dpConfigLLMMulticastTierGroupTable
DATAPOWER-CONFIG-MIB ·
.1.3.6.1.4.1.14685.3.2.184
Object
table
The LLM Multicast Tier Group identifies a configuration that combines a group of two or more machines called tier members into a tier failover group for stream-based Reliable and Consistent Message Streaming (RCMS). A tier consists of a group of application components in a configuration where each component is an identical replica. Each replica executes the application logic as if it was the only component. RCMS, by synchronizing inbound and outbound traffic for each tier member, ensures that the application remains available in the case of a failure. As a result, any new tier component can start fully functioning in parallel with its existing running peers, and support them in case of failure. RCMS is a part of LLM that provides high availability and consistent, ordered message delivery. It supports the following features: Failure detection and failover Total ordering State synchronization Component group management RCMS is based on a component replication model where all members of a tier group perform the following actions: Receive the same input Perform same processing Produce the same output RCMS enhances the high availability capabilities of RMM by ensuring that all instances of the application get exactly the same input and can therefore maintain identical state. For receiver tier topics this means that in all tier members all the tier receiver topics deliver exactly the same set of messages to the application. If the tier enforces total order, then all the messages from all topics are delivered in exactly the same order. Multiple instances of the application run simultaneously. If one of the instances of the application fails, RCMS detects the failure and automatically takes corrective actions (for example, to replace an instance that failed). Stream failover allows receivers to switch from one transmitter stream to another with little or no message loss when a transmitter fails. Both RMM and RUM support stream failover. RCMS implements basic stream failover by coordinating transmitters and synchronizing application state and message sequence numbers.
Context
- MIB
- DATAPOWER-CONFIG-MIB
- OID
.1.3.6.1.4.1.14685.3.2.184- Type
- table
- Status
- current
- Parent
- dpConfig
- Siblings
- 357
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dpConfigDNSNameServiceTable Configure the DNS name resolution service | table | - | .1.3.6.1.4.1.14685.3.2.1 |
| dpConfigHTTPUserAgentTable Use this page to configure a User Agent, which the device uses to retrieve
resources (for example, stylesheets or XML documents) from remote servers.
A User Agent can also affect … | table | - | .1.3.6.1.4.1.14685.3.2.10 |
| dpConfigGatewayBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.100 |
| dpConfigMultiProtocolGatewayTable A Multi-Protocol Gateway service can accept client-originated messages in
a variety of protocols. The Gateway can subsequently pass messages to a
back end server using a variety o… | table | - | .1.3.6.1.4.1.14685.3.2.101 |
| dpConfigSourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.102 |
| dpConfigHTTPSourceProtocolHandlerTable An HTTP handler receives HTTP requests that are not over SSL and forwards
them to the appropriate DataPower service. HTTP handlers conform to RFC
2616. | table | - | .1.3.6.1.4.1.14685.3.2.103 |
| dpConfigHTTPSSourceProtocolHandlerTable An HTTPS handler receives HTTP requests over SSL and forwards them to the
appropriate DataPower service. HTTPS handlers conform to RFC 2616. | table | - | .1.3.6.1.4.1.14685.3.2.104 |
| dpConfigMQSourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.105 |
| dpConfigXTCProtocolHandlerTable The configuration for the stateful TCP protocol handler. This protocol
uses raw XML - where the close of the root node delineates the document -
PI's and comments outside of the r… | table | - | .1.3.6.1.4.1.14685.3.2.106 |
| dpConfigCryptoKerberosKeytabTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.109 |
| dpConfigStatelessTCPSourceProtocolHandlerTable The configuration for the stateless TCP protocol handler. This protocol
uses raw XML - where the close of the root node delineates the document -
PI's and comments outside of the … | table | - | .1.3.6.1.4.1.14685.3.2.110 |
| dpConfigSLMCredClassTable An SLM credentials class identifies a set of users (credentials) to be
subject to an SLM policy. An SLM credentials class consists of the
following types and properties: A credent… | table | - | .1.3.6.1.4.1.14685.3.2.111 |
| dpConfigSLMRsrcClassTable An SLM resource class identifies a set of resources to be subject to an
SLM policy. A resource class consists of the following types and
properties: A resource type that specifies… | table | - | .1.3.6.1.4.1.14685.3.2.112 |
| dpConfigSLMScheduleTable An SLM schedule defines the time period (hours and days) during which to
enforce the statements in an SLM policy. Schedules allow the application
of different statements during di… | table | - | .1.3.6.1.4.1.14685.3.2.113 |
| dpConfigSLMActionTable An SLM action defines the control procedure to trigger for transactions in
excess of the maximum transaction rate. As part of any control procedure,
the monitor writes an event to… | table | - | .1.3.6.1.4.1.14685.3.2.114 |
| dpConfigSLMPolicyTable An SLM policy counts messages or measures latency for messages that match
a set of select criteria and that pass through the appliance during a
configured interval. The policy can… | table | - | .1.3.6.1.4.1.14685.3.2.115 |
| dpConfigPeerGroupTable A collection of appliances that automatically update each other with real
time data of the types selected. For example, members in the group
exchange data to allow the enforcement… | table | - | .1.3.6.1.4.1.14685.3.2.116 |
| dpConfigReserved117Table Table. | table | - | .1.3.6.1.4.1.14685.3.2.117 |
| dpConfigTFIMEndpointTable Tivoli Federated Identity Manager Configuration | table | - | .1.3.6.1.4.1.14685.3.2.118 |
| dpConfigTCPProxyServiceTable Creates a TCP Proxy service. | table | - | .1.3.6.1.4.1.14685.3.2.12 |
| dpConfigxmltraceTable The device can record all, or a subset, of documents that pass through it
for later inspection. This should not be turned on in production
environments except for problem resoluti… | table | - | .1.3.6.1.4.1.14685.3.2.120 |
| dpConfigNFSClientSettingsTable Use this page to configure global NFS client parameters. This is the
global configuration for enabling NFS. | table | - | .1.3.6.1.4.1.14685.3.2.121 |
| dpConfigWSEndpointRewritePolicyTable Create or edit WS Endpoint Rewrite Policy | table | - | .1.3.6.1.4.1.14685.3.2.122 |
| dpConfigSQLDataSourceTable A SQL data source provides the configuration to establish a direct
connection to a database instance on a remote data server. When
configured, it is possible to dynamically perfor… | table | - | .1.3.6.1.4.1.14685.3.2.124 |
| dpConfigNFSStaticMountTable Use this page to create a static NFS mount, for URL or filesystem access.
These mounts will be kept mounted whenever their application domain is up. | table | - | .1.3.6.1.4.1.14685.3.2.125 |
| dpConfigNFSDynamicMountsTable Use this page to configure the parameters of dynamic NFS mounts for dpnfs:
URL fetches. These mounts support access via URLs of the form
dpnfs://hostname/path/file, causing the di… | table | - | .1.3.6.1.4.1.14685.3.2.126 |
| dpConfigWebAppErrorHandlingPolicyTable When an error occurs this policy specifies how to handle the response to
the user. | table | - | .1.3.6.1.4.1.14685.3.2.127 |
| dpConfigSimpleCountMonitorTable A simple TPS based message monitor that limits the transaction rate any
single user may achieve. | table | - | .1.3.6.1.4.1.14685.3.2.128 |
| dpConfigNameValueProfileTable Many HTTP things are expressed as name value pairs. These include HTTP
headers, cookie values, url-encoded query strings, and url-encoded request
messages. This profile provides a… | table | - | .1.3.6.1.4.1.14685.3.2.129 |
| dpConfigURLMapTable Configure/Edit URL maps. URL Maps are used by Processing Actions and by
XML Manager Compile Options Policies. | table | - | .1.3.6.1.4.1.14685.3.2.13 |
| dpConfigWebAppResponseTable The web response profile specifies various properties about the response
side of the transaction that must be satisfied. | table | - | .1.3.6.1.4.1.14685.3.2.130 |
| dpConfigWebAppRequestTable The web request profile specifies various properties about the request
side of the transaction that must be satisfied. | table | - | .1.3.6.1.4.1.14685.3.2.131 |
| dpConfigWebAppFWTable The web application firewall provides filtering, security, and input
validation for HTTP transactions. | table | - | .1.3.6.1.4.1.14685.3.2.132 |
| dpConfigAppSecurityPolicyTable An Application Security Policy establishes the rules to use to enforce
security for a Web Application Firewall service. This policy employs
request maps, response maps, and error … | table | - | .1.3.6.1.4.1.14685.3.2.133 |
| dpConfigUDDIRegistryTable The UDDI registry is deprecated. Instead, use WebSphere Service Registry
and Repository (WSRR) server. Configuration required for locating and
accessing a UDDI registry. To config… | table | - | .1.3.6.1.4.1.14685.3.2.134 |
| dpConfigWebAppSessionPolicyTable Session policy - specify a series of start pages that the a web
application firewall protected host use as initial browsing points.
