rtmRibLocalDestIfIndex

DC-RTM-MIB · .1.3.6.1.4.1.629.10.7.1.7.1.24
MIB view Table view

Object

column Integer32 
If the route destination is a local IP address then this
is the interface index that the local IP address is
assigned to.  Otherwise this field is zero.

Context

MIB
DC-RTM-MIB
OID
.1.3.6.1.4.1.629.10.7.1.7.1.24
Type
column
Access
readonly
Status
current
Parent
rtmRibEntry
Table
rtmRibTable
Siblings
25

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rtmRibFteIndex
The HAF entity index identifying the instance of DC-RTM to which this RIB entry applies.
columnFteIndex.1.3.6.1.4.1.629.10.7.1.7.1.1
rtmRibType
The type of route. local(3) refers to a route for which the destination is a local IP address or for which the next hop is the final destination. This includes rou…
columnRouteType.1.3.6.1.4.1.629.10.7.1.7.1.10
rtmRibProto
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
columnIANA-RTPROTO-MIBIANAipRouteProtocol.1.3.6.1.4.1.629.10.7.1.7.1.11
rtmRibAge
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.12
rtmRibInfo
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's rtmRibProto va…
columnRouteInfo.1.3.6.1.4.1.629.10.7.1.7.1.13
rtmRibNextHopAS
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's rtmRibProto value. When this object is u…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.14
rtmRibMetric1
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not u…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.15
rtmRibMetric2
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.16
rtmRibMetric3
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.17
rtmRibMetric4
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.18
rtmRibMetric5
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.7.1.19
rtmRibStatus
The row status variable, used according to row installation and removal conventions.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.629.10.7.1.7.1.2
rtmRibFibRoute
Flag indicating whether or not this route has been programmed either to a forwarding table, or to a partner that queries route information (such as BGP or PIM). If …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.7.1.7.1.20
rtmRibRpmIndex
The HAF entity index for the RPM that supplied this route, or zero for static routes or automatically configured routes. This is used to distinguish routes in the system where mul…
columnInteger32.1.3.6.1.4.1.629.10.7.1.7.1.21
rtmRibConnected
Indicates whether the route destination is directly connected. A directly connected route can be reached without going through any IP routers. Route …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.7.1.7.1.22
rtmRibLooseNextHop
This flag indicates whether DC-RTM considers that the next-hop address for this route is a loose next hop. If DC-RTM sets this object to 'true' then - it must also…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.7.1.7.1.23
rtmRibAdminDistance
Administrative distance for this route. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active ro…
columnDC-MASTER-TCAdminDistance.1.3.6.1.4.1.629.10.7.1.7.1.25
rtmRibPathType
Protocol specific path type. This field only has meaning if rtmRibType is set to 'remote'. Otherwise it is set to 'none'.
columnDC-MASTER-TCPathType.1.3.6.1.4.1.629.10.7.1.7.1.26
rtmRibDestType
The type of the address used as the destination IP address for this route.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.629.10.7.1.7.1.3
rtmRibDest
Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the rout…
columnOctetString.1.3.6.1.4.1.629.10.7.1.7.1.4
rtmRibDestLen
Prefix length (in bits) to apply to the rtmRibDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying the …
columnInteger32.1.3.6.1.4.1.629.10.7.1.7.1.5
rtmRibTos
The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. …
columnInteger32.1.3.6.1.4.1.629.10.7.1.7.1.6
rtmRibNextHopType
The type of the address used as the next-hop address for this route.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.629.10.7.1.7.1.7
rtmRibNextHop
On remote routes, the address of the next system en route; Otherwise, zero.
columnOctetString.1.3.6.1.4.1.629.10.7.1.7.1.8
rtmRibIfIndex
The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
columnInteger32.1.3.6.1.4.1.629.10.7.1.7.1.9