frxNetOutOctets
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.4.1.1.8
Object
Total number of octets transmitted to the Frame Relay Switch (on the T1 interface) by this channel unit. Annex-D and SNMP frames are not counted. CRC bytes are not counted
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.4.1.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- frxChUEntry
- Table
- frxChUTable
- Siblings
- 15
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxChUIndex mandatory Channel Unit Number. This index is used to address a
specific channel unit in a bank. For D4 channel banks
this number is the same as the physical slot number 1-24 | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.1 |
| frxNetHDLCEs mandatory Network Errored Seconds caused by HDLC aborts (7 or more
ones in a row). Total number of seconds in which a frame
with an HDLC abort is received by this channel unit on
the networ… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.10 |
| frxNetCRCEs mandatory Network Errored Seconds caused by CRC errors.
Total number of seconds in which a frame with a CRC
error is received by this channel unit on the network
(T1) interface. Only frames… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.11 |
| frxNetLinkEs mandatory Network Errored Seconds caused by Non-integral Bytes.
Total number of seconds in which a frame with a non-integral
number of bytes is received by this channel unit on the
network … | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.12 |
| frxNetFrShEs mandatory Network Errored Seconds caused by Short Frames received.
Total number of seconds in which a frame that is too
short (less than 5 bytes) is received by this channel
unit on the net… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.13 |
| frxNetFrLgEs mandatory Network Errored Seconds caused by Long Frames received.
Total number of seconds in which a frame that is too
long (more than 8192 bytes) is received by this channel
unit on the ne… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.14 |
| frxNetPPPEs mandatory Errored seconds caused by bad RFC-1973 (PPP) header.
Total number of seconds in which a frame with an
invalid RFC-1973 (PPP) header is received by this
channel unit on the network… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.15 |
| frxNetBufEs mandatory Errored Seconds caused by Buffer Overflow.
Total number of seconds in which a frame received
by this channel unit on the network (T1) interface
was discarded due to insufficient b… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.16 |
| frxChUType mandatory Type of Cisco 90 Series channel unit installed. | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.2 |
| frxChUVersion mandatory Cisco 90 Series channel unit version number. | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.3 |
| frxSigProtocol mandatory This is the type of Local In-channel Signaling used
when the subscriber is running frame relay protocol.
It is provided for future use. Set to 1 for T1.617
Annex-D | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.4 |
| frxConfigSrc mandatory Source for configuring speed and protocol for each port.
1=Data rate and protocol set by DLCI assignment rules
as reported by Annex-D. This option allows control
of these bas… | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.5 |
| frxDLCIAdLen mandatory The number of bytes used for the DLCI address.
For future use. 1=two octets. | column | Enumeration | .1.3.6.1.4.1.1570.1.4.1.1.6 |
| frxNetInOctets mandatory Total number of octets received by this channel
unit from Frame Relay Switch (on the T1 interface)
Only frames whose DLCI is addressed to a port on
this channel unit are counted. … | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.7 |
| frxNetBadFrames mandatory Total number of frames received on the network (T1)
interface that are discarded by this channel unit.
Possible reasons for discard are:
Frame contained HDLC abort (7 or more o… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.4.1.1.9 |