bladeDetailsEffectiveClockRate
CME-MIB ·
.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.4
Object
column
mandatory
OctetString
Blade Module Details Table Effective CPU Clock Rate applies to DPM
blades only. It displays processor's effective clock rate based
on sample interval. Note that some blades do not effective
clock rate. In this case, 'notApplicable' will be displayed.
NOTE: The effective clock rate are reported only on a primary slot when
a server blade spans multiple slots (e.g. double wide or
triple wide). For example if the blade is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not.
The effective clock rate are reported on slot 3 while 'notApplicable'
is displayed for slot 4.
Context
- MIB
- CME-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.4- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- bladeDetailsEntry
- Table
- bladeDetailsTable
- Siblings
- 11
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bladeDetailsIndex mandatory Blade Module Details Table Index. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.1 |
| bladeDetailsPcapMin mandatory Blade Module Details Table power capping Minimum value in watts.
The blade must support the advanced power management feature.
If the value of Pcap Min is 'notAppli… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.10 |
| bladeDetailsPcapGuaranteedMin mandatory Blade Module Details Table power capping Guaranteed Minimum value in watts.
The blade must support the advanced power management feature.
If the value of Pcap Guara… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.11 |
| bladeDetailsPcapMax mandatory Blade Module Details Table power capping Maximum value in watts.
The blade must support the advanced power management feature.
If the value is '<max1> Watts,<max2> … | column | OctetString | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.12 |
| bladeDetailsId mandatory Blade Module Details Table Blade Id. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.2 |
| bladeDetailsMaxPowerConfig mandatory Blade Module Details Table Maximum Power Configuration.
Allow the user to set the maximum power that can be used by the blade. This
function is also known as power capping.
Blade … | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.3 |
| bladeDetailsMaximumClockRate mandatory Blade Module Details Table Maximum CPU Clock Rate applies to DPM
blades only. It displays processor's maximum clock rate based
on sample interval. Note that some blades do not m… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.5 |
| bladeDetailsPowerSaverMode mandatory When enabled, the static low power saver mode allows the blade to selectively
alter its operating voltage and frequency to reduce power consumption.
This feature is not available … | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.6 |
| bladeDetailsDynamicPowerSaver mandatory When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the blade
to be controlled based on how busy the CPU is. This feature is not available on all bl… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.7 |
| bladeDetailsDynamicPowerFavorPerformanceOverPower mandatory When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the
system past its nominal CPU frequency when CPU and memory utilization impl… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8 |
| bladeDetailsPowerControl mandatory This object is used to get or set the power control setting on a blade.
If dynamic power mgmt is not supported on a blade, notApplicable(255) will be returned.
… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.9 |