frxChUEntry
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.4.1.1
Object
row
mandatory
A specific entry in the Cisco 90 Series Channel Unit Table. There is one entry for each Cisco 90 Series channel unit in the system. There are no entries for unused banks or empty channel unit slots
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.4.1.1- Type
- row
- Status
- mandatory
- Parent
- frxChUTable
- Table
- frxChUTable
- Children
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxChUIndex mandatory Channel Unit Number. This index is used to address a
specific channel unit in a bank. For D4 channel banks
this number is the same as the physical slot number 1-24 | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.1 |
| frxNetHDLCEs mandatory Network Errored Seconds caused by HDLC aborts (7 or more
ones in a row). Total number of seconds in which a frame
with an HDLC abort is received by this channel unit on
the networ… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.10 |
| frxNetCRCEs mandatory Network Errored Seconds caused by CRC errors.
Total number of seconds in which a frame with a CRC
error is received by this channel unit on the network
(T1) interface. Only frames… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.11 |
| frxNetLinkEs mandatory Network Errored Seconds caused by Non-integral Bytes.
Total number of seconds in which a frame with a non-integral
number of bytes is received by this channel unit on the
network … | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.12 |
| frxNetFrShEs mandatory Network Errored Seconds caused by Short Frames received.
Total number of seconds in which a frame that is too
short (less than 5 bytes) is received by this channel
unit on the net… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.13 |
| frxNetFrLgEs mandatory Network Errored Seconds caused by Long Frames received.
Total number of seconds in which a frame that is too
long (more than 8192 bytes) is received by this channel
unit on the ne… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.14 |
| frxNetPPPEs mandatory Errored seconds caused by bad RFC-1973 (PPP) header.
Total number of seconds in which a frame with an
invalid RFC-1973 (PPP) header is received by this
channel unit on the network… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.15 |
| frxNetBufEs mandatory Errored Seconds caused by Buffer Overflow.
Total number of seconds in which a frame received
by this channel unit on the network (T1) interface
was discarded due to insufficient b… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.16 |
| frxChUType mandatory Type of Cisco 90 Series channel unit installed. | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.2 |
| frxChUVersion mandatory Cisco 90 Series channel unit version number. | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.3 |
| frxSigProtocol mandatory This is the type of Local In-channel Signaling used
when the subscriber is running frame relay protocol.
It is provided for future use. Set to 1 for T1.617
Annex-D | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.4 |
| frxConfigSrc mandatory Source for configuring speed and protocol for each port.
1=Data rate and protocol set by DLCI assignment rules
as reported by Annex-D. This option allows control
of these bas… | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.5 |
| frxDLCIAdLen mandatory The number of bytes used for the DLCI address.
For future use. 1=two octets. | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.6 |
| frxNetInOctets mandatory Total number of octets received by this channel
unit from Frame Relay Switch (on the T1 interface)
Only frames whose DLCI is addressed to a port on
this channel unit are counted. … | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.7 |
| frxNetOutOctets mandatory Total number of octets transmitted to the Frame
Relay Switch (on the T1 interface) by this channel
unit. Annex-D and SNMP frames are not counted. CRC
bytes are not counted | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.8 |
| frxNetBadFrames mandatory Total number of frames received on the network (T1)
interface that are discarded by this channel unit.
Possible reasons for discard are:
Frame contained HDLC abort (7 or more o… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxBankIndex mandatory Channel Bank Di-group Number. This index is used to address
the various channel banks in the system. This number is the
same as the DLCI number used to communicate with the bank a… | column | Integer32 | .1.3.6.1.4.1.1570.1.3.1.1.1 |
| frxChUIndex mandatory Channel Unit Number. This index is used to address a
specific channel unit in a bank. For D4 channel banks
this number is the same as the physical slot number 1-24 | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.1 |