Accessing these pages issues a signed and time … | table | - | .1.3.6.1.4.1.14685.3.2.135 |
| dpConfigJMSServerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.136 |
| dpConfigTibcoEMSServerTable TIBCO EMS Server is responsible for messaging services for communicating
applications by periodically monitoring/polling queues, by ensuring that
sent messages are directed to the… | table | - | .1.3.6.1.4.1.14685.3.2.137 |
| dpConfigTibcoEMSSourceProtocolHandlerTable TIBCO EMS Handler | table | - | .1.3.6.1.4.1.14685.3.2.138 |
| dpConfigXACMLPDPTable The XACML policies can be evaluated on a DataPower device, This on-box
XACML Policy Decision Point (PDP) allows customers to define the necessary
information so that it can evalua… | table | - | .1.3.6.1.4.1.14685.3.2.139 |
| dpConfigURLRefreshPolicyTable Configure/Edit URL Refresh Policies | table | - | .1.3.6.1.4.1.14685.3.2.14 |
| dpConfigJMSSourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.140 |
| dpConfigWebSphereJMSServerTable WebSphere JMS is responsible for messaging services for communicating
applications by periodically monitoring/polling queues, by ensuring that
sent messages are directed to the co… | table | - | .1.3.6.1.4.1.14685.3.2.141 |
| dpConfigWebSphereJMSSourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.142 |
| dpConfigProcessingMetadataTable A Processing Metadata object contains a list of metadata items extracted
from a message, such as protocol header values, or from the device
processing scope, such as system variab… | table | - | .1.3.6.1.4.1.14685.3.2.143 |
| dpConfigMTOMPolicyTable An MTOM policy provides a mechanism for optimizing the transmission and
wire format of an XML/SOAP message. Optimization is performed by selecting
elements with base64-encoded cha… | table | - | .1.3.6.1.4.1.14685.3.2.144 |
| dpConfigFTPServerSourceProtocolHandlerTable The FTP Server handler provides an FTP server that can be used to submit
files for processing by the system. Each file that is written results in
one transaction. There can be mul… | table | - | .1.3.6.1.4.1.14685.3.2.145 |
| dpConfigFilePollerSourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.146 |
| dpConfigNFSFilePollerSourceProtocolHandlerTable Use this front side option to have file based input from an NFS mount. The
mount point must exist and have the appropriate permissions to perform the
designated operations. For th… | table | - | .1.3.6.1.4.1.14685.3.2.147 |
| dpConfigFTPFilePollerSourceProtocolHandlerTable Use this front side option to have file based input from a configured FTP
directory. The directory must exist and have the appropriate permission to
perform the designated operati… | table | - | .1.3.6.1.4.1.14685.3.2.148 |
| dpConfigFTPQuoteCommandsTable The configturation creates a named list of FTP commands to be quoted to a
remote FTP server before a file transfer. These commands are referenced by
the FTP Policies section of a … | table | - | .1.3.6.1.4.1.14685.3.2.149 |
| dpConfigUserTable Create or edit a local user account. When you modify a local user account,
the changes do not affect remote user accounts in a role-based management
XML information file. An admin… | table | - | .1.3.6.1.4.1.14685.3.2.15 |
| dpConfigMQQMBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.150 |
| dpConfigMQQMGroupTable An IBM MQ Queue Manager Group enables automatic failover between queue
managers when one (or more) queue manager becomes unavailable. If you
define multiple backup queue managers,… | table | - | .1.3.6.1.4.1.14685.3.2.151 |
| dpConfigWSRRServerTable Configuration required to locate and access WSRR (WebSphere Service
Registry and Repository). | table | - | .1.3.6.1.4.1.14685.3.2.152 |
| dpConfigWSRRSubscriptionTable Use this screen to provide the required configuration properties for a
WSRR (WebSphere Service Registry and Repository) subscription. The WSRR
Subscription is useful when you want… | table | - | .1.3.6.1.4.1.14685.3.2.153 |
| dpConfigWebServiceSubscriptionTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.154 |
| dpConfigUDDISubscriptionTable The UDDI subscription is deprecated. Instead, use WebSphere Service
Registry and Repository (WSRR) subscription. Configuration required for a
UDDI subscriber to receive notificati… | table | - | .1.3.6.1.4.1.14685.3.2.155 |
| dpConfigVLANInterfaceTable A VLAN interface allows multiple logical LANs to coexist on the same
Ethernet segment. VLAN packets are identified by the IEEE 802.1Q protocol.
You can define multiple VLAN interf… | table | - | .1.3.6.1.4.1.14685.3.2.156 |
| dpConfigConformancePolicyTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.157 |
| dpConfigSOAPHeaderDispositionTable The list of instructions provided by customers to control how the SOAP
headers and/or children elements are handled. This object is used by
store:///soap-refine.xsl transform styl… | table | - | .1.3.6.1.4.1.14685.3.2.158 |
| dpConfigPolicyAttachmentsTable Create and configure ws-policy attachments for WSDLs | table | - | .1.3.6.1.4.1.14685.3.2.159 |
| dpConfigNetworkSettingsTable Configure appliance-wide network settings. | table | - | .1.3.6.1.4.1.14685.3.2.16 |
| dpConfigPolicyParametersTable Configuration to persist the values of ws-policy parameters. | table | - | .1.3.6.1.4.1.14685.3.2.160 |
| dpConfigIMSConnectTable IMS Connect properties. Properties on the Advanced tab are default values.
Some of these properties can be overridden in the URL and others through
header injection. | table | - | .1.3.6.1.4.1.14685.3.2.161 |
| dpConfigIMSConnectSourceProtocolHandlerTable An IMS Connect Handler object handles IMS protocol communications with
DataPower services. | table | - | .1.3.6.1.4.1.14685.3.2.162 |
| dpConfigLDAPSearchParametersTable An LDAP Search Parameters object is a container for the parameters to use
to perform an LDAP search operation. When used with authentication, the
search retrieves the distinguishe… | table | - | .1.3.6.1.4.1.14685.3.2.163 |
| dpConfigConfigDeploymentPolicyTable A deployment policy contains a set of rules that are applied during a
configuration import. A deployment policy can be used to accept, filter,
or modify configuration during impor… | table | - | .1.3.6.1.4.1.14685.3.2.164 |
| dpConfigCompactFlashTable The configuration of a compact flash storage card as auxiliary data
storage. | table | - | .1.3.6.1.4.1.14685.3.2.165 |
| dpConfigRaidVolumeTable Configure a RAID volume for data storage. The RAID volume consists of two
or more hard disk drives in a RAID configuration. The subdirectory
specified is available in the local: a… | table | - | .1.3.6.1.4.1.14685.3.2.166 |
| dpConfigIScsiInitiatorConfigTable The iSCSI protocol is deprecated. The configuration of the iSCSI
Initiator. The Initiator can only be modified if there are no active iSCSI
targets. | table | - | .1.3.6.1.4.1.14685.3.2.167 |
| dpConfigLLMSourceProtocolHandlerTable Use this panel to define an IBM MQ Low Latency Handler that can be
attached to a Multi-Protocol Gateway as a front side protocol handler. | table | - | .1.3.6.1.4.1.14685.3.2.168 |
| dpConfigTRVSourceProtocolHandlerTable Use this panel to define a TIBCO RV Handler that can be attached to a
Multi-Protocol Gateway as a front side protocol handler. | table | - | .1.3.6.1.4.1.14685.3.2.169 |
| dpConfigXMLManagerTable An XML Manager manages the compilation and caching of stylesheets, the
caching of documents, and provides configuration constraints on the size
and parsing depth of documents. You… | table | - | .1.3.6.1.4.1.14685.3.2.17 |
| dpConfigIScsiHBAConfigTable The iSCSI protocol is deprecated. The configuration of the iSCSI Host Bus
Adapter (HBA). The iSCSI HBA is the hardware that is responsible for the
management of iSCSI communicatio… | table | - | .1.3.6.1.4.1.14685.3.2.170 |
| dpConfigIScsiTargetConfigTable The iSCSI protocol is deprecated. Defines the configuration of the
connection instance to a remote iSCSI target. | table | - | .1.3.6.1.4.1.14685.3.2.171 |
| dpConfigIScsiVolumeConfigTable The iSCSI protocol is deprecated. File system operations for iSCSI
devices. | table | - | .1.3.6.1.4.1.14685.3.2.172 |
| dpConfigIScsiChapConfigTable The iSCSI protocol is deprecated. The configuration of the Challenge
Handshake Authentication Protocol (CHAP) for iSCSI targets. | table | - | .1.3.6.1.4.1.14685.3.2.173 |
| dpConfigZosNSSClientTable The z/OS NSS client object provides the parameters for authentication with
SAF on a z/OS Communications Server. | table | - | .1.3.6.1.4.1.14685.3.2.174 |
| dpConfigSSHServerSourceProtocolHandlerTable The SFTP Server Handler provides an SSH SFTP server that can be used to
submit files for processing by the system. Each file that is written
results in one transaction. There can … | table | - | .1.3.6.1.4.1.14685.3.2.175 |
| dpConfigFTPDemonSourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.176 |
| dpConfigAS3SourceProtocolHandlerTable AS3 Handler | table | - | .1.3.6.1.4.1.14685.3.2.177 |
| dpConfigAS2SourceProtocolHandlerTable The configuration for a front side HTTP protocol handler. This handler
receives HTTP requests sent to the device and forwards them to the
appropriate gateway. It conforms to gatew… | table | - | .1.3.6.1.4.1.14685.3.2.178 |
| dpConfigB2BXPathRoutingPolicyTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.179 |
| dpConfigMQQMTable In IBM MQ, distributed send and receive queues are managed by a component
called a queue manager. The queue manager provides messaging services for
communicating applications by p… | table | - | .1.3.6.1.4.1.14685.3.2.18 |
| dpConfigLLMInstanceTable An LLM Instance object defines all port resources used by the LLM service.
