cwrRfControlChannelStatus

CISCO-WIRELESS-IF-MIB · .1.3.6.1.4.1.9.9.136.1.5.1.1.16
MIB view Table view

Object

column Enumeration 
Each RF resource has an associated control channel.
The control channel is used to send/receive control information to 
the RF resource. For the RF resouce to operate properly, the control
channel must be established. 
This object indicates the status of the control channel
ok(1)    - RF resource may be controlled successfully
notOk(2) - Cannot talk to the RF resource.

Context

MIB
CISCO-WIRELESS-IF-MIB
OID
.1.3.6.1.4.1.9.9.136.1.5.1.1.16
Type
column
Access
readonly
Status
current
Parent
cwrRfEntry
Table
cwrRfTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ok
2notOk

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cwrRfIndex
This object, along with ifIndex, represents the index of this entry in the cwrRfTable.
columnInteger32.1.3.6.1.4.1.9.9.136.1.5.1.1.1
cwrRfTxOscState
This object represents the state of the transmit oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly.
columnCISCO-WIRELESS-TC-MIBCwrOscState.1.3.6.1.4.1.9.9.136.1.5.1.1.10
cwrRfAntIndex
This object represents the index into the cwrAntennaTable. This object may be 0 if the cwrAntennaTable is not available.
columnInteger32.1.3.6.1.4.1.9.9.136.1.5.1.1.11
cwrRfRxOscState
This object represents the state of the receive oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly.
columnCISCO-WIRELESS-TC-MIBCwrOscState.1.3.6.1.4.1.9.9.136.1.5.1.1.12
cwrRfTemperature
This object represents the current temperature of the RF unit.
columnDegrees Centigrade Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.13
cwrRfSupplyVoltageState
This object specifies whether the voltage supply to the RF unit is within specifications or not.
columnEnumeration.1.3.6.1.4.1.9.9.136.1.5.1.1.14
cwrRfStatus
This object specifies whether the RF resource is functioning properly or not. If it is functioning properly then it will be online(1), else offline(2).
columnEnumeration.1.3.6.1.4.1.9.9.136.1.5.1.1.15
cwrBurstSizeGroup
This object indicates the range or burst sizes supported by the ODU. This information is read from the ODU EEPROM. The user may set the cwrBurstSize MIB object in the cwrRadio…
columnOctetString.1.3.6.1.4.1.9.9.136.1.5.1.1.17
cwrRfResIndex
This object represents the index into CwrRfEntityTable. This index identifies the radio frequency resource.
columnInteger32.1.3.6.1.4.1.9.9.136.1.5.1.1.2
cwrRFOpMode
This object indicates if this RF resource is being used to either receive, transmit, or both.
columnEnumeration.1.3.6.1.4.1.9.9.136.1.5.1.1.3
cwrTxFreqRangeMin
This object represents the minimum frequency at which this RF resource can transmit.
column10 kHz Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.4
cwrTxFreqRangeMax
This object represents the maximum frequency at which this RF resource can transmit.
column10 kHz Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.5
cwrRxFreqRangeMin
This object represents the lowest transmission frequency this RF resource can receive.
column10 kHz Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.6
cwrRxFreqRangeMax
This object represents the highest transmission frequency that this RF resource can receive.
column10 kHz Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.7
cwrMinTxPower
This object represents the minimum power that the RF subsystem can supply the antenna.
columndBm Decibel milliwatts Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.8
cwrMaxTxPower
This object represents the maximum power that the RF subsystem can supply the antenna.
columndBm Decibel milliwatts Integer32.1.3.6.1.4.1.9.9.136.1.5.1.1.9