routers.
Route … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.7.1.22 |
| rtmRibLocalDestIfIndex If the route destination is a local IP address then this
is the interface index that the local IP address is
assigned to. Otherwise this field is zero. | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.7.1.24 |
| rtmRibAdminDistance Administrative distance for this route.
The lower the administrative distance for a given route,
the more likely that route is to be used by DC-RTM as the
active ro… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.7.1.25 |
| rtmRibPathType Protocol specific path type. This field only has meaning
if rtmRibType is set to 'remote'. Otherwise it is set to
'none'. | column | DC-MASTER-TCPathType | .1.3.6.1.4.1.629.10.7.1.7.1.26 |
| rtmRibDestType The type of the address used as the destination IP address
for this route. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.7.1.3 |
| rtmRibDest Destination internetwork address or subnet address. The
destination prefix length is applied to this value, and to a
particular destination address, to determine whether the rout… | column | OctetString | .1.3.6.1.4.1.629.10.7.1.7.1.4 |
| rtmRibDestLen Prefix length (in bits) to apply to the rtmRibDest object,
to obtain the set of addresses to which this route applies.
If the prefix length is L, then applying the … | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.7.1.5 |
| rtmRibTos The policy specifier is the IP TOS Field. The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.
… | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.7.1.6 |
| rtmRibNextHopType The type of the address used as the next-hop address
for this route. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.7.1.7 |
| rtmRibNextHop On remote routes, the address of the next system en route;
Otherwise, zero. | column | OctetString | .1.3.6.1.4.1.629.10.7.1.7.1.8 |
| rtmRibIfIndex The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached. | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.7.1.9 |