frxBertBE
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.6.3.1.7
Object
BERT test block errors
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.6.3.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- frxUEocEntry
- Table
- frxUEocTable
- Siblings
- 8
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxTestPort mandatory This parameter indicates which subscriber port on the
channel unit to test. It has no effect until frxStartTest
is set to start the test. Only one port on a given channel
unit may… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.3.1.1 |
| frxTestType mandatory This parameter indicates the type of test to perform. It
has no effect until frxStartTest is set to start the test.
1=Set up a loopback and run a PN-2047 Bit Error Rate Test.
2=Ru… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.3.1.2 |
| frxLoopLoc mandatory This parameter indicates the location of the loopback or
the card that will send corrupt CRC. It has no effect
until frxStartTest is set to start the test. It has no
effect for a… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.3.1.3 |
| frxLoopCh mandatory This parameter indicates which channels to use for the
loopbackOnly and localLoopAllPorts test. It has no effect
until frxStartTest is set to start the test. Note that the
loopbac… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.3.1.4 |
| frxStartTest mandatory This parameter is used to start and stop the test.
frxTestPort, frxTestType, frxLoopLoc, and frxLoopCh should
be set up prior to starting the test.
1=stop test. 2=start test. | column | Enumeration | .1.3.6.1.4.1.1570.1.6.3.1.5 |
| frxBertRst mandatory This parameter may be used during a LoopbackAndBert test
or a BertOnly test to reset the frxBertBE counter. It
must be returned to the normal posiion to allow errors to
be counted… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.3.1.6 |
| frxBertTestTime mandatory BERT test time in 0.01 second increments | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.1570.1.6.3.1.8 |
| frxTestInProg mandatory Test in progress (1); Normal operation (2) | column | Enumeration | .1.3.6.1.4.1.1570.1.6.3.1.9 |