cwrRfEntry
CISCO-WIRELESS-IF-MIB ·
.1.3.6.1.4.1.9.9.136.1.5.1.1
Object
row
This represents one entry in the cwrRfTable. This table is largely
a read only table which provides details on the state of radio
frequency resources available on the system.
Physically each RF resource may be realized by one antenna
and its associated control hardware. A single antenna and its
associated electronics may act as more than 1 RF resource.
When an RF resource acts as both a transmit and receive resource,
the transmit and receive frequency ranges may overlap.
It is indexed by the ifIndex and cwrRfIndex.
Context
- MIB
- CISCO-WIRELESS-IF-MIB
- OID
.1.3.6.1.4.1.9.9.136.1.5.1.1- Type
- row
- Status
- current
- Parent
- cwrRfTable
- Table
- cwrRfTable
- Children
- 17
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwrRfIndex This object, along with ifIndex, represents the index of
this entry in the cwrRfTable. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.1 |
| cwrRfTxOscState This object represents the state of the transmit oscillator. The
oscillator must be in oscillatorOk(1) state for the system to
function properly. | column | CISCO-WIRELESS-TC-MIBCwrOscState | .1.3.6.1.4.1.9.9.136.1.5.1.1.10 |
| cwrRfAntIndex This object represents the index into the cwrAntennaTable. This
object may be 0 if the cwrAntennaTable is not available. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.11 |
| cwrRfRxOscState This object represents the state of the receive oscillator. The
oscillator must be in oscillatorOk(1) state for the system to
function properly. | column | CISCO-WIRELESS-TC-MIBCwrOscState | .1.3.6.1.4.1.9.9.136.1.5.1.1.12 |
| cwrRfTemperature This object represents the current temperature of the RF unit. | column | Degrees Centigrade Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.13 |
| cwrRfSupplyVoltageState This object specifies whether the voltage supply to the RF unit is
within specifications or not. | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.5.1.1.14 |
| cwrRfStatus This object specifies whether the RF resource is functioning
properly or not. If it is functioning properly then it will be
online(1), else offline(2). | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.5.1.1.15 |
| cwrRfControlChannelStatus Each RF resource has an associated control channel.
The control channel is used to send/receive control information to
the RF resource. For the RF resouce to operate properly, th… | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.5.1.1.16 |
| cwrBurstSizeGroup This object indicates the range or burst sizes supported by the
ODU. This information is read from the ODU EEPROM. The user may
set the cwrBurstSize MIB object in the cwrRadio… | column | OctetString | .1.3.6.1.4.1.9.9.136.1.5.1.1.17 |
| cwrRfResIndex This object represents the index into CwrRfEntityTable. This
index identifies the radio frequency resource. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.2 |
| cwrRFOpMode This object indicates if this RF resource is being used to either
receive, transmit, or both. | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.5.1.1.3 |
| cwrTxFreqRangeMin This object represents the minimum frequency at which this
RF resource can transmit. | column | 10 kHz Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.4 |
| cwrTxFreqRangeMax This object represents the maximum frequency at which this
RF resource can transmit. | column | 10 kHz Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.5 |
| cwrRxFreqRangeMin This object represents the lowest transmission frequency this RF
resource can receive. | column | 10 kHz Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.6 |
| cwrRxFreqRangeMax This object represents the highest transmission frequency that
this RF resource can receive. | column | 10 kHz Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.7 |
| cwrMinTxPower This object represents the minimum power that the RF subsystem
can supply the antenna. | column | dBm Decibel milliwatts Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.8 |
| cwrMaxTxPower This object represents the maximum power that the RF subsystem can
supply the antenna. | column | dBm Decibel milliwatts Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| cwrRfIndex This object, along with ifIndex, represents the index of
this entry in the cwrRfTable. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.5.1.1.1 |