rtmRibIfIndex

DC-RTM-MIB · .1.3.6.1.4.1.629.10.7.1.7.1.9

Object

column Integer32

The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.

Context

MIB: DC-RTM-MIB
OID: .1.3.6.1.4.1.629.10.7.1.7.1.9
Type: column
Access: noaccess
Status: current
Parent: rtmRibEntry
Table: rtmRibTable
Siblings: 25

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rtmRibFteIndex The HAF entity index identifying the instance of DC-RTM to which this RIB entry applies.	column	FteIndex	`.1.3.6.1.4.1.629.10.7.1.7.1.1`
rtmRibType The type of route. local(3) refers to a route for which the destination is a local IP address or for which the next hop is the final destination. This includes rou…	column	RouteType	`.1.3.6.1.4.1.629.10.7.1.7.1.10`
rtmRibProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	column	IANA-RTPROTO-MIBIANAipRouteProtocol	`.1.3.6.1.4.1.629.10.7.1.7.1.11`
rtmRibAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.12`
rtmRibInfo A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's rtmRibProto va…	column	RouteInfo	`.1.3.6.1.4.1.629.10.7.1.7.1.13`
rtmRibNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's rtmRibProto value. When this object is u…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.14`
rtmRibMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not u…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.15`
rtmRibMetric2 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.16`
rtmRibMetric3 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.17`
rtmRibMetric4 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.18`
rtmRibMetric5 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.629.10.7.1.7.1.19`
rtmRibStatus The row status variable, used according to row installation and removal conventions.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.629.10.7.1.7.1.2`
rtmRibFibRoute Flag indicating whether or not this route has been programmed either to a forwarding table, or to a partner that queries route information (such as BGP or PIM). If …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.629.10.7.1.7.1.20`
rtmRibRpmIndex The HAF entity index for the RPM that supplied this route, or zero for static routes or automatically configured routes. This is used to distinguish routes in the system where mul…	column	Integer32	`.1.3.6.1.4.1.629.10.7.1.7.1.21`
rtmRibConnected Indicates whether the route destination is directly connected. A directly connected route can be reached without going through any IP routers. Route …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.629.10.7.1.7.1.22`
rtmRibLooseNextHop This flag indicates whether DC-RTM considers that the next-hop address for this route is a loose next hop. If DC-RTM sets this object to 'true' then - it must also…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.629.10.7.1.7.1.23`
rtmRibLocalDestIfIndex If the route destination is a local IP address then this is the interface index that the local IP address is assigned to. Otherwise this field is zero.	column	Integer32	`.1.3.6.1.4.1.629.10.7.1.7.1.24`
rtmRibAdminDistance Administrative distance for this route. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active ro…	column	DC-MASTER-TCAdminDistance	`.1.3.6.1.4.1.629.10.7.1.7.1.25`
rtmRibPathType Protocol specific path type. This field only has meaning if rtmRibType is set to 'remote'. Otherwise it is set to 'none'.	column	DC-MASTER-TCPathType	`.1.3.6.1.4.1.629.10.7.1.7.1.26`
rtmRibDestType The type of the address used as the destination IP address for this route.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.629.10.7.1.7.1.3`
rtmRibDest Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the rout…	column	OctetString	`.1.3.6.1.4.1.629.10.7.1.7.1.4`
rtmRibDestLen Prefix length (in bits) to apply to the rtmRibDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying the …	column	Integer32	`.1.3.6.1.4.1.629.10.7.1.7.1.5`
rtmRibTos The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. …	column	Integer32	`.1.3.6.1.4.1.629.10.7.1.7.1.6`
rtmRibNextHopType The type of the address used as the next-hop address for this route.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.629.10.7.1.7.1.7`
rtmRibNextHop On remote routes, the address of the next system en route; Otherwise, zero.	column	OctetString	`.1.3.6.1.4.1.629.10.7.1.7.1.8`