The instance aggregates a combination of objects required to transmit and
receive the following types of… | table | - | .1.3.6.1.4.1.14685.3.2.180 |
| dpConfigLLMMulticastReceiveTable Use this panel to define the properties of a Low Latency Messaging
Multicast Receiver object. A receiver is part of a message delivery system
that accepts messages from one or mor… | table | - | .1.3.6.1.4.1.14685.3.2.181 |
| dpConfigLLMMulticastTransmitTable Use this panel to define the properties of a Low Latency Messaging
Multicast Transmit object. A transmitter is part of a message delivery
system that sends messages to one or more… | table | - | .1.3.6.1.4.1.14685.3.2.182 |
| dpConfigLLMUnicastTable Use this panel to define the properties of a Low Latency Messaging Unicast
object. It will contain both the receive and transmit configurations for
an LLM connection over TCP. | table | - | .1.3.6.1.4.1.14685.3.2.183 |
| dpConfigLLMRouteTable The Route object configures the transmission characteristics for outbound
messages. Each route object creates a logical outbound stream. An LLM
policy can define multiple routes o… | table | - | .1.3.6.1.4.1.14685.3.2.186 |
| dpConfigLLMPolicyTable An LLM Policy provides the means for receiving LLM data streams. Receiving
resources are defined in the LLM Multicast Receive object or LLM Unicast
object associated with the LLM … | table | - | .1.3.6.1.4.1.14685.3.2.187 |
| dpConfigFibreChannelHBATable The configuration of the Fibre Channel Host Bus Adapter (HBA). The Fibre
Channel HBA is the hardware that is responsible for the management of
Fibre Channel communications. | table | - | .1.3.6.1.4.1.14685.3.2.188 |
| dpConfigFibreChannelTargetTable Defines the configuration of the connection instance to a remote Fibre
Channel target. | table | - | .1.3.6.1.4.1.14685.3.2.189 |
| dpConfigXSLProxyServiceTable The XSL Proxy service is deprecated. Creates an XSL Proxy on local IP/port
for server on remote IP/port. A loopback proxy does not require a remote
IP and port. The Proxy applies … | table | - | .1.3.6.1.4.1.14685.3.2.19 |
| dpConfigFibreChannelVolumeTable File system operations for Fibre Channel devices. When the volume's
operational state changes from up to down, existing transactions using the
volume will attempt to complete prio… | table | - | .1.3.6.1.4.1.14685.3.2.190 |
| dpConfigWebB2BViewerTable Configure the web B2B Viewer Management interface. | table | - | .1.3.6.1.4.1.14685.3.2.192 |
| dpConfigB2BPersistenceTable Data storage for B2B transaction data | table | - | .1.3.6.1.4.1.14685.3.2.193 |
| dpConfigB2BProfileGroupTable A group of B2B Partner Profile objects that can be enable or disable at
the same time. Each partner profile in the group is identified by its name
and optional destination. Withou… | table | - | .1.3.6.1.4.1.14685.3.2.194 |
| dpConfigB2BGatewayTable The configuration for a B2B gateway instance. A B2B gateway can handle B2B
messages transmitted over a variety of AS and non-AS protocols for inbound
and outbound flows, as well a… | table | - | .1.3.6.1.4.1.14685.3.2.195 |
| dpConfigB2BProfileTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.196 |
| dpConfigWCCServiceTable Use the WebSphere Cell configuration to retrieve configuration information
and runtime information from a Network Deployment or Virtual Enterprise
product. Load balancer groups us… | table | - | .1.3.6.1.4.1.14685.3.2.197 |
| dpConfigFormsLoginPolicyTable The HTML forms login policy defines the details for collecting user
authentication information. | table | - | .1.3.6.1.4.1.14685.3.2.198 |
| dpConfigTRVPolicyTable A TIBCO RV Policy provides the means for receiving TIBCO RV data streams.
Receiving resources are defined in the TIBCO RV Policy object. A policy
can contain one or more TIBCO RV … | table | - | .1.3.6.1.4.1.14685.3.2.199 |
| dpConfigEthernetInterfaceTable Configure and manage Ethernet interfaces. | table | - | .1.3.6.1.4.1.14685.3.2.2 |
| dpConfigMQGWTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.20 |
| dpConfigTRVRouteTable The Route object configures the transmission characteristics for outbound
TIBCO RV messages. Each route object creates a logical outbound stream. A
TIBCO RV policy can define mult… | table | - | .1.3.6.1.4.1.14685.3.2.200 |
| dpConfigTRVTransportTable A TIBCO RV Transport object is a container for TIBCO RV transport
configuration properties. | table | - | .1.3.6.1.4.1.14685.3.2.201 |
| dpConfigLLMPolicyBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.202 |
| dpConfigLLMRouteBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.203 |
| dpConfigPOPPollerSourceProtocolHandlerBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.204 |
| dpConfigAS1PollerSourceProtocolHandlerTable The AS1 handler is a Post Office Protocol (POP) handler. The handler
manages the polling of a mailbox on a mail server. The mailbox receives
mail messages from external partners. … | table | - | .1.3.6.1.4.1.14685.3.2.205 |
| dpConfigPOPPollerSourceProtocolHandlerTable The Post Office Protocol (POP) handler manages the polling of a mailbox on
a mail server. The mailbox receives mail messages from external partners.
