frxCdEsTh
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.6.4.1.3
Object
column
mandatory
r/w
Integer32
Current Day Errored Seconds threshold. This threshold is used for both the transmit and receive directions. When errors are detected that exceed this threshold and the corresponding bit in the frxAlertMask register is 0, the corresponding bit in the frxThCond register is set and a trap is generated (depending on the state of frxUPerfTrapEnable). Factory defaut is 100. Indexed by Bank.ChannelUnit.Port.Address
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.6.4.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- frxUThrEntry
- Table
- frxUThrTable
- Siblings
- 6
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxPAddrIndex mandatory This is the physical location where the performance
monitoring takes place. It may be set to localFrx(7)
to access and control PM values local to the Cisco 90
Series channel unit… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.4.1.1 |
| frxChEsTh mandatory Current Hour Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the correspond… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.2 |
| frxChSesTh mandatory Current Hour Severely Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the c… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.4 |
| frxCdSesTh mandatory Current Day Severely Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the co… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.5 |
| frxAlertMask mandatory 8-bit Alert Mask register. One bit for each threshold in
both directions. When set to 1, the corresponding threshold
crossing is ignored. When set to 0, the corresponding thresho… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.6 |
| frxThCond mandatory 8-bit Threshold Condition register. One bit for each
threshold in both directions. Set to 1 if the threshold
is exceeded and the corresponding bit in the frxAlertMask
register is… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.7 |