frxNetPPPEs

Cisco90Series-MIB · .1.3.6.1.4.1.1570.1.4.1.1.15

MIB view Table view

Object

column mandatory RFC1155-SMICounter

Errored seconds caused by bad RFC-1973 (PPP) header.
Total number of seconds in which a frame with an
invalid RFC-1973 (PPP) header is received by this
channel unit on the network (T1) interface. Only frames
whose DLCI is addressed to a port that is set to PPP
protocol and is on this channel unit are counted.

Context

MIB: Cisco90Series-MIB
OID: .1.3.6.1.4.1.1570.1.4.1.1.15
Type: column
Access: readonly
Status: mandatory
Parent: frxChUEntry
Table: frxChUTable
Siblings: 15

Syntax

RFC1155-SMICounter

Source: RFC1155-SMICounter
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
frxChUIndex mandatory Channel Unit Number. This index is used to address a specific channel unit in a bank. For D4 channel banks this number is the same as the physical slot number 1-24	column	Integer32	`.1.3.6.1.4.1.1570.1.4.1.1.1`
frxNetHDLCEs mandatory Network Errored Seconds caused by HDLC aborts (7 or more ones in a row). Total number of seconds in which a frame with an HDLC abort is received by this channel unit on the networ…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.10`
frxNetCRCEs mandatory Network Errored Seconds caused by CRC errors. Total number of seconds in which a frame with a CRC error is received by this channel unit on the network (T1) interface. Only frames…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.11`
frxNetLinkEs mandatory Network Errored Seconds caused by Non-integral Bytes. Total number of seconds in which a frame with a non-integral number of bytes is received by this channel unit on the network …	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.12`
frxNetFrShEs mandatory Network Errored Seconds caused by Short Frames received. Total number of seconds in which a frame that is too short (less than 5 bytes) is received by this channel unit on the net…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.13`
frxNetFrLgEs mandatory Network Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received by this channel unit on the ne…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.14`
frxNetBufEs mandatory Errored Seconds caused by Buffer Overflow. Total number of seconds in which a frame received by this channel unit on the network (T1) interface was discarded due to insufficient b…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.16`
frxChUType mandatory Type of Cisco 90 Series channel unit installed.	column	Enumeration	`.1.3.6.1.4.1.1570.1.4.1.1.2`
frxChUVersion mandatory Cisco 90 Series channel unit version number.	column	Integer32	`.1.3.6.1.4.1.1570.1.4.1.1.3`
frxSigProtocol mandatory This is the type of Local In-channel Signaling used when the subscriber is running frame relay protocol. It is provided for future use. Set to 1 for T1.617 Annex-D	column	Enumeration	`.1.3.6.1.4.1.1570.1.4.1.1.4`
frxConfigSrc mandatory Source for configuring speed and protocol for each port. 1=Data rate and protocol set by DLCI assignment rules as reported by Annex-D. This option allows control of these bas…	column	Enumeration	`.1.3.6.1.4.1.1570.1.4.1.1.5`
frxDLCIAdLen mandatory The number of bytes used for the DLCI address. For future use. 1=two octets.	column	Enumeration	`.1.3.6.1.4.1.1570.1.4.1.1.6`
frxNetInOctets mandatory Total number of octets received by this channel unit from Frame Relay Switch (on the T1 interface) Only frames whose DLCI is addressed to a port on this channel unit are counted. …	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.7`
frxNetOutOctets mandatory Total number of octets transmitted to the Frame Relay Switch (on the T1 interface) by this channel unit. Annex-D and SNMP frames are not counted. CRC bytes are not counted	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.8`
frxNetBadFrames mandatory Total number of frames received on the network (T1) interface that are discarded by this channel unit. Possible reasons for discard are: Frame contained HDLC abort (7 or more o…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.1570.1.4.1.1.9`