The handler retrieves and dele… | table | - | .1.3.6.1.4.1.14685.3.2.206 |
| dpConfigSMTPServerConnectionTable The SMTP server connection defines the connection details for a Simple
Mail Transport Protocol (SMTP) server. The appliance uses the SMTP server
connection for the following purpo… | table | - | .1.3.6.1.4.1.14685.3.2.207 |
| dpConfigXM70PersistenceTable Data storage for XM70 transaction data | table | - | .1.3.6.1.4.1.14685.3.2.208 |
| dpConfigWSRRSavedSearchSubscriptionTable Use this screen to provide the required configuration properties for a
WSRR (WebSphere Service Registry and Repository) saved search
subscription. The Saved Search Subscription is… | table | - | .1.3.6.1.4.1.14685.3.2.209 |
| dpConfigSSLProxyServiceTable Creates an SSL Proxy service. This service can be used to wrap or unwrap a
TCP stream in SSL. This service requires SSL profiles to secure the
connections. When the appliance is a… | table | - | .1.3.6.1.4.1.14685.3.2.21 |
| dpConfigEBMS2SourceProtocolHandlerTable The configuration for an ebMS2 protocol handler. | table | - | .1.3.6.1.4.1.14685.3.2.210 |
| dpConfigSAMLAttributesTable Define a list of SAML attributes for the SAML Assertion generator. | table | - | .1.3.6.1.4.1.14685.3.2.211 |
| dpConfigSSHClientProfileTable An SSH Client Profile is associated with an SSH URLOpener or with a Secure
Cloud Connector. Also, a Secure Cloud Connection requires an Application
Optimization license. The remot… | table | - | .1.3.6.1.4.1.14685.3.2.212 |
| dpConfigSFTPFilePollerSourceProtocolHandlerTable Use this front side option to have file based input from a configured SFTP
directory. The directory must exist and have the appropriate permission to
perform the designated operat… | table | - | .1.3.6.1.4.1.14685.3.2.213 |
| dpConfigZHybridTargetControlServiceTable The Sysplex Distributor Target Control Service on the DataPower Gateway
establishes control connections with the z/OS Sysplex Distributor that
allow the z/OS Sysplex Distributor t… | table | - | .1.3.6.1.4.1.14685.3.2.214 |
| dpConfigMultipathServiceTable Configures the Multipath server | table | - | .1.3.6.1.4.1.14685.3.2.215 |
| dpConfigClusterServiceTable Configures the cluster service. The cluster service is useful for
maintaining consistency of remote storage shared amongst multiple
appliances. This configuration must be identica… | table | - | .1.3.6.1.4.1.14685.3.2.216 |
| dpConfigSecureCloudConnectorTable Deprecated - Use this page to configure and manage a Secure Cloud
Connector for a single cloud server instance. | table | - | .1.3.6.1.4.1.14685.3.2.217 |
| dpConfigIPMILanChannelTable An Intelligent Platform Management Interface (IPMI) LAN channel allows
access to the Baseboard Management Controller (BMC) on the appliance over
a LAN. IPMI allows remote manageme… | table | - | .1.3.6.1.4.1.14685.3.2.218 |
| dpConfigIPMIUserTable An Intelligent Platform Management Interface (IPMI) user can create,
change, or destroy user authentication records in the Baseboard Management
Controller (BMC). Authentication re… | table | - | .1.3.6.1.4.1.14685.3.2.219 |
| dpConfigStylePolicyRuleTable Create, edit, or delete processing policy rules. Rules can also be created
and edited using a drag and drop interface by opening the Services menu
area on the left-hand navigation… | table | - | .1.3.6.1.4.1.14685.3.2.22 |
| dpConfigB2BCPACollaborationTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.220 |
| dpConfigMQFTESourceProtocolHandlerTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.221 |
| dpConfigB2BCPATable Table. | table | - | .1.3.6.1.4.1.14685.3.2.222 |
| dpConfigB2BCPASenderSettingTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.223 |
| dpConfigB2BCPAReceiverSettingTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.224 |
| dpConfigOAuthSupportedClientTable An OAuth client profile is the basic building block for an OAuth client
group. When you create an OAuth client profile, you define its role. As
you select the role, the WebGUI ref… | table | - | .1.3.6.1.4.1.14685.3.2.225 |
| dpConfigOAuthSupportedClientGroupTable To support the OAuth 2.0 protocol, an AAA policy requires the
configuration of an OAuth client group. An OAuth client group contains the
configured OAuth clients that the DataPowe… | table | - | .1.3.6.1.4.1.14685.3.2.226 |
| dpConfigSSLSNIServerProfileTable The SSL Server Name Indication (SNI) server profile secures connections
between the client and the appliance. | table | - | .1.3.6.1.4.1.14685.3.2.227 |
| dpConfigErrorReportSettingsTable Failure notification is a serviceability tool. By default, failure
notification is disabled. To use failure notification, you must enable the
configuration and allow the error rep… | table | - | .1.3.6.1.4.1.14685.3.2.23 |
| dpConfigXC10GridTable The configuration of an XC10 Grid defines the connection details to an
XC10 grid in an XC10 collective. To define this configuration, you must
define the XC10 collective, the grid… | table | - | .1.3.6.1.4.1.14685.3.2.235 |
| dpConfigRuntimeSettingsTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.246 |
| dpConfigSQLRuntimeSettingsTable Configure global sql runtime settings. A runtime environment is a
container object that hosts objects within the system. | table | - | .1.3.6.1.4.1.14685.3.2.247 |
| dpConfigWebApplicationGatewayTable A Web Application Gateway service can accept client-originated messages in
HTTP. The gateway can subsequently pass messages to a back end server
using HTTP. The messages may be pr… | table | - | .1.3.6.1.4.1.14685.3.2.248 |
| dpConfigInteropServiceTable This page shows the configuration of the Interoperability Test Service.
Interoperability Test Service is used to test stylesheets or maps. The
service is available via HTTP or HTT… | table | - | .1.3.6.1.4.1.14685.3.2.249 |
| dpConfigIPInterfaceTable Configure network Ethernet interfaces | table | - | .1.3.6.1.4.1.14685.3.2.25 |
| dpConfigODRConnectorGroupTable A collection of on demand router (ODR) connectors used to communicate with
the Intelligent Management service. | table | - | .1.3.6.1.4.1.14685.3.2.250 |
| dpConfigODRTable Specifies an on demand router (ODR). The ODR feature acts as a collection
of load balancer groups that distribute traffic to various clusters within
a WebSphere cell or Liberty Co… | table | - | .1.3.6.1.4.1.14685.3.2.251 |
| dpConfigSSLClientProfileTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.253 |
| dpConfigSSLServerProfileTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.254 |
| dpConfigSSLSNIMappingTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.256 |
| dpConfigMatchingTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.26 |
| dpConfigWebTokenServiceTable The web token service provides on-box HTTP services. | table | - | .1.3.6.1.4.1.14685.3.2.266 |
| dpConfigMessageContentFiltersTable A Message Content Filters is a group of HTTP header-based and XPath-based
filters. For HTTP header-based filters, the filter succeeds when the name
and value of an HTTP header fie… | table | - | .1.3.6.1.4.1.14685.3.2.267 |
| dpConfigMCFBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.268 |
| dpConfigMCFHttpHeaderTable Filter based on HTTP header. A specific header value is used to match the
request message. | table | - | .1.3.6.1.4.1.14685.3.2.269 |
| dpConfigSystemSettingsTable System settings provide the following purposes. Define appliance-specific
information, such as contact information, location, and name. Update
serial number after a replacement. E… | table | - | .1.3.6.1.4.1.14685.3.2.27 |
| dpConfigMCFXPathTable Filter based on specific data in the message. An XPath expression defines
a data element to be matched in the request message. | table | - | .1.3.6.1.4.1.14685.3.2.270 |
| dpConfigMCFHttpURLTable Filter based on the request URL. The filter value is matched to the
request URL. | table | - | .1.3.6.1.4.1.14685.3.2.271 |
| dpConfigMCFHttpMethodTable Filter based on the HTTP method. The filter value is matched to the HTTP
method in the request message. | table | - | .1.3.6.1.4.1.14685.3.2.272 |
| dpConfigIMSCalloutSourceProtocolHandlerTable An IMS Callout handler allows a Multi-Protocol Gateway to make
asynchronous requests to an IMS application with the ICAL protocol. An IMS
handler can retrieve IMS Callout messages… | table | - | .1.3.6.1.4.1.14685.3.2.273 |
| dpConfigPatternTable Patterns simplify service creation by enabling you to create services from
reusing predefined configurations with minimum customized inputs. | table | - | .1.3.6.1.4.1.14685.3.2.274 |
| dpConfigMCFCustomRuleTable A custom message content filter calls a processing rule to retrieve a
specified value. The filter value is matched to the contents of variable
'var://context/policy/mcf/RULE-NAME' | table | - | .1.3.6.1.4.1.14685.3.2.275 |
| dpConfigAS2ProxySourceProtocolHandlerTable A MEIG AS2 proxy handler receives AS2 requests over HTTP or HTTPS and
forwards them to the backend which is assumed to be an IBM
Multi-Enterprise Integration Gateway (MEIG) server… | table | - | .1.3.6.1.4.1.14685.3.2.277 |
| dpConfigLunaTable You can use a network-attached SafeNet Luna Network HSM appliance as the
HSM to provide secure storage for RSA keys and accelerate RSA operations
remotely. The configuration of th… | table | - | .1.3.6.1.4.1.14685.3.2.278 |
| dpConfigLunaPartitionTable The SafeNet Luna Network HSM appliance stores the RSA keys in independent
