wtSeriControlPort
Com-Server-Intern-MIB ·
.1.3.6.1.4.1.5040.1.1.1.3.4.1.3
Object
column
mandatory
r/w
Integer32
TCP port number of the Com-Server's control port. In TCP client or TCP server mode this port allows to change settings like baud rate, parity etc. of the serial interface. The control port can be opened in addition to the data connection.
Context
- MIB
- Com-Server-Intern-MIB
- OID
.1.3.6.1.4.1.5040.1.1.1.3.4.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtSeriPortEntry
- Table
- wtSeriPortTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtSeriLocalPort mandatory Local TCP/UDP port number of the Com-Server port on which the Com-Server
accepts a TCP connection or which it used in TCP client mode or UDP mode as a
local port. | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.1 |
| wtSeriNetPckDelay mandatory This value indicates the minimum wait time in 10ms ticks of the Com-Server
after the arrival of serial data. After this time has expired, it packs the
data into a network packet… | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.10 |
| wtSeriFlushBuf mandatory If this switch is active (2), the serial buffer is flushed each time a
new connection is opened; any residual data which could not be sent (e.g.,
handshake stop of the serial te… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.4.1.11 |
| wtSeriTelnetEcho mandatory When opening a Telnet connection, there is negotiation on the network
side to determine who generates the echo of the characters sent by the
client. Either the client application … | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.4.1.12 |
| wtSeriPortMode mandatory This parameter specifies the mode of the Com-Server port. Depending
on which mode is set, the corresponding list of the relevant parameters
is available. If for example Upd mode … | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.4.1.2 |
| wtSeriPortState mandatory This value specifies the the connection state of the serial port.
0=Server mode, no connection
1=Server mode, active connection
2=Special mode, attempting to establish a connectio… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.4.1.4 |
| wtSeriRemotePort mandatory If the serial port has an active TCP or UDP connection, this value shows
the port number of the remote host. | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.5 |
| wtSeriRemoteIP mandatory If the serial port has an active TCP or UDP connection, this value shows
the IP address of the remote host. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.5040.1.1.1.3.4.1.6 |