pimTmEntRegSrcAndGrpFilter
DC-PIM-MIB ·
.1.2.826.42.1.1578918.5.71.1.1.1.18.1.22
Object
When Register message filtering by source and group
address is enabled (that is, when
pimTmEntUseRegSrcAndGrpFilter is 'true'), then:
- for groups for which the local router is the RP, it
will process received PIM Register messages as normal
only if the {source, group} pair of the encapsulated
multicast data packet is included in the extended
access list corresponding to the list index value
configured for this object; if the {source, group} pair
is excluded from the extended access list, the local
router will send a Register-Stop message, and
- on interfaces on which the local router is the DR, it
will encapsulate received multicast data packets and
forward them in PIM Register messages only if the
{source, group} pair of the multicast data packet is
included in the extended access list corresponding to
the list index value configured for this object.
In other words, the extended access list is a whitelist of
the {source, group} pairs for which the local router is
permitted to Register-encapsulate/decapsulate multicast
data packets.
pimTmEntRegSrcAndGrpFilter defaults to 0, which indicates
that no access list is specified.
When pimTmEntUseRegSrcAndGrpFilter is set to to 'true',
then pimTmEntRowStatus can only become 'active' if a
non-zero value has been specified for
pimTmEntRegSrcAndGrpFilter.
This field is only relevant for PIM-SM. This field is
ignored if pimTmEntMgmdProxy is set to 'true', or 'sparse'
is clear for pimTmEntMode.
Context
- MIB
- DC-PIM-MIB
- OID
.1.2.826.42.1.1578918.5.71.1.1.1.18.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pimTmEntEntry
- Table
- pimTmEntTable
- Siblings
- 68
Syntax
DC-MASTER-TCExtAccessListListIndexOrZero
- Source
- DC-MASTER-TCExtAccessListListIndexOrZero
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimTmEntIndex The index of this pimTmEntEntry. This is the HAF entity
index passed on the entity create parameters. | column | DC-MASTER-TCNumericIndex | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.1 |
| pimTmEntSGStateStored The number of {source, group} pairs for which DC-PIM TIB
Manager is storing non-interface specific (S,G) state. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.10 |
| pimTmEntStarGIStateLimit The maximum number of {group, interface} pairs for which
DC-PIM TIB Manager is allowed to store (*,G,I) state. A
value of zero means that there is no limit.
Decrea… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.11 |
| pimTmEntStarGIStateWarnThold DC-PIM TIB Manager logs an exception if the number of
{group, interface} pairs for which it is storing (*,G,I)
state exceeds this value. A value of zero means that there
is no wa… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.12 |
| pimTmEntStarGIStateStored The number of {group, interface} pairs for which DC-PIM TIB
Manager is storing (*,G,I) state. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.13 |
| pimTmEntSGIStateLimit The maximum number of {source, group, interface} triplets
for which DC-PIM TIB Manager is allowed to store (S,G,I)
state. A value of zero means that there is no limit.
… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.14 |
| pimTmEntSGIStateWarnThold DC-PIM TIB Manager logs an exception if the number of
{source, group, interface} triplets for which it is storing
(S,G,I) state exceeds this value. A value of zero means
that the… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.15 |
| pimTmEntSGIStateStored The number of {source, group, interface} triplets for which
DC-PIM TIB Manager is storing (S,G,I) state. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.16 |
| pimTmEntUseAsmGrpFilter Setting this object to 'true' enables the PIM-SM ASM and
BIDIR-PIM group filter specified by pimTmEntAsmGrpFilter.
This field is only relevant for PIM-SM and BIDIR-… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.17 |
| pimTmEntAsmGrpFilter When PIM-SM ASM / BIDIR-PIM group filtering is enabled
(that is, when pimTmEntUseAsmGrpFilter is 'true'), then
for groups in the PIM-SM ASM and BIDIR-PIM spaces, the
local router … | column | DC-MASTER-TCStdAccessListListIndexOrZero | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.18 |
| pimTmEntUseSsmSrcAndGrpFilter Setting this object to 'true' enables the SSM source and
group filter specified by pimTmEntSsmSrcAndGrpFilter.
This field is only relevant for PIM-SM. This field i… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.19 |
| pimTmEntRowStatus Used to create and delete a DC-PIM TIB Manager Entity Table
entry. | column | SNMPv2-TCRowStatus | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.2 |
| pimTmEntSsmSrcAndGrpFilter When SSM source and group filtering is enabled (that is,
when pimTmEntUseSsmSrcAndGrpFilter is 'true'), then for
groups in the SSM space, the local router will:
- … | column | DC-MASTER-TCExtAccessListListIndexOrZero | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.20 |
| pimTmEntUseRegSrcAndGrpFilter Setting this object to 'true' enables the Register message
filter by source and group address, specified by
pimTmEntRegSrcAndGrpFilter.