partitions. The configuration of the Luna HSM partition specifies the
partition that the DataPower Gatewa… | table | - | .1.3.6.1.4.1.14685.3.2.279 |
| dpConfigSNMPSettingsTable Use this page to establish SNMP connectivity to the device, and to set
values used by SNMP. | table | - | .1.3.6.1.4.1.14685.3.2.28 |
| dpConfigConfigSequenceTable A sequence of configuration files to load after the start-up
configuration. By default, changes on the configuration files are
automatically detected and reloaded. | table | - | .1.3.6.1.4.1.14685.3.2.280 |
| dpConfigLunaHAGroupTable An HA group on the SafeNet Luna Network HSM appliance allows you to define
multiple Luna HSM partitions as a group for load balancing and failover. | table | - | .1.3.6.1.4.1.14685.3.2.285 |
| dpConfigLunaHASettingsTable Defines the high availability (HA) settings for the SafeNet Luna Network
HSM HA group. | table | - | .1.3.6.1.4.1.14685.3.2.286 |
| dpConfigRADIUSSettingsTable Global RADIUS configuration | table | - | .1.3.6.1.4.1.14685.3.2.29 |
| dpConfigCRLFetchTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.3 |
| dpConfigUserGroupTable Create or edit user groups and their access privileges. | table | - | .1.3.6.1.4.1.14685.3.2.30 |
| dpConfigWAXHNProxyTable WebSphere Application Acceleration for Hybrid Networks (WAXHN). Configure
the WAXHN application proxy before you activate the WAXHN feature. The DNS
settings must be configured be… | table | - | .1.3.6.1.4.1.14685.3.2.300 |
| dpConfigHNApplicationTable Specifies the applications accelerated as part of the WebSphere
Application Accelerator for Hybrid Networks (WAXHN). | table | - | .1.3.6.1.4.1.14685.3.2.301 |
| dpConfigCloudGatewayServiceTable Cloud Gateway services are used with IBM Cloud Integration Services to
secure traffic from cloud-based applications to enterprise applications or
data sources. The Cloud Gateway s… | table | - | .1.3.6.1.4.1.14685.3.2.302 |
| dpConfigCloudConnectorServiceTable Creates a Cloud Connector service, which is a type of SSL forwarder. This
service can be used with a Cloud Gateway Service to secure traffic from
cloud-based clients to enterprise… | table | - | .1.3.6.1.4.1.14685.3.2.303 |
| dpConfigJSONSettingsTable The JSON settings specify constraints for parsing JSON messages. JSON
settings work in conjunction with the parser limits specified in the XML
Manager. The more restrictive limits… | table | - | .1.3.6.1.4.1.14685.3.2.308 |
| dpConfigIPMulticastTable IP Multicast mode defines the properties for the multicast configuration
used to transmit and receive peering update messages. | table | - | .1.3.6.1.4.1.14685.3.2.309 |
| dpConfigShellAliasTable The Shell Alias command is deprecated. Creates a user-defined macro that
runs the specified sequence of commands when invoked from the CLI. You can
use the GUI to create and modif… | table | - | .1.3.6.1.4.1.14685.3.2.31 |
| dpConfigDeploymentPolicyParametersBindingTable Configuration to persist the values of the deployment policy variables. | table | - | .1.3.6.1.4.1.14685.3.2.310 |
| dpConfigLDAPConnectionPoolTable The LDAP Connection Pool settings specify the LDAP connection pool to use. | table | - | .1.3.6.1.4.1.14685.3.2.311 |
| dpConfigMPGWErrorHandlingPolicyTable A Multi-Protocol gateway error policy consists of one or more error
actions. A service runs an error action depending on whether or not a
corresponding matching rule selects the a… | table | - | .1.3.6.1.4.1.14685.3.2.312 |
| dpConfigMPGWErrorActionTable Define how the Multi-Protocol gateway handles errors and generates error
responses to the client. | table | - | .1.3.6.1.4.1.14685.3.2.313 |
| dpConfigLanguageTable The available languages. Before the appliance can support a language, its
administrative state must be enabled. When a language is enable, you can
set it as the system locale in t… | table | - | .1.3.6.1.4.1.14685.3.2.314 |
| dpConfigDomainAvailabilityTable Domain Availability monitors the services within the domain. If the
operational state of any service in the domain is in the down state, then
the operational state for Domain Avai… | table | - | .1.3.6.1.4.1.14685.3.2.315 |
| dpConfigGeneratedPolicyTable The Generated Policy consists of generated configuration objects, such as
Processing Rules. Generated configuration objects are automatically
created based on the policy associate… | table | - | .1.3.6.1.4.1.14685.3.2.316 |
| dpConfigXSLCoprocServiceTable The XSL Coprocessor service is deprecated. Creates an XSL Coprocessor. An
XSL Coprocessor accepts input not from a client, as in XSL Proxy or XML
Firewall operation, but from a Ja… | table | - | .1.3.6.1.4.1.14685.3.2.32 |
| dpConfigPasswordMapTable The Password Map, also known as a password-to-alias map, provides the
mapping of aliases to passwords. The alias is a publicly known reference
that is included in configuration fi… | table | - | .1.3.6.1.4.1.14685.3.2.320 |
| dpConfigAAAJWTValidatorTable The JSON Web Token (JWT) Validator specifies credentials and different
methods to validate a JWT. | table | - | .1.3.6.1.4.1.14685.3.2.321 |
| dpConfigAAAJWTGeneratorTable The JSON Web Token (JWT) Generator specifies the JWT content and the
cryptographic methods, such as signing and encryption methods, used for
generating a JWT during the AAA postpr… | table | - | .1.3.6.1.4.1.14685.3.2.322 |
| dpConfigTelnetServiceTable Telnet services on the appliance are Telnet handlers. They are available
for compatibility with earlier versions. A Telnet handler supports
client-initiated access to the CLI. Tel… | table | - | .1.3.6.1.4.1.14685.3.2.33 |
| dpConfigLinkAggregationTable A link aggregation interface combines multiple Ethernet ports. When
combined and used in parallel, the aggregate interface increases link
speed beyond a single Ethernet port. Beca… | table | - | .1.3.6.1.4.1.14685.3.2.333 |
| dpConfigCookieAttributePolicyTable Cookie attribute policy manages pre-defined and custom attributes of a
cookie. | table | - | .1.3.6.1.4.1.14685.3.2.334 |
| dpConfigISAMReverseProxyTable A DataPower appliance can support multiple Access Manager Reverse Proxy
instances per domain. | table | - | .1.3.6.1.4.1.14685.3.2.335 |
| dpConfigISAMReverseProxyJunctionTable An Access Manager junction logically combines the Web space of the Web
application server with the Web space of the Access Manager Reverse Proxy
server, resulting in a unified vie… | table | - | .1.3.6.1.4.1.14685.3.2.336 |
| dpConfigISAMRuntimeTable Each DataPower appliance domain can include a single Access Manager
Runtime configuration. Each Access Manager Runtime is configured
independently against a remote IBM Security Ac… | table | - | .1.3.6.1.4.1.14685.3.2.337 |
| dpConfigPasswordAliasTable The Password Map Alias provides the mapping of an alias to a plaintext
password. The alias is a publicly known reference that is included in
configuration files and exports. With … | table | - | .1.3.6.1.4.1.14685.3.2.338 |
| dpConfigCryptoSSKeyTable A shared secret key is a sequence of characters that is pre-shared between
users for use with symmetric encryption. | table | - | .1.3.6.1.4.1.14685.3.2.34 |
| dpConfigAuditLogTable The audit log settings control the configuration of the audit log of the
system. The audit log configuration can be specified to keep a number of
rotations of a specific size. Thi… | table | - | .1.3.6.1.4.1.14685.3.2.340 |
| dpConfigJWERecipientTable JWE recipient object includes several values required by the JWE JSON
Serialization object. | table | - | .1.3.6.1.4.1.14685.3.2.345 |
| dpConfigJOSESignatureIdentifierTable JOSE Signature Identifier object for the JSON Web Verify. | table | - | .1.3.6.1.4.1.14685.3.2.346 |
| dpConfigJWSSignatureTable JWS signature object. | table | - | .1.3.6.1.4.1.14685.3.2.347 |
| dpConfigJWEHeaderTable JWE header object. | table | - | .1.3.6.1.4.1.14685.3.2.348 |
| dpConfigJOSERecipientIdentifierTable JOSE Recipient Identifier object for the JSON Web Decrypt. | table | - | .1.3.6.1.4.1.14685.3.2.349 |
| dpConfigMessageMonitorTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.35 |
| dpConfigSecureGatewayClientTable The Secure Gateway client creates a secure tunnel to IBM Cloud for
establishing TCP/IP communication with backend systems. | table | - | .1.3.6.1.4.1.14685.3.2.350 |
| dpConfigCacheGridTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.351 |
| dpConfigWXSGridTable The configuration of an eXtreme Scale Grid defines the connection details
to an eXtreme Scale grid in an eXtreme Scale collective. To define this
configuration, you must define th… | table | - | .1.3.6.1.4.1.14685.3.2.352 |
| dpConfigDomainSettingsTable The Domain Settings configuration provides properties to domain-specific
characteristics when you save changes to the persisted configuration. | table | - | .1.3.6.1.4.1.14685.3.2.353 |
| dpConfigGWScriptSettingsTable You can configure the following GatewayScript settings: Whether to freeze
the GatewayScript built-in objects. Freeze means preventing the
modification of existing property attribu… | table | - | .1.3.6.1.4.1.14685.3.2.358 |
| dpConfigAPICollectionTable An API collection is a logical partition of an API Gateway that packages
the plans and subscribers to make APIs available to a specific group of
clients. An API collection in the … | table | - | .1.3.6.1.4.1.14685.3.2.359 |
| dpConfigURLRewritePolicyTable Configure/Edit URL Rewrite Policies | table | - | .1.3.6.1.4.1.14685.3.2.36 |
