frxUThrEntry
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.6.4.1
Object
row
mandatory
A specific entry in the U-interface Performance Monitoring Threshold table. There is one entry for each port on each Cisco 90 Series channel unit in the system and one entry for each BRITE card extending those ports. There are no entries for unused banks or empty channel unit slots
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.6.4.1- Type
- row
- Status
- mandatory
- Parent
- frxUThrTable
- Table
- frxUThrTable
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxPAddrIndex mandatory This is the physical location where the performance
monitoring takes place. It may be set to localFrx(7)
to access and control PM values local to the Cisco 90
Series channel unit… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.4.1.1 |
| frxChEsTh mandatory Current Hour Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the correspond… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.2 |
| frxCdEsTh mandatory Current Day Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the correspondi… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.3 |
| frxChSesTh mandatory Current Hour Severely Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the c… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.4 |
| frxCdSesTh mandatory Current Day Severely Errored Seconds threshold. This
threshold is used for both the transmit and receive
directions. When errors are detected that exceed this
threshold and the co… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.5 |
| frxAlertMask mandatory 8-bit Alert Mask register. One bit for each threshold in
both directions. When set to 1, the corresponding threshold
crossing is ignored. When set to 0, the corresponding thresho… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.6 |
| frxThCond mandatory 8-bit Threshold Condition register. One bit for each
threshold in both directions. Set to 1 if the threshold
is exceeded and the corresponding bit in the frxAlertMask
register is… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.4.1.7 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxBankIndex mandatory Channel Bank Di-group Number. This index is used to address
the various channel banks in the system. This number is the
same as the DLCI number used to communicate with the bank a… | column | Integer32 | .1.3.6.1.4.1.1570.1.3.1.1.1 |
| frxChUIndex mandatory Channel Unit Number. This index is used to address a
specific channel unit in a bank. For D4 channel banks
this number is the same as the physical slot number 1-24 | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.1 |
| frxPortIndex mandatory Which subscriber port on the channel unit is
addressed. Ports are numbered from 0 to 3.
Some channel unit types have less than 4 ports. | column | Integer32 | .1.3.6.1.4.1.1570.1.5.2.1.1 |
| frxPAddrIndex mandatory This is the physical location where the performance
monitoring takes place. It may be set to localFrx(7)
to access and control PM values local to the Cisco 90
Series channel unit… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.4.1.1 |