This field is only relevant … | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.21 |
| pimTmEntRegSuppressionTime The mean value of the randomized interval during which a
DR stops Register-encapsulation after receiving a PIM
Register-Stop message. This object corresponds to the
'Register_Sup… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.23 |
| pimTmEntRegProbeTime The time to wait for a PIM Register-Stop message after
sending a PIM Null-Register message, before resuming
Register-encapsulation at a DR. This object corresponds
to the 'Regist… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.24 |
| pimTmEntKeepalivePeriod The time to keep (S,G) state alive in the absence of PIM
(S,G) Join messages, (S,G) local membership or (S,G) data
packets. This object corresponds to the 'SourceLifetime'
define… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.25 |
| pimTmEntSendIfStateChangeTraps Setting this object to 'true' means that DC-PIM TIB
Manager will send a pimInterfaceStateChange trap when an
interface's operational state changes.
This field is ig… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.26 |
| pimTmEntSupportedAddrType This field indicates the address family type that this
entity supports. On routers which support multiple
address families, separate DC-PIM-TM and DC-PIM-NM
entities must be conf… | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.27 |
| pimTmEntMgmdProxy This field indicates whether this entity is configured to
be an MGMD proxy device using a deprecated mode of
integration with IGMP host support.
In this mode the MP… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.28 |
| pimTmEntMode This field indicates the mode(s) that the PIM-TM entity is
configured to operate in.
- 'sparse' for PIM-SM, as defined in RFC4601.
- 'dense' for PI… | column | PimEntMode | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.29 |
| pimTmEntAdminStatus The desired administrative state of the DC-PIM TIB Manager
entity. | column | DC-MASTER-TCAdminStatus | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.3 |
| pimTmEntStateRefreshCapable This field defines whether the local router is capable of
originating and flooding PIM-DM State Refresh messages.
State Refresh messages are used to ensure that, in a
stable netwo… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.30 |
| pimTmEntStateRefreshInterval The interval between successive State Refresh(S,G)
messages originated by the local router. This object
corresponds to the 'RefreshInterval' timer value defined
in the PIM-DM spe… | column | Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.31 |
| pimTmEntSnoopBridgeDomainType The type of bridge domain supported by this entity.
This field is only relevant for MGMD snooping. If
pimTmEntMode is not 'mgmd-snooping', this value has no
effect… | column | DC-MASTER-TCL2BridgeDomainType | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.32 |
| pimTmEntSnoopBridgeDomainId The principal ID of the bridge domain supported by this
entity.
This field is only valid if pimTmEntSnoopBridgeDomainType
is not 'none'.
The interpre… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.33 |
| pimTmEntSnoopBridgeDomainSubId The secondary ID of the bridge domain supported by this
entity.
This field is only valid if pimTmEntSnoopBridgeDomainType
is 'vpws' or 'vpls'.
The in… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.34 |
| pimTmEntMsdpFlowsRcvd This field is deprecated. It returns the same value as
pimTmEntStatsMsdpFlowsRcvd. | column | SNMPv2-SMICounter32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.35 |
| pimTmEntMsdpFlowsSent This field is deprecated. It returns the same value as
pimTmEntStatsMsdpFlowsSent. | column | SNMPv2-SMICounter32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.36 |
| pimTmEntNullRegCount This field is deprecated. It returns the same value as
pimTmEntStatsNullRegCount. | column | SNMPv2-SMICounter32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.37 |
| pimTmEntClearCounters Set this object to 'true' to cause this entity to reset
all its statistics counters - that is, all objects in
pimTmEntStatsTable, plus the deprecated statistics objects
in this pi… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.38 |
| pimTmEntNumSources Number of different source addresses known by this entity. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.39 |
| pimTmEntOperStatus The current operational state of the DC-PIM TIB Manager
entity. | column | DC-MASTER-TCNpgOperStatus | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.4 |
| pimTmEntNumRPs Number of different Rendezvous Point (RP) addresses known
by this entity.
DC-PIM always returns zero for the value of this object in
either of the following cases.
… | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.40 |
| pimTmEntGRBackstopDuration The length of the Graceful Restart backstop timer to run
within DC-PIM, in seconds.
Graceful Restart is currently only supported when running
in IGMP Proxy, IGMP Sn… | column | PimGrTimerValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.41 |
| pimTmEntGRJoinStartupDuration The length of the join startup timer to run within DC-PIM,
in seconds.
This timer is only used when Graceful Restart is
supported. This is the case when
pimTmEntGR… | column | PimGrTimerValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.42 |
| pimTmEntScheduleLimit The maximum number of objects that can be processed in a
single schedule.
When subcomponents are scheduled by receipt of an IPS or a
timer pop, that IPS can cause m… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.43 |
| pimTmEntRtiName This name of routing instance in which
this PIM instance is created. | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.44 |
| pimTmEntRtiIndex The index of routing instance in which
this PIM instance is created. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.45 |
| pimTmEntTenantName Name of the tenant which owns this PIM instance | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.46 |
| pimTmEntTenantId ID of the tenant which owns this PIM instance | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.47 |
| pimTmEntDynInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted
on dynamic interfaces. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM and
PIM-DM specif… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.48 |
| pimTmEntDynInterfaceJoinPruneInterval The frequency at which this router sends PIM Join/Prune
messages on dynamic interfaces. This object corresponds
to the 't_periodic' timer value defined in the PIM-SM
specificatio… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.49 |
| pimTmEntGStateLimit The maximum number of groups for which DC-PIM TIB Manager
is allowed to store non-interface specific (*,G) and/or
(S,G) state. A value of zero means that there is no limit.
… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.5 |
| pimTmEntDynInterfaceHelloHoldtime The value set in the Holdtime field of PIM Hello messages
transmitted on dynamic interfaces, that is, the amount of time
a receiver must consider the neighbor reachable, in the
ab… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.50 |
| pimTmEntDynInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a PIM
Join/Prune message sent on dynamic interfaces, that is, the
amount of time a receiver must keep the Join/Prune state
alive, in … | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.51 |
| pimTmEntDynInterfacePropagationDelay The value this router inserts into the Propagation_Delay
field of the LAN Prune Delay option in the PIM Hello
messages it sends on dynamic interfaces, that is, the expected
propag… | column | milliseconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.52 |
| pimTmEntDynInterfaceOverrideInterval The value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on dynamic interfaces, that is, the preferred
maxim… | column | milliseconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.53 |
| pimTmEntDynInterfaceAssertInterval The frequency at which this router sends PIM Assert
messages on dynamic interfaces when it is the assert winner.
This object corresponds to the 'Assert_Time' minus the
'Assert_Ove… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.54 |
| pimTmEntDynInterfaceAssertHoldtime The interval before this router leaves assert loser state
on dynamic interfaces, unless it receives a PIM Assert message
that refreshes this state. This object corresponds to the… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.55 |
| pimTmEntSptThresholdPps The threshold in packets per seconds to control transition to
direct SPT.
Note the value 0 for this field and pimTmEntSptThresholdKbps field
indicates threshold as … | column | packets per second Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.56 |
| pimTmEntSptThresholdKbps The threshold in kilobits per seconds to control transition to
direct SPT.
Note the value 0 for this field and pimTmEntSptThresholdPps field
indicates threshold as … | column | kilobits per second Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.57 |
| pimTmEntDynInterfaceDRPriority The Designated Router Priority value inserted into the DR
Priority option on this interface. If all routers on the
interface include the DR Priority option in their PIM
Hello mes… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.58 |
| pimTmEntMultipathMode The method of selecting a next hop when there are multiple
ECMP RPF Next Hops.
The following options are available.
- AMB_PIM_MPATH_HIGHEST_NBR. No… | column | PimMultipathMode | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.59 |
| pimTmEntGStateWarnThold DC-PIM TIB Manager logs an exception if the number of
groups for which it is storing non-interface specific (*,G)
and/or (S,G) state exceeds this value. A value of zero
means tha… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.6 |
| pimTmEntBidirDataMonitorEnable Whether to enable monitoring of active data flows for
BIDIR-PIM groups. Enabling this is a prerequisite for the
following.
- Static RP load-splitting for BIDIR gr… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.60 |
| pimTmEntBsrRPMultipathMode The group modes for which PIM performs RP load-splitting,
when needing to choose between multiple BSR-learnt RPs,
each with the same PIM mode and priority value.
To… | column | PimBsrRPMultipathMode | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.61 |
| pimTmEntGRStatus The current status of PIM Graceful Restart. | column | PimGrStatus | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.62 |
| pimTmEntGRBackstopRemaining The length of time remaining on the backstop timer. Zero
if the backstop timer is not running. | column | seconds SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.63 |
| pimTmEntGRJoinStartupRemaining The length of time remaining on the join startup timer.
Zero if the timer is not running. | column | seconds SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.64 |
| pimTmEntRegisterSourceIf The interface index for the interface from which the
source address for Register messages is chosen.
This field is not used for Register messages sent to
Anycast-RP… | column | Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.65 |
| pimTmEntPassInterfaceInfo Setting this object to 'true' means that DC-PIM TIB
Manager will pass information about interfaces to the MPF
stub in ATG_TIBI_ADD_UPD_MCAST_IF and
ATG_TIBI_DEL_MCAST_IF messages.… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.66 |
| pimTmEntBSRTimeout The interval for which an elected BSR remains valid after
the receipt of a BSM. | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.67 |
| pimTmEntEnableAlarms Enables alarms on this PIM instance | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.68 |
| pimTmEntRPMultipathAlgorithm The algorithm for selecting an RP, when there are multiple
RPs with the same information origin (static or BSR), PIM
mode and priority value.
To conform to RFCs 460… | column | PimRPMultipathAlgorithms | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.69 |
| pimTmEntGStateStored The number of groups for which DC-PIM TIB Manager is
storing non-interface specific (*,G) and/or (S,G) state. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.7 |
| pimTmEntSGStateLimit The maximum number of {source, group} pairs for which
DC-PIM TIB Manager is allowed to store non-interface
specific (S,G) state. A value of zero means that there is
no limit.
… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.8 |
| pimTmEntSGStateWarnThold DC-PIM TIB Manager logs an exception if the number of
{source, group} pairs for which it is storing non-interface
specific (S,G) state exceeds this value. A value of zero
means t… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.18.1.9 |