| dpConfigAPIGatewayTable An API Gateway matches the API to process the API request and routes the
request to the matched API. | table | - | .1.3.6.1.4.1.14685.3.2.360 |
| dpConfigAPIDefinitionTable Configure a REST API definition that uses HTTP requests to GET, PUT, POST
and DELETE data. | table | - | .1.3.6.1.4.1.14685.3.2.361 |
| dpConfigAPIPathTable An API Path configuration describes the operations that are available on a
single path. | table | - | .1.3.6.1.4.1.14685.3.2.362 |
| dpConfigAPIOperationTable An API operation configuration describes the actions to perform against
the resource. | table | - | .1.3.6.1.4.1.14685.3.2.363 |
| dpConfigAPIPlanTable An API is exposed for access through an API plan. An API Plan packages a
list of APIs and defines the rate limit schemes to enforce to access the
APIs. By default, the rate limit … | table | - | .1.3.6.1.4.1.14685.3.2.364 |
| dpConfigAPISecurityDefinitionTable The API Security Definition configuration specifies the security schemes
that are available to be used to secure access to the API. | table | - | .1.3.6.1.4.1.14685.3.2.365 |
| dpConfigAPISecurityAPIKeyTable An API key security definition defines the credentials that an API client
must provide to the API Gateway to identify itself when calling the API
operations. You can require that … | table | - | .1.3.6.1.4.1.14685.3.2.366 |
| dpConfigAPISecurityOAuthTable An API OAuth security definition defines the applicable settings for an
OAuth provider. | table | - | .1.3.6.1.4.1.14685.3.2.368 |
| dpConfigAPISecurityRequirementTable An API Security Requirement configuration defines the required security
schemes that an API request must pass to execute this operation. Specify
the security requirement by select… | table | - | .1.3.6.1.4.1.14685.3.2.369 |
| dpConfigSSLProxyProfileTable The SSL proxy profile is deprecated. To secure the connections, use the
SSL client profile and SSL server profile or SSL SNI server profile based
on the role of the appliance. An … | table | - | .1.3.6.1.4.1.14685.3.2.37 |
| dpConfigControlListTable A control list uses a value-matching pattern to determine whether values
are on the whitelist or blacklist. When on the whitelist, the following
behavior applies. A whitelist entr… | table | - | .1.3.6.1.4.1.14685.3.2.370 |
| dpConfigAPILDAPRegistryTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.371 |
| dpConfigAPIRuleTable Configure and manage the API rule. An API rule completes the processing of
API requests or completes the operations that are required by the API
requests. | table | - | .1.3.6.1.4.1.14685.3.2.372 |
| dpConfigAPISecurityOAuthReqTable An OAuth security requirement defines the allowed scopes for controlling
access to APIs or operations through the token-based OAuth protocol. By
using an OAuth token, a user can g… | table | - | .1.3.6.1.4.1.14685.3.2.373 |
| dpConfigGWSRemoteDebugTable Modify the connection details for a remote GatewayScript debugger. This
configuration defines the local GatewayScript debug endpoint for remote
debugging. | table | - | .1.3.6.1.4.1.14685.3.2.374 |
| dpConfigAssemblyActionUserSecurityTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.376 |
| dpConfigAPISecurityBasicAuthTable A basic authentication security definition selects a user registry to
authenticate accesses to the API operations. When you use basic
authentication, API users must provide a vali… | table | - | .1.3.6.1.4.1.14685.3.2.377 |
| dpConfigAPISchemaTable An API schema configuration defines schemas to validate JSON, XML, WSDL,
or SOAP messages for an API path or an API operation. | table | - | .1.3.6.1.4.1.14685.3.2.378 |
| dpConfigAPIUserRegistryTable The API user registry specifies the authentication mechanism to validate
credentials. | table | - | .1.3.6.1.4.1.14685.3.2.379 |
| dpConfigHTTPProxyServiceTable Defines an HTTP Proxy Service. | table | - | .1.3.6.1.4.1.14685.3.2.38 |
| dpConfigAPIAuthURLRegistryTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.380 |
| dpConfigAssemblyActionClientSecurityTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.381 |
| dpConfigServiceTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.39 |
| dpConfigHTTPServiceTable Creates an HTTP server. This server delivers documents stored on the local
system. | table | - | .1.3.6.1.4.1.14685.3.2.4 |
| dpConfigRestMgmtInterfaceTable Configure the REST management interface. | table | - | .1.3.6.1.4.1.14685.3.2.400 |
| dpConfigSecureBackupModeTable Sets the backup operational mode. This mode controls whether a
secure-backup is allowed. After this mode is set, it cannot be changed.
Operational modes are set the first time the… | table | - | .1.3.6.1.4.1.14685.3.2.402 |
| dpConfigAPIConnectGatewayServiceTable The API Connect Gateway Service defines the connection to API Connect and
settings to use for creating the gateway for service. When an API Connect
Gateway Service is configured a… | table | - | .1.3.6.1.4.1.14685.3.2.403 |
| dpConfigCryptoFWCredTable The set of crypto credentials (private keys, shared secret keys, and
certificates) usable by an xmlfirewall when calling security extension
functions to perform actions such as en… | table | - | .1.3.6.1.4.1.14685.3.2.41 |
| dpConfigXMLFirewallServiceTable Create or edit an XML Firewall on local IP/port (device address and port).
This firewall may communicate with a dynamically identified server (or
servers), a static back end serve… | table | - | .1.3.6.1.4.1.14685.3.2.42 |
| dpConfigCryptoKeyTable The private key portion of a private/public key pair, as for RSA or DSA. | table | - | .1.3.6.1.4.1.14685.3.2.43 |
| dpConfigCryptoCertificateTable The public key portion of a private/public key pair, as for RSA or DSA,
plus the certificate with which the key pair is used. | table | - | .1.3.6.1.4.1.14685.3.2.44 |
| dpConfigCryptoIdentCredTable An identification set consisting of a certificate (which contains a public
key) and the corresponding private key. The identification set is used as
the identity of an sslproxy, a… | table | - | .1.3.6.1.4.1.14685.3.2.45 |
| dpConfigStandaloneStandbyControlInterfaceTable There is a StandaloneStandbyControlInterface for each kernel interface
that is capable of being used with StandaloneStandbyControl. This is the
interface being referred to in Stan… | table | - | .1.3.6.1.4.1.14685.3.2.450 |
| dpConfigStandaloneStandbyControlTable The standby configuration defines the policies for the group that this
interface is a member. A standby group is the collection of interfaces on
different appliances in the multic… | table | - | .1.3.6.1.4.1.14685.3.2.451 |
| dpConfigTenantTable Modify the connection details for a tenant. Each tenant and the landlord
have different management interfaces and a different quota enforcement
server. When you define the address… | table | - | .1.3.6.1.4.1.14685.3.2.452 |
| dpConfigSocialLoginPolicyTable DataPower can act as an OpenID Connect client. In this case, a social
login policy enables DataPower to redirect the user to a social login
provider like Google for user authentic… | table | - | .1.3.6.1.4.1.14685.3.2.455 |
| dpConfigEBMS3SourceProtocolHandlerTable The configuration for an ebMS3 protocol handler. | table | - | .1.3.6.1.4.1.14685.3.2.456 |
| dpConfigCryptoValCredTable A validation credentials list is used to authenticate certificates that
are received from SSL peers. It can also be used to validate certificates
that are used in digital signatur… | table | - | .1.3.6.1.4.1.14685.3.2.46 |
| dpConfigDFDLSettingsTable The DFDL settings specify constraints for parsing and serializing binary
data, where the data is modeled by a DFDL schema. | table | - | .1.3.6.1.4.1.14685.3.2.460 |
| dpConfigParseSettingsTable Specifies the constraints for parsing document. The set constraints
overwrite the parser limits that are specified in the XML Manager. | table | - | .1.3.6.1.4.1.14685.3.2.461 |
| dpConfigAccessProfileTable Create or edit an access profile. | table | - | .1.3.6.1.4.1.14685.3.2.462 |
| dpConfigCryptoProfileTable A crypto profile describes a set of configuration information for creating
SSL connections. | table | - | .1.3.6.1.4.1.14685.3.2.47 |
| dpConfigLogTargetTable Log targets capture messages that are posted by the various objects and
services that are running on the appliance. Target types enable additional
capabilities that include rotati… | table | - | .1.3.6.1.4.1.14685.3.2.48 |
| dpConfigSSHServiceTable Modify the configuration of the SSH server. | table | - | .1.3.6.1.4.1.14685.3.2.49 |
| dpConfigStatisticsTable Use this page to establish Statistics settings. Statistics must be enabled
for some of the monitors to work correctly. | table | - | .1.3.6.1.4.1.14685.3.2.5 |
| dpConfigCryptoTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.50 |
| dpConfigILMTScannerTable For DataPower Gateway for VMware, you can create IBM License Metric Tool
packages on a schedule or on demand. Independent of how you create
packages, these packages with the scan … | table | - | .1.3.6.1.4.1.14685.3.2.500 |
| dpConfigQuotaEnforcementServerTable On each DataPower appliance, you configure the quota enforcement server to
store the thresholds and associated metadata in memory or persist them on
the RAID volume. The quota enf… | table | - | .1.3.6.1.4.1.14685.3.2.504 |
| dpConfigSSHServerProfileTable Modify the configuration of the SSH server. #b#Warning#/b#: You must
reboot the system for the changes to take effect. | table | - | .1.3.6.1.4.1.14685.3.2.505 |
| dpConfigQuotaEnforcementMatchClassTable Quota enforcement match class. | table | - | .1.3.6.1.4.1.14685.3.2.506 |
| dpConfigQuotaEnforcementGroupClassTable Quota enforcement group class. | table | - | .1.3.6.1.4.1.14685.3.2.507 |
| dpConfigQuotaEnforcementAlgorithmTable Quota enforcement algorithm. | table | - | .1.3.6.1.4.1.14685.3.2.508 |
| dpConfigQuotaEnforcementScheduleTable Quota enforcement schedule. | table | - | .1.3.6.1.4.1.14685.3.2.509 |
| dpConfigWebGUITable Modify the configuration of the web management service. | table | - | .1.3.6.1.4.1.14685.3.2.51 |
| dpConfigSSHDomainClientProfileTable Modify the list of supported SSH cipher suites for the domain. | table | - | .1.3.6.1.4.1.14685.3.2.510 |
| dpConfigQuotaEnforcementPolicyGroupTable Quota enforcement policy group. | table | - | .1.3.6.1.4.1.14685.3.2.511 |
| dpConfigQuotaEnforcementPolicyBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.512 |
| dpConfigQuotaEnforcementActionTable Quota enforcement action. | table | - | .1.3.6.1.4.1.14685.3.2.513 |
| dpConfigQuotaEnforcementPolicyTable Quota enforcement policy. | table | - | .1.3.6.1.4.1.14685.3.2.514 |
| dpConfigEventlogTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.52 |
| dpConfigGatewayPeeringTable The gateway peering configuration can work in standalone or in peer group
mode. Standalone mode should be used for only development or testing
purposes. When you enable peer group… | table | - | .1.3.6.1.4.1.14685.3.2.526 |
| dpConfigAccessControlTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.53 |
| dpConfigMessageFlowControlTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.54 |
| dpConfigMQConfigurationTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.55 |
| dpConfigDeviceSettingsTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.56 |
| dpConfigDeviceManagementServiceTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.57 |
| dpConfigNetworkConfigurationTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.58 |
| dpConfigLogLabelTable Allows for the configuration of custom log categories | table | - | .1.3.6.1.4.1.14685.3.2.59 |
| dpConfigTraceTargetTable Allows the configuration of a trace target. | table | - | .1.3.6.1.4.1.14685.3.2.6 |
| dpConfigMgmtInterfaceTable Modify the configuration of the XML management interface. This interface
is described in the store:///xml-mgmt.wsdl file in the 'default' domain. | table | - | .1.3.6.1.4.1.14685.3.2.60 |
| dpConfigStylePolicyActionBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.600 |
| dpConfigAssemblyActionBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.601 |
| dpConfigAssemblyActionTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.602 |
| dpConfigAssemblyLogicTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.603 |
| dpConfigAPIExecuteTable An API execute action executes the assembly rule that is identified at the
runtime for the incoming API request. | table | - | .1.3.6.1.4.1.14685.3.2.605 |
| dpConfigAPIResultTable An API result action prepares responses to the client based on the result
from the API execute action. | table | - | .1.3.6.1.4.1.14685.3.2.607 |
| dpConfigAssemblyLogicSwitchTable The switch action evaluates a list of conditions and runs the API rule
that is associated with the first condition that matches the API context. | table | - | .1.3.6.1.4.1.14685.3.2.609 |
| dpConfigMessageMatchingTable Message Matching determines what messages will be monitored by any monitor
that uses the Message Matching object. It is a definition of the traffic
flow that is monitored. To capt… | table | - | .1.3.6.1.4.1.14685.3.2.61 |
| dpConfigAssemblyTable An assembly specifies the API rule to apply to the API call and how to
handle errors during the assembly execution. The API rule for the assembly
comprises only assembly actions t… | table | - | .1.3.6.1.4.1.14685.3.2.610 |
| dpConfigAssemblyActionInvokeTable You use the invoke action to call another service from within your
assembly. | table | - | .1.3.6.1.4.1.14685.3.2.611 |
| dpConfigAssemblyActionSetVarTable You use the set variable action for setting, adding, or clearing an API
context variable within your assembly. | table | - | .1.3.6.1.4.1.14685.3.2.612 |
| dpConfigAssemblyActionThrowTable You can customize an error in the throw action. When the throw action is
triggered, the custom error is thrown. After the throw action is
triggered, the API Gateway does not run s… | table | - | .1.3.6.1.4.1.14685.3.2.613 |
| dpConfigAPIRoutingTable An API routing action examines the information that is carried in the API
request and matches the API and operation to respond to the request. | table | - | .1.3.6.1.4.1.14685.3.2.614 |
| dpConfigAPISecurityTable An API security action enforces the security requirements that are defined
for the target API or operation. | table | - | .1.3.6.1.4.1.14685.3.2.615 |
| dpConfigAPIRateLimitTable An API rate limit action enforces the rate limit schemes that are defined
for an API or operation. | table | - | .1.3.6.1.4.1.14685.3.2.616 |
| dpConfigAssemblyActionXml2JsonTable You use the XML to JSON action to convert the payload of an API message
from XML format to equivalent JSON format. | table | - | .1.3.6.1.4.1.14685.3.2.617 |
| dpConfigAPIActionTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.618 |
| dpConfigAssemblyActionXSLTTable You use the XSLT action to run a stylesheet from within your assembly.
This action is not supported in IBM Cloud. Any assembly that includes it
will fail. | table | - | .1.3.6.1.4.1.14685.3.2.619 |
| dpConfigMessageTypeTable On-Line Help for Message Types | table | - | .1.3.6.1.4.1.14685.3.2.62 |
| dpConfigAssemblyActionGatewayScriptTable Use the GatewayScript action to run a GatewayScript file. This action is
not supported in IBM Cloud. Any assembly that includes it will fail. | table | - | .1.3.6.1.4.1.14685.3.2.620 |
| dpConfigAPIClientIdentificationTable An API client identification action examines the API key credentials that
are carried in the API request and validates the subscription of the
client. | table | - | .1.3.6.1.4.1.14685.3.2.621 |
| dpConfigAssemblyActionMapTable A map action applies data transformations to the assembly flow according
to a specified map file. The map file is a JSON file that defines all
mapping operations. Prepare a valid … | table | - | .1.3.6.1.4.1.14685.3.2.622 |
| dpConfigAssemblyActionJWTValidateTable The validate JSON Web Token (JWT) action specifies credentials and methods
to validate a JWT in the request. The following guidelines apply. All
claims that are specified in the v… | table | - | .1.3.6.1.4.1.14685.3.2.623 |
| dpConfigAssemblyActionParseTable You use the parse action to parse a request or a message as XML or JSON,
or parse binary data into a binary large object (BLOB). | table | - | .1.3.6.1.4.1.14685.3.2.624 |
| dpConfigAPICORSTable An API CORS action handles cross-origin resource sharing (CORS) requests
that are required by the API. | table | - | .1.3.6.1.4.1.14685.3.2.625 |
| dpConfigOperationRateLimitTable An API Operation Rate Limit configuration defines the operation-specific
rate limit scheme. By default, the rate limit scheme setting for the plan
applies to all operations in the… | table | - | .1.3.6.1.4.1.14685.3.2.626 |
| dpConfigAnalyticsEndpointTable Configure an analytics endpoint to forward the logged API events to a
remote Elasticsearch server for display and analysis. | table | - | .1.3.6.1.4.1.14685.3.2.627 |
| dpConfigAssemblyActionJWTGenerateTable The generate JSON Web Token (JWT) action generates JWT claims and
specifies the cryptographic material for generating a JWT during API
processing. | table | - | .1.3.6.1.4.1.14685.3.2.628 |
| dpConfigAssemblyActionJson2XmlTable You use the JSON to XML action to convert the payload of an API message
from JSON format to equivalent XML format. | table | - | .1.3.6.1.4.1.14685.3.2.629 |
| dpConfigCountMonitorTable On-Line Help for Message-Count Monitors | table | - | .1.3.6.1.4.1.14685.3.2.63 |
| dpConfigAssemblyActionOAuthTable An OAuth action performs the requested OAuth flow based on the defined
OAuth provider settings. | table | - | .1.3.6.1.4.1.14685.3.2.630 |
| dpConfigDurationMonitorTable On-Line Help for Message-Duration Monitors. Duration Monitors observe the
duration, or amount of time, taken to process submissions. | table | - | .1.3.6.1.4.1.14685.3.2.64 |
| dpConfigOAuthProviderSettingsTable An OAuth provider settings configuration defines how a client application
is authorized to access resources on behalf of the resource owner. | table | - | .1.3.6.1.4.1.14685.3.2.640 |
| dpConfigAPISecurityTokenManagerTable The security token manager provides storage configuration to security
objects such as OAuth Provider and User Security. | table | - | .1.3.6.1.4.1.14685.3.2.641 |
| dpConfigAssemblyActionValidateTable You use the assembly validate action to validate payloads against a
schema. | table | - | .1.3.6.1.4.1.14685.3.2.642 |
| dpConfigAPIDebugProbeTable This domain-specific configuration defines the settings for the probe that
you can use to troubleshoot the processing of assembly actions by the API
Gateway. | table | - | .1.3.6.1.4.1.14685.3.2.643 |
| dpConfigAPIApplicationTypeTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.644 |
| dpConfigAssemblyFunctionTable An assembly function augments the actions performed by the API Gateway.
You can implement an assembly function in one of the following ways.
Define an assembly function to add cus… | table | - | .1.3.6.1.4.1.14685.3.2.645 |
| dpConfigAssemblyActionFunctionCallTable An assembly function call action specifies an assembly function that
contains custom logic to add to an assembly. | table | - | .1.3.6.1.4.1.14685.3.2.646 |
| dpConfigGatewayPeeringManagerTable The gateway peering manager provides storage configuration to rate limit,
subscription, and debug probe objects. | table | - | .1.3.6.1.4.1.14685.3.2.648 |
| dpConfigAssemblyActionLogTable An assembly log action writes transaction data to the API context to send
to the analytics server. The API activity logging settings specified in
the API definition determine the … | table | - | .1.3.6.1.4.1.14685.3.2.649 |
| dpConfigFilterActionTable On-Line Help for Monitor Policies (Filter Actions) | table | - | .1.3.6.1.4.1.14685.3.2.65 |
| dpConfigAssemblyActionRateLimitTable An assembly rate limit action applies rate limiting, burst limiting, count
limiting, or any combination of these to subsequent actions in the
assembly. This action is not supporte… | table | - | .1.3.6.1.4.1.14685.3.2.650 |
| dpConfigAssemblyActionRedactTable You use the Redact action to redact or remove specified fields from the
request body, the response body, or the activity logs. | table | - | .1.3.6.1.4.1.14685.3.2.651 |
| dpConfigHTTPInputConversionMapTable This defines the rules for handling HTTP to XML conversion of form values
in an HTTP GET or POST of a form. There are different conversion
(Encoding) rules for the values. They co… | table | - | .1.3.6.1.4.1.14685.3.2.66 |
| dpConfigCompileOptionsPolicyTable Configure/Edit Compile Option Policies | table | - | .1.3.6.1.4.1.14685.3.2.68 |
| dpConfigXPathRoutingMapTable An XPath Routing Map matches XPath expressions with corresponding
destination URLs. When the XPath expression evaluates to true when applied
to the message submitted, the target d… | table | - | .1.3.6.1.4.1.14685.3.2.69 |
| dpConfigNTPServiceTable Configure remote NTP (Network Time Protocol) server. This allows the
automatic synchronization of the system clock. | table | - | .1.3.6.1.4.1.14685.3.2.7 |
| dpConfigSchemaExceptionMapTable This object describes exceptions to an XML Schema by identifying elements
of the schema that may be encrypted in an instance document. When Schema
Validation is performed on the d… | table | - | .1.3.6.1.4.1.14685.3.2.70 |
| dpConfigReserved71Table Table. | table | - | .1.3.6.1.4.1.14685.3.2.71 |
| dpConfigDocumentCryptoMapTable A Document Crypto Map indicates which elements, of a complete schema, to
encrypt or decrypt. The indicated element or elements may also be signed. | table | - | .1.3.6.1.4.1.14685.3.2.72 |
| dpConfigTAMTable A DataPower appliance can support multiple IBM Security Access Manager
registry types: LDAP or Microsoft Active Directory. Support for the
registry type is established for each Ac… | table | - | .1.3.6.1.4.1.14685.3.2.73 |
| dpConfigDomainTable An application domain contains the resources that support DataPower
services. A DataPower supports multiple application domains. Application
domains can share read access to files… | table | - | .1.3.6.1.4.1.14685.3.2.74 |
| dpConfigTimeSettingsTable The time zone for the appliance. The time zone affects the time that the
appliance displays. All time stamps in the CLI and GUI use this time zone.
#b#Note: #/b#The appliance cloc… | table | - | .1.3.6.1.4.1.14685.3.2.75 |
| dpConfigDynamicXMLContentMapTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.77 |
| dpConfigDynamicStylesheetTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.78 |
| dpConfigDynamicSchemaTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.79 |
| dpConfigThrottlerTable This setting throttles, or disallows, traffic when the total memory
available to the system reaches the thresholds established here. | table | - | .1.3.6.1.4.1.14685.3.2.8 |
| dpConfigAccessControlListTable An access control list (ACL) consists of a sequence of allow and deny
clauses. Each clause identifies an IP address or range of addresses that
allow or deny access to a service. A… | table | - | .1.3.6.1.4.1.14685.3.2.80 |
| dpConfigImportPackageTable Import Package allows the system to import a configuration package from an
external server, such as a centralized configuration server, when the
configuration of the DataPower sys… | table | - | .1.3.6.1.4.1.14685.3.2.81 |
| dpConfigMQhostTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.82 |
| dpConfigMQproxyTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.83 |
| dpConfigLoadBalancerGroupTable The DataPower device distributes traffic to members of a Load Balancer
Group. These are back end servers and not additional DataPower devices. A
Load Balancer Group lists members … | table | - | .1.3.6.1.4.1.14685.3.2.84 |
| dpConfigRBMSettingsTable Manage role-based management (RBM) settings: RBM, password policy, and
account policy RBM consists of the following capabilities: Authenticating
users, evaluating the access profi… | table | - | .1.3.6.1.4.1.14685.3.2.85 |
| dpConfigProductInsightsTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.850 |
| dpConfigIncludeConfigTable Allows the inclusion of external configuration files during startup. The
included configuration files may reside on the local device or on a remote
host. | table | - | .1.3.6.1.4.1.14685.3.2.86 |
| dpConfigCertMonitorTable The Certificate Monitor periodically checks all X.509 certificates stored
on the device for expiration. The monitor automatically creates a log
message for each certificate that i… | table | - | .1.3.6.1.4.1.14685.3.2.87 |
| dpConfigHostAliasTable A host alias is a map between a local IP address to a local alias. The
host alias is resolved like a static host entry. Host aliases provide a
level of abstraction between concret… | table | - | .1.3.6.1.4.1.14685.3.2.88 |
| dpConfigStylePolicyTable Create, Edit or Delete a Processing Policy. A policy consists of one or
more Processing Rules. Rules execute depending upon the direction of the
message and on whether or not a co… | table | - | .1.3.6.1.4.1.14685.3.2.9 |
| dpConfigAAAPolicyTable An AAA policy establishes the configuration to support the authentication
and authorization of users requesting resources from the back-end servers.
An AAA policy consists of the … | table | - | .1.3.6.1.4.1.14685.3.2.91 |
| dpConfigStylePolicyActionTable Define XSL filters and/or transformations | table | - | .1.3.6.1.4.1.14685.3.2.92 |
| dpConfigCryptoKerberosKDCTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.93 |
| dpConfigWebServiceMonitorTable Web Service SLM (Service Level Monitor) Object An SLM watches Web Services
traffic destined for the Endpoint URL defined in the Endpoint URL field
using the transport method defin… | table | - | .1.3.6.1.4.1.14685.3.2.94 |
| dpConfigWSGatewayTable A Web Service Proxy virtualizes application services described by WSDL
files. The Proxy provides alternate endpoint URLs, message validation,
service level monitoring and automati… | table | - | .1.3.6.1.4.1.14685.3.2.95 |
| dpConfigStylePolicyRuleBaseTable Table. | table | - | .1.3.6.1.4.1.14685.3.2.96 |
| dpConfigWSStylePolicyRuleTable Create, edit, or delete processing policy rules. Rules can also be created
and edited using a drag and drop interface by opening the Services menu
area on the left-hand navigation… | table | - | .1.3.6.1.4.1.14685.3.2.97 |
| dpConfigWSStylePolicyTable Create, Edit or Delete a Processing Policy. A policy consists of one or
more Processing Rules. Rules execute depending upon the direction of the
message and on whether or not a co… | table | - | .1.3.6.1.4.1.14685.3.2.98 |
| dpConfigWebServicesAgentTable The Web Services Management Agent provides manageability for Web Services
by providing status, metrics, and transaction history to external
management stations. | table | - | .1.3.6.1.4.1.14685.3.2.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dpConfigLLMMulticastTierGroupEntry Table row. | row | - | .1.3.6.1.4.1.14685.3.2.184.1 |